List of Updates in Windows 32-bit Service Pack (SP6)

This page lists the Windows 32-bit updates that are included in this Service Pack. New updates in this Service Pack are highlighted.

41548 Installed on : MediaAgent
  1. VSA backups to a linux MA may fail.
  2. Additional Instructions
    none
41547 Installed on : All
  1. Fix for CVD service crash when there is no connectivity to CommServer.
41545 Installed on : Exchange Public Folder iDataAgent 2003, Exchange Public Folder iDataAgent 2000
  1. Exchange Public Folder backup goes pending if service account does not have permission to access some folders.
  2. For Exchange Public Folder, some plaintext messages with unicode characters would get restored with garbage characters.
41540 Installed on : CommServe, MediaAgent
  1. Deconfiguration of Media Agent or Drive Pool may fail with error "Failure during delete operation on CS DB" if all drives of a drivepool were deconfigured separately earlier.
  2. Storage policy copy may not be pointing to any datapath if its associated disk library was deconfigured.
  3. Deconfiguration of Drive Pool of a tape library may fail with error "Failure during delete operation on CS DB".
41537 Installed on : File System iDataAgent for Windows
  1. Add support for auto registration.
41532 Installed on : SharePoint iDataAgent
  1. Backup of certain views using Direct Database Access fails with error "View does not exist" or "List does not exist". Views failed with "View does not exist" will be skipped.
    Views failed with other error than "View does not exist" will be logged only if DWORD registry key bEnableViewBackupErrorReporting set to 1 and SPDocBackup_debuglevel set to 4.
  2. Backup job using Direct Database Access fails as we hit a view which gets skipped as it is deleted.
41524 Installed on : All
  1. Windows network Mountpaths for the disk libraries may go offline due to access failures.
(Critical) 41522 Installed on : CommServe Database, CommServe Database
  1. Optimize resource reservation performance especially when there are large number of jobs initiated from schedule policies.
41521 Installed on : CommCell Console, Web Server
  1. Virtual Server Agent job details may show an extra tab called "Client Status".
(Critical) 41518 Installed on : All
  1. Removing binary CvSqlsmoFactory.dll from GAC registration
41515 Installed on : MediaAgent
  1. LSI SnapProtect job may fail in mount phase if the host group is clustered.
(Critical) 41512 Installed on : CommServe Database
  1. Partially content indexed jobs show up as successful (fully content indexed) in GUI console.
41508 Installed on : All
  1. Fix to handle empty value in sBindToInterface registry key.
  2. Mount path may be offline if the base folder is set to the name "CV_MAGNETIC".
  3. Event Manager Service on the CommServe may terminate unexpectedly while replacing a tape drive using Library & Drive Configuration Tool.
  4. Event Manager Service on the CommServe may terminate unexpectedly while detecting NDMP devices using Library & Drive Configuration Tool with registry key DoFailoverDrivePool.
  5. Fixing possible issue by update 12838: Optimizations to client services to improve CS CVD performance.
  6. Oracle restore fails intermittently with semaphore id collision.
  7. Laptop backup configuration performance improvements
  8. More number of server calls are done when client services are started, hence randomizing the calls.
  9. Optimizations for "Prune Records" phase of DeDup Reconstruction job.
  10. "Prune Records" phase of DeDup Reconstruction job may go pending due to DB error when there is a large number of prunable data.
  11. Pruning optimization for static shared mountpaths.
  12. High volume of message transaction between Client and CommServ is reducing CommServ performance.
  13. Size on media on a dedup copy may show incorrect values.
41507 Installed on : CommServe Database
  1. Size on media on a dedup copy may show incorrect values.
41504 Installed on : Exchange Mailbox iDataAgent 2000, File System NDMP Restore Enabler, Exchange Mailbox iDataAgent 2003, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, File System iDataAgent for Windows, PrimaryCIForExchange, Data Archiver Agent for Exchange 2003, DataArchiver Agent for Exchange, MediaAgent
  1. Content Indexing jobs are failing as the auxcopy.exe process is crashing on the media agent.
  2. Restore of a message may fail when PR_INTERNET_REFERENCE property is large.
  3. Fix for crash during Exchange Mailbox or Archiver backup when MAPI call fails.
  4. Some messages are restored with no body.
41503 Installed on : All
  1. Support non default NLS_LANG on windows.
  2. Additional Instructions
    Set registry key _NLS_LANG registry key under OracleAgent section to use NLS_LANG with American language such as AMERICAN_AMERICA.UTF8
41500 Installed on : MediaAgent
  1. Snap backups using 3PAR arrays may fail if the 13th digit of the Array ID is non-zero.
  2. Snap Backup support for FUJITSU Eternus arrays on Windows platforms.
41495 Installed on :
  1. Snap Backup support for FUJITSU Eternus arrays on Windows platforms.
41492 Installed on : MediaAgent2003, CommServe, Web Server, MediaAgentXP, File System iDataAgent for Windows, MediaAgentNT, VirtualServerAgent, MediaAgent
  1. Skip the virtual machine swap file during revert operation.
  2. Registry key support to override the proxy ESX server provided on the sub client for SnapProtect.
  3. VMs with VMDKs that have the same name differing only by case will gracefully fail.
  4. Registry key support to disable VM Quiesce while taking software snapshot.
  5. Additional Instructions
    2.In order to override the sub client proxy ESX server, please create following registry key from commcell console. Right Click on Client Properties-> Registry Key Settings Tab-> Add the following: Name :sProxyESX Location :VirtualServer Type :REG_SZ Value :Esx server name or IP address 4.In order to disable VM Quiesce while taking software snapshot, please create following registry key from commcell console. Right Click on Client Properties-> Registry Key Settings Tab-> Add the following: Name :VwSkipQuiesceVM Location :VirtualServer Type :REG_DWORD Value :1
41491 Installed on : CommServe Database
  1. QCommands may not work for the DB2 and SQL agents.
41486 Installed on : MediaAgent
  1. Few of Exchange emails failed to be content indexed due to RTF uncompression failure.
  2. Aux copy process for Lotus Notes emails crashes
  3. DDB Reconstruction job fails in the Add records phase if datapath block size is more than 512KB.
  4. Communication Service (cvd) on the media agent may exit ungracefully during dedup backups when all disk mount paths run completely out of space.
41485 Installed on : CommCell Console, Web Server
  1. Adding support for Hotfix install and uninstall
41480 Installed on : All
  1. If there are clients in an OSC Automatic install updates jobs in progress ( file copy or installupdate), waiting, pending, let it continue until JobManager terminates it after exceeding the maximum run time.
  2. Adding support for Hotfix install and uninstall
41475 Installed on : CommServe Database
  1. Adding support for Hotfix install and uninstall
(Critical) 41470 Installed on : CommServe Database, CommServe Database
  1. Incremental backup jobs fail if create index and backup phases run on different Media Agent when using NAS library, even if the index cache is shared properly.
  2. Resources are not allocated in a timely manner when there are a large number of mount paths that do not have resources.
  3. Optimize resource reservation performance especially when there are large number of jobs initiated from schedule policies.
  4. Restore may fail with JPR "Read operation cannot be completed as none of the resources available can be used" when selecting Media Agent and Drive Pool from Advance option tab of Restore job dialog.
41469 Installed on : CommCell Console, Web Server
  1. Added commandline support for Exchange DB subclient.
  2. GUI fix-Make subclient content case insensitive that was created by command line.
  3. Enhanced instance and subclient commandline for multiprocessing. Allow GUI to display the Sybase instance properties dialog when version number of the Sybase instance was not populated while creating instance.
41467 Installed on : Exchange Mailbox iDataAgent 2000, CommServe, ResourcePack, Web Server, Exchange Mailbox iDataAgent 2003, DBUpgrade, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, PrimaryCIForExchange, DataArchiver Agent for Exchange, Data Archiver Agent for Exchange 2003, CommNetServer
  1. Sometimes Media refresh job for NAS data fails with chunk mismatch error.
  2. Enhanced instance and subclient commandline for multiprocessing. Allow GUI to display the Sybase instance properties dialog when version number of the Sybase instance was not populated while creating instance.
41464 Installed on : CommServe Database
  1. The Job Summary Report may produce an error if specific agent types are selected and it is run from a saved script.
  2. Added commandline support for Exchange DB subclient.
  3. GUI fix-Make subclient content case insensitive that was created by command line.
  4. Enhanced instance and subclient commandline for multiprocessing. Allow GUI to display the Sybase instance properties dialog when version number of the Sybase instance was not populated while creating instance.
41460 Installed on : SharePointDM, Exchange 2000 Database iDataAgent, ResourcePack, LotusNotesDM, File archiver driver, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, Outlook Add-In Client, Data Archiver Agent for Exchange 2003, Exchange 2003 Database iDataAgent
  1. Recalls from Add-On Archiver being slower than Regular Archiver.
(Critical) 41456 Installed on : CommCell Console, Web Server
  1. Evmgrs.log may contain assertion errors in the log file after performing a GRC merge.
  2. Resubmitting a GRC job may fail.
  3. Fix a GUI exception when viewing the mount path properties of a library which is currently disabled because no association was made during the GRC import
  4. MediaManager may log errors after a migration
  5. CCMManager.log may show xml errors in the log file.
  6. GRC may capture client groups even if there are no associated clients
  7. Skip capturing snap data for GRC
  8. If when merging a client group the group already exists then the proper prefix was not being used
  9. Capture may take a long time when a lot of backup data is present in the commcell.
(Critical) 41451 Installed on : CommServe
  1. Evmgrs.log may contain assertion errors in the log file after performing a GRC merge.
  2. Resubmitting a GRC job may fail.
  3. Fix a GUI exception when viewing the mount path properties of a library which is currently disabled because no association was made during the GRC import
  4. MediaManager may log errors after a migration
  5. CCMManager.log may show xml errors in the log file.
  6. GRC may capture client groups even if there are no associated clients
  7. Skip capturing snap data for GRC
  8. If when merging a client group the group already exists then the proper prefix was not being used
  9. Capture may take a long time when a lot of backup data is present in the commcell.
(Critical) 41448 Installed on : CommServe Database
  1. Evmgrs.log may contain assertion errors in the log file after performing a GRC merge.
  2. Resubmitting a GRC job may fail.
  3. Fix a GUI exception when viewing the mount path properties of a library which is currently disabled because no association was made during the GRC import
  4. MediaManager may log errors after a migration
  5. CCMManager.log may show xml errors in the log file.
  6. GRC may capture client groups even if there are no associated clients
  7. Skip capturing snap data for GRC
  8. If when merging a client group the group already exists then the proper prefix was not being used
  9. Capture may take a long time when a lot of backup data is present in the commcell.
41444 Installed on : CommServe, Web Server
  1. Alert configured for 'Job Management - Data Protection' randomly does not send Alert for Successful Backup Jobs.
  2. Even though a job has not failed or interrupted, it sent an alert that the job was interrupted.
  3. The users are having trouble suspending or resuming jobs started from the schedule
41436 Installed on : CommServe, File System iDataAgent for Windows, Web Server
  1. Modifying a schedule that has already run same week or month may cause one runtime to be skipped.
  2. Schedules may not run if DB exception happened during previous job submission.
  3. Enhancements and fixes to Mobile Job Controller
41435 Installed on : CommServe Database
  1. Content/filter added from webconsole for subclient not associated with subclient policy doesn't get saved.
  2. Performance Improvement for WebConsole Login
  3. Enhancements and fixes to Mobile Job Controller
(Critical) 41431 Installed on : CommServe Database
  1. Disabled to-be-copied jobs may not age properly.
41428 Installed on : All
  1. Added commandline support for Exchange DB subclient.
  2. GUI fix-Make subclient content case insensitive that was created by command line.
41422 Installed on : CommServe Database
  1. Schedule policy with schedules that follow client timezone may not run for all timezones.
(Critical) 41415 Installed on : CommServe
  1. Upgrade may fail if there is an invalid schedule next run time
41414 Installed on : CommServe Database
  1. Job options from deleted schedules may not get pruned.
(Critical) 41409 Installed on : MediaAgent
  1. For EMC Symmetrix TimeFinder/Clone, when one of the target devices is in Copied state, the Symmetrix Clone engine may fail attempting to try create operation
  2. Revert operation for Symmetrix may take a long time to complete.
  3. To allow log revert to happen on a registry sREVERTARCHIVELOG set to Y under OracleAgent
  4. For EMC Symmetrix TimeFinder/Clone, instead of incremental sync, a full synchronization may happen for the subsequent clone operation
  5. Enhancement to skip the unmap of snap/clone devices during unmount operation
41406 Installed on : MediaAgent
  1. DDB Backups may fail with the error: "Failed to quiesce DDB".
(Critical) 41394 Installed on : All
  1. Generating a stronger network password.
  2. Client push install might fail. Commcell Configuration report may fail to run.
  3. reinstall/delete clients should be allowed only to client owners.
(Critical) 41388 Installed on : CommServe Database
  1. Sometimes Media refresh job for NAS data fails with chunk mismatch error.
41385 Installed on : CommServe Database
  1. Job Summary Reports Show Data for client Groups with 0 Members
41380 Installed on : CommCell Console, Web Server
  1. Recover Store job options provided in the GUI may not be handled correctly.
  2. Show deconfigured clients in the client selection panel of Commcell Migration export gui
  3. Additional Instructions
    View De-Configured clients in CCM-Export GUI is controlled by GUI option "control panel -> user preference -> Hide De-configured clients"
  4. Native SQL compression option is not available for latest SQL version(SQL 2012 Denali)
  5. GUI hangs on creating multiple instances for Informix Agent.
  6. Enhancement to support job history for reports.
  7. Additional Instructions
    To enable this feature create following registry key in commserve section(In commserv machine) Name : JMReportCreateStats Type : Dword Value: 1 To disable this feature remove the registry key or set the value as zero
41376 Installed on : All
  1. Media are being marked as Full although there is still space available on them for use with jobs initiated from schedule policy
  2. Fix intermittent issue with Backup Monitor getting placed at the top left corner of the display on windows.
  3. Fix for Laptop monitor to honor user credentials from RegisterMe process.
  4. Fix truncated strings for Backup Monitor start button on Japanese and other languages.
  5. Virtualize ME job stays in waiting state at 100% even though the job has completed successfully.
  6. Virtualize ME job may fail if CS services are restarted and child restore job can get stuck sometimes without the master job.
  7. Improves automatic scheduling of Install Updates where clients could be included in multiple Install Update jobs. Fixes an issue where pending/failed clients would create a new job while the current one was running
  8. Enhancement to support job history for reports.
  9. Additional Instructions
    To enable this feature create following registry key in commserve section(In commserv machine) Name : JMReportCreateStats Type : Dword Value: 1 To disable this feature remove the registry key or set the value as zero
41375 Installed on : CommServe Database
  1. Fix for Fastpass discovered jobs to have correct internal cycle/sequence numbers so that data aging after migration of such clients would work properly.
41372 Installed on : All
  1. Archiver backup jobs are slow in Stubbing phase
  2. VSA agents showing incorrect size on ext3 filesystem for files larger than 4 GB during browse and also restores incomplete files.
(Critical) 41363 Installed on : CommServe Database
  1. Optimizations for "Prune Records" phase of DeDup Reconstruction job.
  2. "Prune Records" phase of DeDup Reconstruction job may go pending due to DB error when there is a large number of prunable data.
  3. Pruning optimization for static shared mountpaths.
41361 Installed on : All
  1. Support for Parallel Snap Mining jobs.
  2. Enhancement of only one job preparing the software snap, and all other concurrent job reusing it
  3. For SnapMining, whether to backup a Mailbox or not to be decided on Mailbox GUID rather than Mailbox DN
  4. Fixed crash due to MAPI stream error.
  5. Messages with file attachments whose names contain Unicode characters (Russian, Japanese, etc.) were backed up with spaces in the name instead.
  6. Additional Instructions
    By default, snap mining jobs which will use the same set of snapshots as an already running job will wait for 15 minutes so the first job has a chance to prepare the snapshot. To change this timeout you can set the following key
    Name: WAITTIME_PARALLEL_SNAPMINING
    Location: \MSExchangeMBAgent or \MSExchangeMBDMAgent depending on the agent installed
    Type: DWORD
    Value: time in minutes to wait between attempts to prepare the snapshot for concurrently running snap mining jobs.

    In extreme cases the initial snap may take too long to prepare if log replay takes many hours. By default the other snap mining jobs running parallel will wait up to 6 hours for that snap to be prepared before beginning the preparation on their own. . To change this timeout set the following key
    Name: TIMEOUT_PREPARATION_PARALLEL_SNAPMINING
    Location: \MSExchangeMBAgent or \MSExchangeMBDMAgent depending on the agent installed
    Type: DWORD
    Value: time in minutes to wait for the first job to finish preparation before each job will run preparation on its own.
(Critical) 41356 Installed on : CommServe Database, CommServe Database
  1. Support Job Summary for report jobs via qoperation command.
41351 Installed on : All
  1. Add support for strip level option of the source path to the File system "Restore By Jobs" feature.
(Critical) 41337 Installed on : CommServe Database
  1. Improves automatic scheduling of Install Updates where clients could be included in multiple Install Update jobs. Fixes an issue where pending/failed clients would create a new job while the current one was running
(Critical) 41333 Installed on : CommServe Database
  1. Enhancement for reporting license usage including Protected Mailboxes, Archived Mailboxes and Search Mailboxes using a Commnet database script.
(Critical) 41324 Installed on : CommServe SNMP Enabler, CommNetSMPEnabler
  1. Cannot compile simpana.mib with mcompile utility from HP Systems Insight Manager.
  2. Additional Instructions
    None.
41323 Installed on : CommServe
  1. Failure to save Reports on network share
  2. Backup job summary report might not run in case there exists clients with multiple owners associated with them.
41321 Installed on : CommCell Console, Outlook Add-In Client, Web Server
  1. Notes Archiver restore job goes pending even though all data is restored. From the subclient-level browse window, if user select a parent folder for restore, entire archive-set content is restored.
  2. Results of browse from outlook add-in may not be the same as seen from the Commcell console.
(Critical) 41314 Installed on : CommServe Database
  1. Grouping of Vault tracker Policy report not taking effect.
41313 Installed on : All
  1. SRM Solaris Discovery job may fail when Solaris Volume Manager Mirror volumes exists.
41309 Installed on : All
  1. Snap Backup using Dell Compellent arrays may cause the Media Mount manager service to crash while reading Host-Server info from array.
(Critical) 41302 Installed on : CommServe Database
  1. Tapes with NAS Backups may not return to the default scratch pool after the jobs are aged.
41298 Installed on : Web Client
  1. Enhancements for VM Provisioning feature.
  2. Performance Improvement for WebConsole Login
41297 Installed on : CommServe, File System iDataAgent for Windows, Web Server
  1. Performance Improvement for WebConsole Login
(Critical) 41284 Installed on : CommServe, VirtualServerAgent
  1. VM discovery interval is changed from 15 minutes to every 24 hours.
41282 Installed on : CommNetBrowser
  1. The PDF format of CommNet Dashboard Report, the titles may have the wrong Commcell.
(Critical) 41263 Installed on : CommCell Console, Web Server
  1. Case-insensitive search option not honored with Find.
41253 Installed on : All
  1. Browsing the back up data for the jobs with archive index phase failure may fail.
  2. Support for multi streamed backupcopy jobs for Snap Protect for SQL and Exchange.
  3. a. Monikers for well known folders were not expanded when parsing new content items, so were not properly affecting what was included as new content on incremental jobs.
  4. b. Turbo jobs were improperly including new content.
  5. Backup job may fail to backup locked files that reside in a mount point even if the option to use VSS is checked
  6. IFind.exe crashes in non-full backups while processing failed items from previous jobs.
  7. Additional Instructions
    For 5. The failures.cvf file is to be removed before starting a non-full job with this update.
(Critical) 41250 Installed on : CommServe Database
  1. Enhancements for VM Provisioning feature.
41238 Installed on : All
  1. Machine may crash when performing a VSS snapshot operation on a system where a volume larger than 64 terabytes is present.
  2. Backup operation hangs indefinitely when VSS core service is unresponsive.
  3. SQL 2012 support for SQL iDA.
(Critical) 41236 Installed on : Exchange Mailbox iDataAgent 2000, CommServe, Web Server, Exchange Mailbox iDataAgent 2003, DBUpgrade, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, DataArchiver Agent for Exchange, Data Archiver Agent for Exchange 2003, PrimaryCIForExchange
  1. For a user, only clients that are associated with the user-group that user belongs to are visible under Client Computers, new Client Group dialog, new Schedule Policy dialog and new Alert dialog (from Control Panel). Master user has full view capability, while a non-master user would have a slightly restricted view. He would only be able to see limited icons in the control panel. He would also not be able to access the Add/Remove software Config option from Install Software menu(from Tools tab too). CV_Restricted_View group functionality should not get affected.
  2. AD group with Unicode characters, is not listed in external groups list while configuring for Name Server
  3. GxGlobalparam and appmanager change that honors the value for all new 9.0 install for number of streams.
  4. Viewing associated clients for a software cache takes a long time.
(Critical) 41235 Installed on : CommServe Database
  1. Viewing associated clients for a software cache takes a long time.
(Critical) 41220 Installed on : All
  1. Failed to release SharePoint license on 7.0 clients.
41217 Installed on : File archiver driver
  1. CVSystemTray does not load automatically when a user logs on to a Windows 2008 R2 server.
41203 Installed on : ContentIndexingServer
  1. CVD runs out of memory during content indexing job if memory mode feeding is enabled
  2. Additional Instructions
    In order to enable the use of new Push API to feed the data specify following registry key at "HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\\Machines\\ContentIndexingServer" Name: UseNewApi Type: DWORD Value: 1
41202 Installed on : All
  1. Incremental backups after synthetic full may show some failures related with System State "offline files"
41198 Installed on : All
  1. All destination Data for SDR Pair was Erased during Orphan File Handling when differencing option is OFF.
  2. Additional Instructions
    This update NEEDS to be applied on source and destination machines. If the update is applied only on the destination and not on the source, then orphaning will fail for the pairs with the following message. "Not proceeding with orphan processing because an error was previously encountered during dirchange checksum comparison" If the update is applied on source and not on destination, then the old style orphaning will still be honoured but the global parameter for the dirchange checksum in the GlobalParams on the CS DB will never be cleaned up.
(Critical) 41192 Installed on : CommServe Database
  1. CommCell Configuration Report should exclude clients that do not have the user selected agents.
(Critical) 41187 Installed on : CommServe Database
  1. Deconfiguring a mount path should be allowed when it is used for both deduped and non deduped data and all the data is prunable.
(Critical) 41178 Installed on : All
  1. Logs are not being replayed after Exchange OOP restore completes successfully.
  2. Restore from back copy to another database fail.
41166 Installed on : CommServe Database
  1. Firewall stored procedures are taking time to execute on CS
41158 Installed on : CommCell Console, Web Server
  1. Event Manager Service on the CommServe may terminate unexpectedly while replacing a tape drive using Library & Drive Configuration Tool.
(Critical) 41146 Installed on : CommServe Database, CommServe Database
  1. Capacity usage based licensing was incorrectly counting instances sometimes.
(Critical) 41142 Installed on : CommServe, Web Server
  1. Disable DBCC traceon for DR backup. It can be turned on through registry key "enableTraceOnForDR".
  2. Additional Instructions
    Add dword registry key "enableTraceOnForDR" under HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\\Database set it to 1 to enable the trace, set it to 0 to disable. Trace is disabled by default if the key does not exist.
(Critical) 41135 Installed on : MediaAgent
  1. SIDB Simulator graph may not show properly when a long path is selected for CVdiskperf or SIDB path
  2. Additional Instructions
    Note, on Windows 2008 and later, the simulation GUI JAR file needs to be started from command line.
41132 Installed on :
  1. Enabling the media management configuration parameter 'Wait for scheduler to update the next scheduled backup time before making an auxcopy job selection' that will enable a fix for a selective aux-copy. This has to be disabled only if product development team advises so.
(Critical) 41128 Installed on : CommServe Database
  1. Content Indexing may pick jobs from all subclients within Incremental Storage Policies and the user may not have the option to pick the subclients they want to content index if the association is via incremental storage policy.
(Critical) 41124 Installed on : CommServe
  1. Make displayed messages clearer when attempting to move an index cache while jobs are still running.
  2. Allow adding a media agent to a network share profile when jobs are suspended.
  3. Changing the index configuration from a local index cache to a network share and the other way round was not possible even if all jobs for a media agent were suspended. Now allow this.
  4. When ever a media agent is associated with a index cache profile,we should not be allowed to make that a catalog server unless the association is removed.
  5. We should not be allowed to promote or Demote any Media Agent to/from Index cache server when it is offline.
41121 Installed on : CommServe Database
  1. User Capabilities report as well as Commcell Configuration report are displaying internal users
(Critical) 41120 Installed on : CommNet Server
  1. Billing Entity Not Associating To Client Correctly in CommNet Billing Association report.
41115 Installed on : SharePointDM, SRMSharePointAgent, SharePoint iDataAgent
  1. SharePoint Document Restore fails with error 'value does not fall within the expected range' for lists on non-English setups.
(Critical) 41114 Installed on : CommServe
  1. Fixes for uninstalling some unix flavors like hp. Base might not get cleaned up after uninstall due to busy cvfwd.
(Critical) 41107 Installed on : All
  1. The file copy log line should be logged once every 50 files in the high debug mode.
(Critical) 41103 Installed on : CommServe Database
  1. User may be able to see client groups for which user does not have rights
41093 Installed on : CommServe
  1. Virtualize Me Job for Physical client with windows 2008 R2 Datacenter OS might not load OS correctly.
41077 Installed on : MediaAgent
  1. Jobs going to a tape library may fail with error "The SCSI device reported source element is empty" or "The SCSI device reported destination element is full."
(Critical) 41065 Installed on : All
  1. Recover Store job options provided in the GUI may not be handled correctly.
41063 Installed on :
  1. Installation of any service pack after SP2b may fail to install Update 35472.
  2. Installation of any service pack after SP2b may fail to install Update 35472. After installing the Service Pack on the CommServe and CommNet Server, Update 35472 may be shown as an additional update in the CommServe version tab. This is a display issue and can be resolved by installing this update.
41058 Installed on : CommCell Console, Web Server
  1. For a user, only clients that are associated with the user-group that user belongs to are visible under Client Computers, new Client Group dialog, new Schedule Policy dialog and new Alert dialog (from Control Panel). Master user has full view capability, while a non-master user would have a slightly restricted view. He would only be able to see limited icons in the control panel. He would also not be able to access the Add/Remove software Config option from Install Software menu(from Tools tab too). CV_Restricted_View group functionality should not get affected.
41052 Installed on : CommServe Database
  1. For a user, only clients that are associated with the user-group that user belongs to are visible under Client Computers, new Client Group dialog, new Schedule Policy dialog and new Alert dialog (from Control Panel). Master user has full view capability, while a non-master user would have a slightly restricted view. He would only be able to see limited icons in the control panel. He would also not be able to access the Add/Remove software Config option from Install Software menu(from Tools tab too). CV_Restricted_View group functionality should not get affected.
(Critical) 41042 Installed on : CommServe Database
  1. GUI hangs when trying to run Data retention and forecast report.

DISCLAIMER

Products in Germany are not distributed using the "QNet" brand.

In Deutschland werden keine Produkte der Marke "QNet" mehr vertrieben.