System Messages, Event Strings and Error Codes

Alert Comment Messages

Alert Messages

Archive Manager Messages

Archive Manager Errors

CommCell Migration

CommNet Alert

CommNet Browser

CommNet Licensing

CommNet QSM

CommNet Registration

CommNet Scheduler

Common Event Messages

CommServe License Manager

Data Set Manager

Content Indexing

DataPipe

Communications Service

Remote Exec Client

Install Manager

Library and Drive Configuration

Media Management Service

Network Module

Connection Manager

SAN Volume Configuration

Meta-Data Database

Data Classifier Client

Documentum iDataAgent

Datamover

CommServe Disaster Recovery

External Data Connector

EvArchive Manager

EvLibrary Controller

EvMedia Manager

Event Manager Client

Event Manager Server

Restore iDataAgent

Firewall Port Reservations

File Replication Messages

Backup iDataAgent

File System Backup iDataAgent

File System Restore iDataAgent

General

GUI Audit Operations

GUI Audit Parameters

GUI Messages

Index Manager

Informix iDataAgent

Image Level iDataAgent

Job Manager Service

Lotus Notes

Media Library Manager

Media Manager Messages

Media Manager Errors

Media Manager

Media Manager Events

MS Exchange Backup iDataAgent

MS Exchange Restore iDataAgent

MS SQL iDataAgent

MySQL iDataAgent

NAS Client Wizard

iDataAgent for NDMP

1-Touch Messages

Oracle iDataAgent

Pass Thru

Patch

Platform Information Module

PostgreSQL iDataAgent

CommNet

Replication Client

Reports

Simple Data Transfer Pipeline

Software Installation Manager

SRM Advice Locale

SRM Error Locale

SRM Locale

SRM Report Locale

Sybase iDataAgent

VSB Locale

Alert Comment Messages

Code Description
83:1 IIS Server Name changed from [<String>] to [<String>].
83:2 IIS Server Install Location changed from [<String>] to [<String>].
83:3 IIS Server Books Online Alias changed from [<String>] to [<String>].
83:4 Use alternate IIS Server option was Deselected.
83:5 Use alternate IIS Server option was Selected.
83:6 IIS Server User Name changed from [<String>] to [<String>]
83:7 IIS Server User Password was changed.
83:8 Maintenance Advantage User Name changed from [<String>] to [<String>]
83:9 Maintenance Advantage User Password was changed.
83:10 KB Link for JPR User Name changed from [<String>] to [<String>]
83:11 KB Link for JPR User Password was changed.
83:12 Job Controller Job Retention Time changed from [<Number>] to [<Number>].
83:13 Scheduler has been enabled.
83:14 Scheduler has been disabled.
83:15 SNMP Traps Support has been enable and is set to [<Number>].
83:16 SNMP Traps Support has been disabled.
83:17 Audit Trail Recording Level has been enable and is set to [<Number>].
83:18 Audit Trail Recording has been disabled.
83:19 Audit Trail Recording Level changed from [<Number>] to [<Number>].
83:20 Audit Trail retention time changed from [<Number>] to [<Number>] days.
83:21 Jobs Complete Past Operational Window Option changed from [<String>] to [<String>].
83:22 Jobs Complete If Activity Disabled Option changed from [<String>] to [<String>].
83:23 Queued Jobs if activity is disabled was [<String>].
83:24 Queue Jobs If Other Jobs Running Option changed from [<String>] to [<String>].
83:25 Disable Software Update Reboot Option changed from [<String>] to [<String>].
83:26 ER Storage Policy changed to [<String>].
83:27 Express Recovery user name changed from [<String>] to [<String>].
83:28 Mail Server changed from [<String>] to [<String>].
83:29 Sender's Address changed from [<String>] to [<String>].
83:30 SMTP Port number changed from [<Number>] to [<Number>].
83:31 SMTP Max Message Size changed from [<Number>]KB to [<Number>]KB.
83:32 Express Recovery User name and password deleted.
83:33 Express Recovery user password was changed.
83:34 Maximum Events in event log changed from [<Number>] to [<Number>].
83:35 GUI Timeout changed from [<Number>] to [<Number>].
83:36 GUI Timeout after [<Number>] minutes idle has been turned on.
83:37 GUI Timeout has been turned off.
83:38 GUI Timeout changed from [<Number>] to [<Number>] minutes idle.
83:39 Job Alive Retry changed from [<Number>] to [<Number>].
83:40 Job Alive check interval changed from [<Number>] to [<Number>].
83:41 Job high watermark changed from [<Number>] to [<Number>].
83:42 Job low watermark changed from [<Number>] to [<Number>].
83:43 Job Priority Precedence Changed
83:44 Queue Scheduled Jobs Option has been <String>.
83:45 Backup preemption of other backups has been <String>.
83:46 Restore preemption of other jobs has been <String>.
83:47 Auxiliary Copy preemption of other jobs has been <String>.
83:48 Backup preemption of Auxiliary Copy and Synthetic Fulls has been <String>.
83:49 [<String>] priority changed from [<Number>] to [<Number>].
83:50 Express Recovery Destination Directory changed to [<String>].
83:51 Disaster Recovery Number of Fulls changed from [<Number>] to [<Number>].
83:52 Database Space Check Interval changed from [<Number> hour(s) <Number> minute(s)] to [<Number> hour(s) <Number> minute(s)].
83:53 Database Space Check Informational Percent Free changed from [<Number>] to [<Number>].
83:54 Database Space Check Minor Percent Free changed from [<Number>] to [<Number>].
83:55 Database Space Check Major Percent Free changed from [<Number>] to [<Number>].
83:56 Database Space Check Critical Percent Free changed from [<Number>] to [<Number>].
83:57 Data Replicator Update Interval changed from [<Number>] to [<Number>].
83:58 Data Classification Update Interval changed from [<Number>] to [<Number>].
83:59 Visibility Checking has been <String>.
83:60 Use exact index for restore has been <String>.
83:61 DR PreScan Command changed from [<String>] to [<String>].
83:62 DR PostScan Command changed from [<String>] to [<String>].
83:63 DR PreBackup Command changed from [<String>] to [<String>].
83:64 DR PostBackup Command changed from [<String>] to [<String>].
83:65 DR Backup Pre/Post User changed.
83:66 'Use Pre/Post user' option for DR Backup changed to [<String>].
83:67 DR Backup Pre/Post Password changed.
83:68 Attempt to modify <String> denied <String>.
83:69 <String> operations on this CommCell have been <String>.
83:70 Volume Creation
83:71 Data Protection
83:72 Volume Recovery
83:73 Data Recovery
83:74 Auxiliary Copy
83:75 CommServe ER Backup
83:76 Data Aging
83:77 Media Recycling
83:78 Synthetic Full
83:79 All
83:80 Schedule Export
83:81 Media Inventory
83:82 Reporting
83:83 Scheduling
83:84 Online Content Indexing
83:85 Offline Content Indexing
83:86 Unknown
83:87 enabled
83:88 disabled
83:89 yes
83:90 no
83:91 Content Changed.
83:92 Auto Suppress Web Restores Option changed from [<String>] to [<String>].
83:93 Network Error Retry Option changed to [<String>].
83:94 Network Error Retry Frequency changed from [<Number>] to [<Number>].
83:95 Network Error Retry Count changed from [<Number>] to [<Number>].
83:96 Secure Agent install has been [<String>].
83:97 CSVDE filtering option changed from [<String>] to [<String>].
83:98 Client Encryption Restore Access is [<String>], changed from [<String>].
83:99 Client Encryption DRTool Access is [<String>], changed from [<String>].
83:100 Client Encryption Enable Synthetic Full is changed to [<String>] from [<String>].
83:101 Client Encryption Cipher is [<String>], changed from [<String>].
83:102 Client Encryption Key Length is [<Number>], changed from [<Number>].
83:103 Replication Set [<String>] added.
83:104 Destination Host changed from [<String>] to [<String>].
83:105 Common Base Folder changed from [<String>] to [<String>].
83:106 Use Common Folder changed to [<String>].
83:107 PreBackup Command changed from [<String>] to [<String>].
83:108 PostBackup Command changed from [<String>] to [<String>].
83:109 Pre/Post User changed.
83:110 'Use Pre/Post user' option changed to [<String>].
83:111 Pre/Post Password changed.
83:112 Initial File Transfer changed to [<String>].
83:113 Replicate Data in Remote Storage changed to [<String>].
83:114 Compression changed to [<String>].
83:115 Encryption changed to [<String>].
83:116 Follow Mountpoints changed to [<String>].
83:117 Include ACLs changed to [<String>].
83:118 Allow Consistency Points changed to [<String>].
83:119 Auto Mount Snapshot changed to [<String>].
83:120 Snap Engine for Recovery Point Creation changed to QSnap.
83:121 Snap Engine for Recovery Point Creation changed to VSS.
83:122 Automatic Resync changed to [<String>].
83:123 Orphan Handling changed to [<String>].
83:124 Log Filenames changed to [<String>].
83:125 Delete Orphans changed to [<String>].
83:126 Maximum Consistency Points changed from [<Number>] to [<Number>].
83:127 User changed.
83:128 Password changed.
83:129 Filters changed.
83:130 Base Mount Path changed from [<String>] to [<String>].
83:131 CIFS Share changed from [<String>] to [<String>].
83:132 Storage Policy for Consistency Points Backups changed.
83:133 Attempt to modify Global Filters denied.
83:134 Global Filters modified.
83:135 [<String>] CommCell Operation Windows Rules at [<String>] Level.
83:136 Operation Window added.
83:137 Operation Window modified.
83:138 Operation Window deleted.
83:139 FTP Site changed from [<String>] to [<String>].
83:140 User Name for FTP Site changed from [<String>] to [<String>].
83:141 Password for FTP Site changed.
83:142 Whether to use HTTP proxy changed from [<Number>] to [<Number>].
83:143 HTTP Proxy server was set from [<String>:<Number>] to [<String>:<Number>].
83:144 HTTP Proxy username was set from [<String>] to [<String>].
83:145 HTTP Proxy password was changed.
83:146 CommServe Update Location changed from [<String>] to [<String>].
83:147 User Name for CommServe Update Location changed from [<String>] to [<String>].
83:148 Password for CommServe Update Location Changed.
83:149 UNIX Update Location changed from [<String>] to [<String>].
83:150 User Name for UNIX Update Location changed from [<String>] to [<String>].
83:151 UNIX Client for UNIX Update Location changed from [<Number>] to [<Number>].
83:152 UNIX Download changed from [<String>] to [<String>].
83:153 Snap Volume Unit [<String>] added.
83:154 Snap Volume Unit [<String>] name changed to [<String>].
83:155 Snap Volume Unit [<String>] modified.
83:156 Snap Volume Unit [<String>] deleted.
83:157 Workflow [<String>] added for Snap Volume Unit [<String>].
83:158 Workflow [<String>] name changed to [<String>].
83:159 Workflow [<String>] modified in Snap Volume Unit [<String>].
83:160 Workflow [<String>] deleted.
83:161 Subclient Policy Name is [<String>], changed from [<String>].
83:162 Filer User Name changed from [<String>] to [<String>].
83:163 Site Account User changed from [<String>] to [<String>].
83:164 Filer User Password changed.
83:165 Site Account User Password changed.
83:166 Windows Account with SQL Admin Role was changed from [<String>] to [<String>].
83:167 Password for Windows Account with SQL Admin Role was changed.
83:168 Added Job Controller Filter [<String>] for User [<String>].
83:169 Modified Job Controller Filter [<String>] for User [<String>].
83:170 Deleted Job Controller Filter [<String>] for User [<String>].
83:171 Calendar [<String>] deleted.
83:172 Calendar [<String>] added.
83:173 Calendar [<String>] modified.
83:174 Changed name of Calendar from [<String>] to [<String>].
83:175 Changed to default calendar
83:176 Changed start date.
83:177 Client [<String>] Domain name changed from [<String>] to [<String>].
83:178 Client [<String>] CommServe host name changed from [<String>] to [<String>].
83:179 [<String>]
83:180 [\n<String>\n]
83:181 Default Undo File Path was changed from [<String>] to [<String>].
83:182 Windows Account with SQL Admin Role was changed from [<String>] to [<String>].
83:183 Password for Windows Account with SQL Admin Role was changed.
83:184 User Name for Pre/Post Commands changed from [<String>] to [<String>].
83:185 User Impersonation for Pre/Post Commands enabled.
83:186 User Impersonation for Pre/Post Commands disabled.
83:187 Password for Pre/Post Commands Changed.
83:188 Time Zone for operational window and this application has changed from [<String>] to [<String>].
83:189 Windows Account with SQL Admin Role was changed from [<String>] to [<String>].
83:190 Password for Windows Account with SQL Admin Role was changed.
83:191 Content Indexing [<String>].
83:192 Description changed from [<String>] to [<String>].
83:193 Resource Filename changed from [<String>] to [<String>].
83:194 Client Job priority changed from [<Number>] to [<Number>].
83:195 Store Updates Locally is changed from [<String>] to [<String>].
83:196 [<String>] has been changed to [<String>].
83:197 Proxy Client For Content Search is [<String>], changed from [<String>].
83:198 Prune job results when disk capacity percentage reaches [<Number>] percent, changed from [<Number>] percent.
83:199 Prune job results after [<Number>] days, changed from [<Number>] days.
83:200 Default Network Interface changed from [<String>] to [<String>].
83:201 Client alternate cache partition changed from [<String>] to [<String>].
83:202 ContinuousDataReplicator Log file Location changed from [<String>] to [<String>].
83:203 client host name changed from [<String>] to [<String>].
83:204 client name changed from [<String>] to [<String>].
83:205 client CommServe host name changed from [<String>] to [<String>].
83:206 Time Zone for operational window and this application has changed from [<String>] to [<String>].
83:207 User Name for Pre/Post Commands changed from [<String>] to [<String>].
83:208 User Impersonation for Pre/Post Commands changed from [<String>] to [<String>].
83:209 Password for Pre/Post Commands Changed.
83:210 Priority for this Application changed from [<Number>] to [<Number>].
83:211 Maximum Simultaneous Stub Recoveries for this Application changed from [<Number>] to [<String>].
83:212 Maximum Simultaneous Stub Recoveries for this Application changed from [<String>] to [<Number>].
83:213 Maximum Simultaneous Stub Recoveries for this Application changed from [<Number>] to [<Number>].
83:214 Throttle when Destination Volume Space changed from [<Number>] to [<Number>].
83:215 Stop when Destination Volume Space changed from [<Number>] to [<Number>].
83:216 Abort when Source Volume Space changed from [<Number>] to [<Number>].
83:217 OS Priority for New Replications changed from [<Number>] to [<Number>].
83:218 Logfile No I/O Flush minutes changed from [<Number>] to [<Number>].
83:219 Pipeline throttle value changed from [<Number>] to [<Number>].
83:220 Bandwidth Throttling Windows changed.
83:221 Meta Data Location changed from [<String>] to [<String>].
83:222 Data Classification has been [<String>].
83:223 Data Classification OS Priority changed from [<Number>] to [<Number>].
83:224 Data Classification CommServe Update Interval changed from [<Number>] to [<Number>].
83:225 Data Classification Inactivity Timeout changed from [<Number>] to [<Number>].
83:226 AD User name changed from [<String>] to [<String>].
83:227 File Archiver User Password Changed.
83:228 Time Between Recalls for this Application changed from [<Number>] to [<Number>].
83:229 Auto Discovery has been [<String>].
83:230 Filer User Name changed from [<String>] to [<String>].
83:231 Site Account User changed from [<String>] to [<String>].
83:232 Filer User Password changed.
83:233 Site Account User Password changed.
83:234 Filer Name changed from [<String>] to [<String>].
83:235 Server name changed from [<String>] to [<String>].
83:236 Stubs Location changed from [<String>] to [<String>].
83:237 Force Lock Release changed to [<String>].
83:238 Index Backup/Restore Path changed from [<String>] to [<String>].
83:239 SQL Database Hosted Remotely changed to [<String>].
83:240 Profile changed from [<String>] to [<String>].
83:241 Mailbox name changed from [<String>] to [<String>].
83:242 Backup Deleted Item Retention changed from [<Number>] to [<Number>].
83:243 Journal Mailbox Threshold changed from [<Number>] to [<Number>].
83:244 Backup Hidden Mailbox changed from [<Number>] to [<Number>].
83:245 Snapshot Writer changed from [<Number>] to [<Number>].
83:246 Backup Set Level changed from [<Number>] to [<Number>].
83:247 Create new index on full is <String> set.
83:248 Create new index on Fail is <String> set.
83:249 User name changed from [<String>] to [<String>].
83:250 Restore in Progress Message for Disk Library Exchange Archiver changed from [<String>] to [<String>].
83:251 Restore in Progress Message for Tape Library Exchange Archiver changed from [<String>] to [<String>].
83:252 Restore in Progress for Offline Media Message for Exchange Archiver changed from [<String>] to [<String>].
83:253 Force Recalls Outlook Add-In user changed from [<Number>] to [<Number>].
83:254 Force Recalls OWA user changed from [<Number>] to [<Number>].
83:255 Proxy File Expiration changed from [<Number>] to [<Number>].
83:256 Proxy Prune Interval changed from [<Number>] to [<Number>].
83:257 Network File Share Archiver for EMC has been <String>
83:258 AD Server Name changed from [<String>] to [<String>].
83:259 AD User name changed from [<String>] to [<String>].
83:260 AD User Password Changed.
83:261 Data Classification Tags changed.
83:262 Snap Engine Type changed from [<String>] to [<String>].
83:263 AD Server List changed.
83:264 QSnap Maximum Cache size for this application has changed from [<Number>] to [<Number>].
83:265 QSnap Minimum Cache size for this application has changed from [<Number>] to [<Number>].
83:266 Online Context Indexing Location ShareName changed.
83:267 User Name for Job Results Directory changed from [<String>] to [<String>].
83:268 Password for Job Results Directory Changed.
83:269 Job Results Path changed from [<String>] to [<String>].
83:270 [<String>] on this Subclient has been [<String>]
83:271 Storage Policy changed.
83:272 PreCommand changed.
83:273 PostCommand changed.
83:274 MediaAgent successfully deleted.
83:275 iDataAgent successfully deleted.
83:276 Client successfully deleted.
83:277 Attempt to run emergency uninstall denied.\n<String>
83:278 User [<String>], Forced Deconfigure for [<String>] failed.\n<String>
83:279 User [<String>], Reconfigure for [<String>] failed.\n<String>
83:280 Attempt to modify <String> denied.\n<String>
83:281 Attempt to delete <String> denied.\n<String>
83:282 Unauthorized attempt to modify properties at pair Level.\n<String>
83:283 Unauthorized attempt to modify properties at replication set Level.\n<String>
83:284 Unauthorized attempt to modify properties at subclient Level.\n<String>
83:285 Unauthorized attempt to create/modify subclient.\n<String>
83:286 Client Encryption Setting is [<String>], changed from [<String>].
83:287 Throttling Parameter changed from [<Number>] to [<Number>]
83:288 FTP Operation Type changed from [<String>] to [<String>].
83:289 FTP Use Passive FTP Option changed from [<String>] to [<String>].
83:290 FTP Proxy Use Passive FTP Changed From [<String>] to [<String>].
83:291 FTP Proxy server was set from [<String>:<Number>] to [<String>:<Number>].
83:292 FTP Proxy username was set from [<String>] to [<String>].
83:293 FTP Proxy password was changed.
83:294 FTP Proxy Location was set from [<String>] to [<String>].
83:295 SQL authentication mode set to [<String>].
83:296 SQL authentication username changed from [<String>] to [<String>].
83:297 SQL authentication password changed.
83:298 Override SQL authentication at higher level had been [%s].
83:299 Update Cache Agent ID changed from [<Number>] to [<Number>].
83:300 FPolicy is now enabled for this Instance.
83:301 FPolicy is now disabled for this Instance.
83:302 Time between recalls changed from [<Number>] to [<Number>] seconds.
83:303 Time to wait after maximum successive recall limit is reached changed from [<Number>] to [<Number>] seconds.
83:304 Maximum Simultaneous Stub Recoveries changed from [<Number>] to [<Number>].
83:305 Windows authentication
83:306 Username and password authentication
83:307 Virtual Center
83:308 ESX Server
83:309 Virtual Server
83:310 Unknown Server Type
83:311 Instance type for Virtual Server changed from [<String>] to [<String>].
83:312 Virtual Server Username now set as [<String>].
83:313 Virtual Server Password has been changed.
83:314 ESX Auto Discovery has been enabled.
83:315 ESX Auto Discovery has been disabled.
83:316 Auto Discover Set to ESX Affinity.
83:317 Auto Discover Set to Wildcard Affinity.
83:318 Auto Discover Set to Unknown Affinity [<Number>].
83:319 Content of ESX Subclients changed for this Backup Set.
83:320 Wildcards used in Auto Discovery of VM-s as Subclient content changed.
83:321 Content of Virtual Guest Hosts Changed for this Backup Set.
83:322 Backup View has changed from [<String>] to [<String>].
83:323 File View
83:324 Volume View
83:325 Disk View
83:326 Unauthorized attempt to Enable/Disable [<String>] for this application on this client.\n\n [<String>]
83:327 [<String>] for this application on this client has been enabled.\n
83:328 Group(s) [<String>] is/are now associated with this <String>.\n \t
83:329 Group(s) [<String>] is/are no longer associated with this <String>.\n \t
83:330 [<String>] for this application on this client has been disabled.\n
83:331 Unauthorized attempt to Enable/Disable [<String>] at Client Level.\n\n%s\n
83:332 Cannot fetch old group affiliation data. Assuming groups may have been deleted.\n
83:333 Unauthorized attempt to modify group associations.\n\n [<String>]
83:334 Unauthorized attempt to create Replication Set from Policy.
83:335 Subclient : [<String>] \tOld Storage Policy Name : [<String>] \tNew Storage Policy Name : [<String>]
83:336 Minimum file size for Hash computation changed from [<Number>] to [<Number>].
83:337 Hash Block Size changed from [<Number>] to [<Number>].
83:338 Exchange Mining Tool Path changed from [<String>] to [<String>].
83:339 Snap Backups [<String>].
83:340 Unauthorized attempt to create Backup Set for OSSV Backup to Tape.
83:341 Context Indexing OWA URL changed.
83:342 Association changed for group [<String>].\n
83:343 Group is now associated to these entities.\n
83:344 \tCommServe : [<String>]\n
83:345 \tClient(s): [<String>]\n
83:346 \tMediaAgent(s): [<String>]\n
83:347 \tLibraries : [<String>]\n
83:348 \tClient group(s): [<String>]\n
83:349 \tStorage policies : [<String>]\n
83:350 Password check on login to the CommServe has been [<String>].
83:351 Collect Delegate Info has been [<String>].
83:352 Do Not De-duplicate Email [<String>].
83:353 Attempt to delete user [<String>] was denied.\n\n
83:354 Attempt to add a new user was denied.\n\n
83:355 Attempt to modify properties for user [<String>] was denied.\n\n
83:356 User does not have permission to delete self.\n\n
83:357 User attempted to modify group associations for which he/she does not have permission.\n\n
83:358 User cannot modify his/her own login name.\n\n
83:359 User cannot modify his/her own password aging criteria.\n\n
83:360 <String> [<String>] has been added. \n
83:361 <String> [<String>] has been deleted. \n
83:362 <String> [<String>] has been updated. \n
83:363 Description has been changed.
83:364 Full name was changed from [<String>] to [<String>].
83:365 Login name was changed from [<String>] to [<String>].
83:366 Password was changed.
83:367 Email Address was changed from [<String>] to [<String>].
83:368 Pager Address was changed from [<String>] to [<String>].
83:369 User has been <String>.
83:370 Password expiration date has been changed.
83:371 The user is no longer a member of <String> <String>.
83:372 The user is now a member of <String> <String>.
83:373 Group [<String>] changes: \n\n
83:374 Group has been <String>.
83:375 \"All capabilities\" has been <String>.
83:376 \"All Associations\" has been <String>.
83:377 \"Self Association\" has been <String>.
83:378 Group name has been changed from [<String>] to [<String>].
83:379 Group has been deleted.
83:380 User
83:381 Users
83:382 Group
83:383 Groups
83:384 Capability
83:385 Capabilities
83:386 has
83:387 have
83:388 selected
83:389 deselected
83:390 add
83:391 delete
83:392 modify
83:393 <String> <String> <String> been deleted from the group.
83:394 <String> <String> <String> been added to the group.
83:395 Unauthorized attempt to Enable/Disable <String> on this CommCell.\n\n<String>
83:396 Unauthorized attempt to Enable/Disable <String> on this client.\n\n<String>
83:397 Unauthorized attempt to Enable/Disable <String> on client group [^2%%s].\n\n<String>
83:398 <String> on client group [<String>] has been <String>.
83:399 <String> on this client has been <String>.
83:400 Scratch Pool [<String>] added to Library.\n
83:401 Added Mount Path [<String>]\n
83:402 Deleted Mount Path [<String>]\n
83:403 Deleted Deconfigured Library [<String>]\n
83:404 Unlimited
83:405 Store Updates Locally
83:406 Get Updates From Share
83:407 Engage Active Directory VSS writer [<String>]
83:408 Disk Keep Snaps now Enabled
83:409 Disk Keep Snaps now Disabled
83:410 Setting SRM subclient content
83:411 Setting SRM agent credentials
83:412 No Snapshot for Discrete Replication [<String>].\n
83:413 Auto Discovery of SQL instances Enabled.
83:414 Auto Discovery of SQL instances Disabled.
83:415 End user erase Enabled.
83:416 End user erase Disabled.
83:417 Use alternate URL for IIS Server Enabled.
83:418 Use alternate URL for IIS Server Disabled.
83:419 Alternate IIS Server Name changed from [<String>] to [<String>].
83:420 Run Post-Recovery Point command enabled.
83:421 Run Post-Recovery Point command disabled.
83:422 Description modified.
83:423 Unauthorized attempt to update network settings for client.
83:424 \nWindows Global Filters : [<String>].
83:425 \nUnix Global Filters : [<String>].
83:426 \nNetware Global Filters :[<String>].
83:427 \nExchange Mailbox Global Filters : [<String>].
83:428 \nOnline Content Indexing for Exchange Global Filters : [<String>].
83:429 \nExchange Compliance Archiver Filters : [<String>].
83:430 \nExchange Mailbox Archiver Global Filters : [<String>].
83:431 \nWindows File Archiver Global Filters : [<String>].
83:432 \nVirtual Server Global Filters : [<String>].
83:433 Use Global filters on All Subclients Selected.\n
83:434 Use Global filters on All Subclients Deselected.\n
83:435 Use QNet Global Filters Selected.\n
83:436 Use QNet Global Filters Deselected.\n
83:437 Storage Policy changed for Subclients [%s].\n
83:438 Storage Policy changed for Instances [%s].\n
83:439 Data Management
83:440 Desktop GUI configuration modified.
83:441 Instance Name changed from [<String>] to [<String>].
83:442 \nWorkstation Backup Agent Global Filters : [<String>].
83:443 Virtual Center hostname now set to [<String>].
83:444 Handle Unassociated Guest Hosts has been enabled.
83:445 Handle Unassociated Guest Hosts has been disabled.
83:446 Proxy File System Client is [<String>], changed from [<String>].
83:447 Rule-based Discovery has been enabled.
83:448 Rule-based Discovery has been disabled.
83:449 Update Cache Agent changed from [<String>] to [<String>].
83:450 Collect Delegate Information Enabled.
83:451 Collect Delegate Information Disabled.
83:452 Do not Single Instance Email Messages Enabled.
83:453 Do not Single Instance Email Messages Disabled.
83:454 URL for Compliance Search changed from [<String>] to [<String>].
83:455 URL for End-User Search changed from [<String>] to [<String>].
83:456 URL for Administrator changed from [<String>] to [<String>].
83:457 Check Archive Bit during backup is Enabled.
83:458 Check Archive Bit during backup is Disabled.
83:459 Backup set Marked as My Backup set.
83:460 Backup set is not My Backup set anymore.
83:461 Preserve File access time Enabled.
83:462 Preserve File access time Disabled.
83:463 Use Change Journal Enabled.
83:464 Use Change Journal Disabled.
83:465 Use Data Classification for Backup Enabled.
83:466 Use Data Classification for Backup Disabled.
83:467 Auto Discovery Enabled.
83:468 Auto Discovery Disabled.
83:469 Decompress Data before Backup Enabled.
83:470 Decompress Data before Backup Disabled.
83:471 Catalog Partition number changed from [<Number>] to [<Number>].
83:472 SQL connect User Name changed from [<String>] to [<String>].
83:473 SQL connect Password changed.
83:474 Use SQL Connect Enabled.
83:475 Use SQL Connect Disabled.
83:476 Backup set Name changed from [<String>] to [<String>].
83:477 Backup set has been marked as the default backup set.
83:478 Use Storage Group Affinity for Mailbox discovery enabled.
83:479 Use Storage Group Affinity for Mailbox discovery disabled.
83:480 Use Active Directory Group Affinity for Mailbox discovery enabled.
83:481 Use Active Directory Group Affinity for Mailbox discovery disabled.
83:482 Use Wild Card for Mailbox discovery enabled.
83:483 Use Wild Card for Mailbox discovery disabled.
83:484 Default Index Storage Policy changed from [<String>] to [<String>].
83:485 Snapshot Maximum Cache size changed from [<Number>] to [<Number>].
83:486 Create index on Full enabled.
83:487 Create index on Full disabled.
83:488 Create index when job fails Enabled.
83:489 Create index when job fails Disabled.
83:490 Centera Resource File Name changed from [<String>] to [<String>].
83:491 Centera Client Name changed from [<String>] to [<String>].
83:492 Continue from replica after Failover Enabled.
83:493 Continue from replica after Failover Disabled.
83:494 Content Indexing enabled.
83:495 Content Indexing disabled.
83:496 Snap Backup enabled.
83:497 Snap Backup disabled.
83:498 Client is now associated with client groups [<String>].
83:499 Client is no longer associated with client groups [<String>].
83:500 %s Enabled.
83:501 VDI timeout was changed from [<Number>] to [<Number>].
83:502 Override Global settings for Authentication Enabled
83:503 Override Global settings for Authentication Disabled
83:504 SQL Version changed from [<String>] to [<String>]
83:505 Use VSS enabled
83:506 Use VSS disabled
83:507 Log Storage policy changed to [<String>]
83:508 Default View Names Added [<String>]
83:509 Profile Document Names Added [<String>]
83:510 Network File Share Archiver for EMC has been Enabled
83:511 Network File Share Archiver for EMC has been Disabled
83:512 Filer Name changed from [<String>] to [<String>]
83:513 Filer User Name changed from [<String>] to [<String>]
83:514 Password changed.
83:515 Informix User is [<String>].
83:516 Informix Command Policy changed.
83:517 Informix Log Policy changed.
83:518 Informix On-Config File changed from [<String>] to [<String>].
83:519 Informix Dir changed from [<String>] to [<String>].
83:520 Version changed from [<String>] to [<String>].
83:521 Encryption setting changed.
83:522 SAP data home changed from [<String>] to [<String>].
83:523 Number of Log Backup Streams changed from [<Number>] to [<Number>].
83:524 Override Data Paths for command line storage policy Enabled.
83:525 Override Data Paths for command line storage policy Disabled.
83:526 Override Data Paths for log storage policy Enabled.
83:527 Override Data Paths for log storage policy Disabled.
83:528 Data Paths for command line storage policy changed.
83:529 Data Paths for log storage policy changed.
83:530 SAP Exe Folder changed from [<String>] to [<String>].
83:531 SAP Library location changed from [<String>] to [<String>].
83:532 SBT Library Name changed from [<String>] to [<String>].
83:533 Oracle Home changed from [<String>] to [<String>].
83:534 SAP Exe Folder changed from [<String>] to [<String>].
83:535 Use Catalog Connect enabled.
83:536 Use Catalog Connect disabled.
83:537 Catalog Connect username changed from [<String>] to [<String>].
83:538 Catalog Connect Password Changed.
83:539 Catalog Connect SID changed from [<String>] to [<String>].
83:540 SQL Connect username changed from [<String>] to [<String>].
83:541 SQL Connect Password Changed.
83:542 SQL Connect SID changed from [<String>] to [<String>].
83:543 TNS Admin path changed from [<String>] to [<String>].
83:544 Startup Pfile changed from [<String>] to [<String>].
83:545 Oracle Proxy copy changed from [<String>] to [<String>].
83:546 Delete Expired enabled.
83:547 Delete Expired disabled.
83:548 Auto Backup Control File enabled.
83:549 Auto Backup Control File disabled.
83:550 Oracle Database Role changed from [<String>] to [<String>].
83:551 Block size changed from [<Number>] to [<Number>].
83:552 Oracle user changed from [<Number>] to [<Number>].
83:553 Oracle host password changed
83:554 Use source on missing proxy enabled
83:555 Use source on missing proxy disabled
83:556 Proxy for snap backup changed from [<String>] to [<String>]
83:557 Snapshot Engine changed
83:558 Snap backup enabled
83:559 Snap backup disabled
83:560 Data path 1 changed to [<String>] from [<String>]
83:561 Data path 2 changed to [<String>] from [<String>]
83:562 Data path 3 changed to [<String>] from [<String>]
83:563 Data path 4 changed to [<String>] from [<String>]
83:564 Data path 5 changed to [<String>] from [<String>]
83:565 Single instancing enabled
83:566 Single instancing disabled
83:567 RMAN cross check disabled
83:568 RMAN cross check enabled
83:569 Auto Detect new and deleted Partitions Enabled
83:570 Auto Detect new and deleted Partitions Disabled
83:571 Word width changed from [<Number>] to [<Number>]
83:572 SA user name changed from [<String>] to [<String>]
83:573 SA password changed
83:574 Sybase Home changed from [<String>] to [<String>].
83:575 Sybase ASE changed from [<String>] to [<String>].
83:576 Sybase OCS changed from [<String>] to [<String>].
83:577 Sybase Configuration file path changed from [<String>] to [<String>].
83:578 Sybase shared memory directory changed from [<String>] to [<String>].
83:579 Sybase OCS changed from [<String>] to [<String>].
83:580 Sybase backup server changed from [<String>] to [<String>].
83:581 MySQL Home changed from [<String>] to [<String>].
83:582 MySQL Version changed from [<String>] to [<String>].
83:583 MySQL binary file path changed from [<String>] to [<String>].
83:584 MySQL Configuration file path changed from [<String>] to [<String>].
83:585 MySQL data file path changed from [<String>] to [<String>].
83:586 MySQL Archive Log index file path changed from [<String>] to [<String>].
83:587 MySQL Socket file changed from [<String>] to [<String>].
83:588 Data Storage policy changed from [<String>] to [<String>].
83:589 Log Storage policy changed from [<String>] to [<String>].
83:590 Command Line Storage policy changed from [<String>] to [<String>].
83:591 Host user name changed from [<String>] to [<String>].
83:592 Host password changed
83:593 Host user domain name changed from [<String>] to [<String>].
83:594 Storage policy changed from [<String>] to [<String>].
83:595 Create Snap Command changed from [<String>] to [<String>].
83:596 Generic recovery script changed from [<String>] to [<String>].
83:597 Default Import host changed from [<String>] to [<String>].
83:598 Delete Snap Command changed from [<String>] to [<String>].
83:599 Snap username changed from [<String>] to [<String>].
83:600 Number of streams changed from [<Number>] to [<Number>].
83:601 Number of streams for data backup changed from [<Number>] to [<Number>].
83:602 Number of streams for log backup changed from [<Number>] to [<Number>].
83:603 PreScan process changed from [<Number>] to [<Number>].
83:604 PostScan process changed from [<Number>] to [<Number>].
83:605 PreBackup process changed from [<Number>] to [<Number>].
83:606 PostBackup process changed from [<Number>] to [<Number>].
83:607 PreSnap process changed from [<Number>] to [<Number>].
83:608 PostSnap process changed from [<Number>] to [<Number>].
83:609 Subclient name changed from [<Number>] to [<Number>].
83:610 Subclient Backup level changed from [<Number>] to [<Number>].
83:611 Subclient was marked default.
83:612 System state backup disabled on this subclient.
83:613 System state backup enabled on this subclient.
83:614 Exclude Quota trees disabled on this subclient.
83:615 Exclude Quota trees enabled on this subclient.
83:616 Oracle backup device changed from [<String>] to [<String>].
83:617 Oracle backup device changed from [<String>] to [<String>].
83:618 Backup Archive log enabled
83:619 Backup Archive log disabled
83:620 Number of Archive files per bfs changed from [<Number>] to [<Number>]
83:621 Delete Archive log enabled
83:622 Delete Archive log disabled
83:623 Resync catalog enabled
83:624 Resync catalog disabled
83:625 Use startup file enabled
83:626 Use startup file disabled
83:627 Startup Pfile changed from [<String>] to [<String>]
83:628 Light out script enabled
83:629 Light out script disabled
83:630 Backup control files enabled
83:631 Backup control files disabled
83:632 Backup SP files enabled
83:633 Backup SP files disabled
83:634 Validate backup enabled
83:635 Validate backup disabled
83:636 Protect backup recovery area enabled
83:637 Protect backup recovery area disabled
83:638 Maximum number of open files changed from [<Number>] to [<Number>]
83:639 Maximum backup set size changed from [<Number>] to [<Number>]
83:640 Light out script Maximum delay time changed from [<Number>] to [<Number>]
83:641 Light out script Maximum sleep time(minutes) changed from [<Number>] to [<Number>]
83:642 Light out script Maximum sleep time(seconds) changed from [<Number>] to [<Number>]
83:643 Light out script Maximum retries changed from [<Number>] to [<Number>]
83:644 Light out script backup warning changed from [<Number>] to [<Number>]
83:645 Light out script Maximum retries changed from [<Number>] to [<Number>]
83:646 Backup level changed from [<Number>] to [<Number>]
83:647 Cumulative : yes
83:648 Cumulative : no
83:649 Oracle Tag changed from [<String>] to [<String>]
83:650 Get Data FPS enabled
83:651 Get Data FPS disabled
83:652 Skip Read-only enabled
83:653 Skip Read-only disabled
83:654 Oracle Tag changed from [<String>] to [<String>]
83:655 Skip offline items Enabled
83:656 Skip offline items Disabled
83:657 Skip items in access Enabled
83:658 Skip items in access Disabled
83:659 Table browse Enabled
83:660 Table browse Disabled
83:661 Backup Office Communication Server Enabled
83:662 Backup Office Communication Server Disabled
83:663 OCS username changed from [<String>] to [<String>]
83:664 OCS password changed
83:665 Use Global Filter changed from [<String>] to [<String>]
83:666 Backup Mode changed from [<String>] to [<String>]
83:667 Backfill cutoff date changed
83:668 Single Instance Enabled
83:669 Single Instance Disabled
83:670 Proxy port number changed from [<String>] to [<String>].
83:671 Proxy Address changed from [<String>] to [<String>].
83:672 Proxy Path changed from [<String>] to [<String>]
83:673 Proxy Enabled
83:674 Proxy Disabled
83:675 Check Last Event time changed.
83:676 Check Last Event Enabled
83:677 Check Last Event Disabled
83:678 Number of buffers changed from [<Number>] to [<Number>].
83:679 Backup buffer size changed from [<Number>] to [<Number>].
83:680 Backup logs only Enabled
83:681 Backup logs only Disabled
83:682 Backup data Enabled
83:683 Backup data Disabled
83:684 Backup type changed
83:685 Data stream threshold changed from [<Number>] to [<Number>].
83:686 Do not single instance e-mail Enabled.
83:687 Do not single instance e-mail Disabled.
83:688 Snap failure action changed from [<String>] to [<String>].
83:689 Search Engine changed from [<String>] to [<String>].
83:690 Change Deduplication Setting
83:691 Document type changed from [<String>] to [<String>].
83:692 Site group changed from [<String>] to [<String>].
83:693 Owner changed from [<String>] to [<String>].
83:694 Number of Versions changed from [<Number>] to [<Number>].
83:695 Content Indexing word count changed from [<Number>] to [<Number>].
83:696 Incremental level changed from [<Number>] to [<Number>].
83:697 Backup IXBAR boot file enabled.
83:698 Backup IXBAR boot file disabled.
83:699 Pre/Post username changed from [<String>] to [<String>].
83:700 Username for UNC path changed from [<String>] to [<String>].
83:701 UNC path user password changed
83:702 Use pre post user Enabled
83:703 Use pre post user Disabled
83:704 Pre/Post user password changed
83:705 Filer user Password changed.
83:706 Begin scan for file selection for free volume changed from [<Number>] to [<Number>] percentage.
83:707 End scan if volume if freed to changed from [<Number>] to [<Number>] percentage.
83:708 Low mailbox size watermark changed from [<Number>] to [<Number>] percentage.
83:709 High mailbox size watermark changed from [<Number>] to [<Number>] percentage.
83:710 Archive files access time is changed from [<Number>] to [<Number>] days.
83:711 Archive files modified time is changed from [<Number>] to [<Number>] days.
83:712 Archive files with block size changed from [<Number>] to [<Number>] KB.
83:713 Stub retention time changed from [<String>] to [<String>].
83:714 PST file location changed from [<String>] to [<String>].
83:715 PST file username changed from [<String>] to [<String>].
83:716 PST file user password changed
83:717 Create index interval changed from [<Number>] to [<Number>]
83:718 Hot spot enabled
83:719 Hot spot disabled
83:720 Use SQL connect enabled
83:721 Use SQL connect disabled
83:722 Use subclient policy filters enabled
83:723 Use subclient policy filters disabled
83:724 Allow multiple streams within drive or mount point Enabled
83:725 Allow multiple streams within drive or mount point Disabled
83:726 Failover to storage policy data paths for full backup Enabled
83:727 Failover to storage policy data paths for full backup Disabled
83:728 Failover to storage policy data paths for non-full backup Enabled
83:729 Failover to storage policy data paths for non-full backup Disabled
83:730 Apple double support enabled.
83:731 Apple double support disabled.
83:732 Use SharePoint alternate access enabled.
83:733 Use SharePoint alternate access disabled.
83:734 Do not allow incremental backup Enabled.
83:735 Do not allow incremental backup Disabled.
83:736 Delete Archived Messages enabled.
83:737 Delete Archived Messages disabled.
83:738 Use disk space watermarks Enabled
83:739 Use disk space watermarks Disabled
83:740 Use mailbox size watermarks Enabled
83:741 Use mailbox size watermarks Disabled
83:742 Do not migrate unread messages Enabled
83:743 Do not migrate unread messages Disabled
83:744 Leave body with stub enabled
83:745 Leave body with stub disabled
83:746 Local host backup Enabled
83:747 Local host backup Disabled
83:748 Collect user identity Enabled
83:749 Collect user identity Disabled
83:750 Use VSS enabled
83:751 Use VSS disabled
83:752 Use VSS for system state enabled
83:753 Use VSS for system state disabled
83:754 Use Qsnap enabled
83:755 Use Qsnap disabled
83:756 Ignore Archive log destination Enabled
83:757 Ignore Archive log destination Disabled
83:758 Subclient marked as Selective Online Full.
83:759 Subclient is not Selective Online Full anymore.
83:760 Software Compression changed from [<String>] to [<String>].
83:761 Software Compression on MediaAgent
83:762 Software Compression Off
83:763 Throttle network bandwidth changed from [<Number>] to [<String>]
83:764 Number of network agents from [<Number>] to [<String>]
83:765 Software Encryption changed from [<String>] to [<String>]
83:766 None
83:767 On Network Only
83:768 On Media Only
83:769 On Network and Media
83:770 Deduplication changed from [<String>] to [<String>]
83:771 On Client
83:772 On MediaAgent
83:773 No Deduplication
83:774 Content removed : [<String>]
83:775 Content added : [<String>]
83:776 Content changed from [<String>] to [<String>]
83:777 Use backup conversion rules enabled
83:778 Use backup conversion rules disabled
83:779 Preserve Stubs until media has been pruned
83:780 Prune stubs for given days
83:781 Archive files only, do not create stubs.
83:782 Prune stubs after [<Number>] days
83:783 Proxy for Exchange changed from [<String>] to [<String>]
83:784 Network Error Retry Option Enabled
83:785 Network Error Retry Option Disabled
83:786 Backup Type changed from [<String>] to [<String>].
83:787 Use VSS Enabled
83:788 Use VSS Disabled
83:789 End user erase folder list changed from [<String>] to [<String>]
83:790 Fail the job
83:791 Continue and reset access time
83:792 Continue and do not reset access time
83:793 On
83:794 Off
83:795 Use Cell level policy
83:796 Online
83:797 Offline
83:798 Online Subset
83:799 Archive according to Archiving Rules
83:800 Operate as Backup Agent
83:801 Operate as Backfill
83:802 Context Indexing OWA URL changed from [<String>] to [<String>]
83:803 Online Context Indexing Location Share Name changed from [<String>] to [<String>]
83:804 Generate Activity Log Enabled
83:805 Generate Activity Log Disabled
83:806 Log location from [<String>] to [%2%s]
83:807 Change Journal User changed from [<String>] to [<String>]
83:808 Change Journal User password changed
83:809 Use local System Account for Authentication Enabled
83:810 Use local System Account for Authentication Disabled
83:811 \nContent Indexing Global Filters : [<String>].
83:812 Oracle Backup disable switch is set to true
83:813 Oracle Backup disable switch is set to false
83:814 Backup type has changed from [<String>] to [<String>]
83:815 Use Journaling for Discrete Replication [<String>]\n
83:816 PostgreSQL
83:817 [<Message>] Port changed from [<String>] to [<String>]
83:818 [<Message>] Binary Directory path changed from [<String>] to [<String>]
83:819 [<Message>] Configuration file path changed from [<String>] to [<String>]
83:820 [<Message>] Data Directory changed from [<String>] to [<String>]
83:821 [<Message>] Archive Log Directory changed from [<String>] to [<String>]
83:822 [<Message>] Socket file changed from [<String>] to [<String>]
83:823 SybaseIQ
83:824 [<Message>] Home changed from [<String>] to [<String>]
83:825 [<Message>] ASE changed from [<String>] to [<String>]
83:826 [<Message>] Sybase OCS changed from [<String>] to [<String>]
83:827 [<Message>] server changed from [<String>] to [<String>]
83:828 [<Message>] catalog database space path changed from [<String>] to [<String>]
83:829 [<Message>] main store path changed from [<String>] to [<String>]
83:830 [<Message>] Catalog dump path Changed from [<String>] to [<String>]
83:831 Net application Image File backup changed from [<String>] to [<String>]
83:832 Xen Server
83:833 Xen Center
83:834 Allow multiple streams within drive or mount point Enabled for Snap Backup
83:835 Allow multiple streams within drive or mount point Disabled for Snap Backup
83:836 Number of streams changed for Snap Backup from [<Number>] to [<Number>]
83:837 Auto Discover Set to Resource Pool Affinity.
83:838 Auto Discover Set to Data Store Affinity.
83:839 Follow Symbolic link enabled.
83:840 Follow Symbolic link disabled.
83:841 Restore to Recovered Items folder enabled.
83:842 Restore to Recovered Items folder disabled.
83:843 Copy Backup enabled.
83:844 Copy Backup disabled.
83:845 Online Content Indexing enabled.
83:846 Online Content Indexing disabled.
83:847 Sharepoint Online Content Indexing Web Server changed from [<String>] to [<String>].
83:848 Sharepoint Online Content Indexing username changed from [<String>] to [<String>].
83:849 Sharepoint Online Content Indexing password modified.
83:850 Skip Metafile Creation changed from [<String>] to [<String>].
83:851 Backup Staging directory changed from [<String>] to [<String>]
83:852 Use MSSQL Compression Enabled
83:853 Use MSSQL Compression Disabled
83:854 Use MSSQL Encryption Enabled
83:855 Use MSSQL Encryption Disabled
83:856 Backup staging directory password changed.
83:857 Global Zone Host Name changed from [<String>] to [<String>]
83:858 Enabled WildCard Content for backup set [<String>].
83:859 EDC NBU Instance -
83:860 [<Message>] [<String>] Master Server Name changed from [<String>] to [<String>].
83:861 [<Message>] [<String>] Staging Path changed from [<String>] to [<String>].
83:862 [<String>] User name changed from [<String>] to [<String>].
83:863 [<String>] Password Changed.
83:864 System client Group [<String>] created.
83:865 Client Group - [<String>] deleted.
83:866 EDC Clients [<String>] belonging to client Group - [<String>] are deleted.
83:867 Discover criteria of subclient [<String>] set to discover by client name pattern.
83:868 Discover criteria of subclient [<String>] set to discover by agents.
83:869 Updated the discover criteria.
83:870 Client Group associated changed from [<String>] to [<String>].
83:871 Optimized Data For Search enabled.
83:872 Optimized Data For Search disabled.
83:873 File level Analytics license Enabled for client [<String>]
83:874 File level Analytics license Disabled for client [<String>]
83:875 Agent Enabled for SRM for client [<String>].
83:876 Agent Disabled for SRM for client [<String>].
83:877 NetBIOS Name changed from [<String>] to [<String>].
83:878 SNMP Common Name changed from [<String>] to [<String>].
83:879 UID changed from [<Number>] to [<Number>].
83:880 GID changed from [<Number>] to [<Number>].
83:881 Filer NET Password has been changed.
83:882 Filer NET username changed from [<String>] to [<String>].
83:883 SRM Data Collection has been enabled for this agent.
83:884 SRM Data Collection has been disabled for this agent.
83:885 PST Specific Folder changed from [<String>] to [<String>].
83:886 Web Search Server Changed from [<String>] to [<String>].
83:887 Web Service URL changed from [<String>] to [<String>].
83:888 DAG SubClient[<String>] selection type changed.
83:889 Backup to Active copy Enabled in subclient[<String>].
83:890 Enabled Backup to Passive Copy if Active copy is not available in subclient[<String>].
83:891 Snap Proxy Mount changed from [<String>] to [<String>].
83:892 Include SRM Action Enabled
83:893 Include SRM Action Disabled
83:894 Catalog data full system restore changed to [<String>]
83:895 Create PST Specific folder Enabled.
83:896 Create PST Specific folder Disabled.
83:897 Changed mining client from [<String>] to [<String>] for subclient [<String>].
83:898 Changed mining backup set from [<String>] to [<String>] for subclient [<String>].
83:899 Changed mining subclient from [<String>] to [<String>] for subclient [<String>].
83:900 Changed mining proxy client from [<String>] to [<String>] for subclient [<String>].
83:901 Mining is enabled for subclient [<String>].
83:902 Mining is disabled for subclient [<String>].
83:903 Mine proxy client enabled for subclient [<String>].
83:904 Mine proxy client disabled for subclient [<String>].
83:905 Updated the list of WBA Owners for client[<String>].
83:906 SRM Backup Data Collection has been enabled.
83:907 SRM Backup Data Collection has been disabled.
83:908 SRM Backup Data Collection options have been disabled.
83:909 Use either Age or Size rule enabled.
83:910 Use either Age or Size rule disabled.
83:911 Use Sent or Received time for Age rule enabled.
83:912 Use Sent or Received time for Age rule disabled.
83:913 Disable all rules is enabled.
83:914 Disable all rules is disabled.
83:915 Do not create stub enabled.
83:916 Do not create stub disabled.
83:917 Archive messages with attachment only enabled.
83:918 Archive messages with attachment only disabled.
83:919 Override index cycles enabled.
83:920 Override index cycles disabled.
83:921 Preserve stubs until media has been pruned.
83:922 Manage PST Stubs enabled.
83:923 Manage PST Stubs disabled.
83:924 Manage PST changed from [<String>] to [<String>].
83:925 Copy PST stubs to mailbox.
83:926 Move PST stubs to mailbox.
83:927 Local PST location enabled.
83:928 Local PST location disabled.
83:929 Include attachment filter changed from [<String>] to [<String>].
83:930 Exclude attachment filter changed from [<String>] to [<String>].
83:931 Manual Retention enabled.
83:932 Manual Retention disabled.
83:933 Support Offline Archiving enabled.
83:934 Support Offline Archiving disabled.
83:935 Use file modified time to determine age enabled.
83:936 Use file modified time to determine age disabled.
83:937 File Archive Enabled for File system.
83:938 File Archive Disabled for File system=======
83:939 Changed ESX server name from [<String>] to [<String>] for subclient [<String>].
83:940 Express Recovery wild card for client log backup changed from [<String>] to [<String>].
83:941 Changed Number of minutes between removing catalogued objects from [<Number>] to [<Number>].
83:942 Software Share changed from [<String>] to [<String>].
83:943 [<String>] Storage PolicyId changed from [<Number>] to [<Number>].
83:944 [<String>] Storage Policy Name changed from [<String>] to [<String>].
83:945 Changed mining sqlInstance Name from [<String>] to [<String>] for subclient [<String>].
83:946 Changed mining userPassword from [<String>] to [<String>] for subclient [<String>].
83:947 Changed mining userName from [<String>] to [<String>] for subclient [<String>].
83:948 Generate Data Verification is enabled for subclient [<String>].
83:949 Generate Data Verification is disabled for subclient [<String>].
83:950 EDC NetApp SnapManager for Oracle Instance -
83:951 EDC NetApp SnapManager for SAP/Oracle Instance -
83:952 [<Message>] [<String>] SAP Data Home changed from [<String>] to [<String>].
83:953 [<Message>] [<String>] SAP EXE Location changed from [<String>] to [<String>].
83:954 Catalog Data Full System Restore changed from [<String>] to [<String>].
83:955 Backup system state option is [<String>]\n
83:956 Auto Discover Set to OS Group Affinity
83:957 $Instance has been selected as a Secondary Fpolicy Server.
83:958 $Instance has been de-selected as a Secondary Fpolicy Server.
83:959 Backup Set Deduplication property changed from [<String>] to [<String>].
83:960 [<Message>] Version changed from [<String>] to [<String>].
83:961 Recall link body enabled for subclient [<String>].
83:962 Recall link body disabled for subclient [<String>].
83:963 Changed OWA Server Name from [<String>] to [<String>] for subclient [<String>].
83:964 Use Disable AutoDiscovery option enabled.
83:965 Use Disable AutoDiscovery option disabled.
83:966 Use Disable LogConsistency option enabled.
83:967 Use Disable LogConsistency option disabled.
83:968 Tunable Block size changed from [<Number>] to [<Number>].
83:969 Tunable Buffer Count changed from [<Number>] to [<Number>].
83:970 Archive files with max size changed from [<Number>] to [<Number>] KB.
83:971 Migrate Read Only file Enabled.
83:972 Migrate Read Only file Disabled.
83:973 Transport Mode has changed from [<Number>] to [<Number>] for subclient [<Number>].
83:974 Use SharePoint Direct access enabled.
83:975 Use SharePoint alternate access disabled.
83:976 Oracle Archive second copy enabled.
83:977 Oracle Archive second copy disabled.
83:978 Archive delete enabled at [<Message>] Instance [<String>].
83:979 Archive delete disabled at [<Message>] Instance [<String>].
83:980 Multiplexing for Oracle has been <String>.
83:981 Use HardWare Snapshot.
83:982 Backup of Workstation Deleted files has been [<String>].
83:983 Backup set has been marked as the Fan-In backup set.
83:984 Changed ESX User name from [<String>] to [<String>] for subclient [<String>].
83:985 Changed ESX Password for subclient [<String>].
83:986 Tunable Max Transfer Size changed from [<Number>] to [<Number>].
83:987 Changed ESX Host name from [<String>] to [<String>] for subclient [<String>].
83:988 SMTP username changed from [<String>] to [<String>].
83:989 SMTP displayname changed from [<String>] to [<String>].
83:990 SMTP SSL flag changed.
83:991 SMTP authentication flag changed.
83:992 SMTP password has been changed.
83:993 Exchange version changed from [<String>] to [<String>]
83:994 DB2 backup compression flag has been changed from [<Number>] to [<Number>].
83:995 DB2 backup parallelism value has been changed from [<Number>] to [<Number>].
83:996 mtime is enabled.
83:997 mtime is disabled.
83:998 Changed hash minimum file size changed from [<Number>] to [<Number>].
83:999 Changed hash block size changed from [<Number>] to [<Number>].
83:1000 Changed FLR verification before sync.
83:1001 Changed FLR generate data verification.
83:1002 Prune archive items flag changed.
83:1003 Prune archive items changed from [<Number>] to [<Number>] days.
83:1004 Changed Celerra control station from [<String>] to [<String>].
83:1005 Changed Celerra user name from [<String>] to [<String>].
83:1006 Celerra password changed.
83:1007 ctime is enabled.
83:1008 ctime is disabled.
83:1009 Enable Stubbing is enabled.
83:1010 Enable Stubbing is disabled.
83:1011 Enable LVM/cxbf snapshot to preserve file access time.
83:1012 Disable LVM/cxbf snapshot to preserve file access time.
83:1013 postgresql collect object list enabled.
83:1014 postgresql collect object list disabled.
83:1015 Collect VSS MetaData enabled.
83:1016 Collect VSS MetaData disabled.
83:1017 Truncate SQL Logs enabled.
83:1018 Truncate SQL Logs disabled.
83:1019 Truncate EXDB Logs enabled.
83:1020 Truncate EXDB Logs enabled.
83:1021 Can not create the policy due to error in data.
83:1022 Can not modify the policy due to error in data.
83:1023 Can not find the required policy.
83:1024 Cannot create the policy as another policy with the same name exists.
83:1025 Subclient [<String>] is being used for Dedup database backup.
83:1026 Subclient [<String>] is not being used for Dedup database backup.
83:1027 SRM Subclient options have been changed from [<String>] to [<String>].
83:1028 Archive files created time is changed from [<Number>] to [<Number>] days.
83:1029 File Created Time Rule Enabled.
83:1030 File Created Time Rule Disabled.
83:1031 Virtual Machine Archive Rules has changed from [<String>] to [<String>].
83:1032 Client is archived.
83:1033 Client is not Archived.
83:1034 Client Group does not exist
83:1035 Backup Archive Mailbox enabled for subclient [<String>].
83:1036 Backup Archive Mailbox disabled for subclient [<String>].
83:1037 Archive Everything enabled for subclient [<String>].
83:1038 Archive Everything disabled for subclient [<String>].
83:1039 Archive Source Online enabled for subclient [<String>].
83:1040 Archive Source Online disabled for subclient [<String>].
83:1041 Archive Source Archive enabled for subclient [<String>].
83:1042 Archive Source Archive disabled for subclient [<String>].
83:1043 Archive Source PST enabled for subclient [<String>].
83:1044 Archive Source PST disabled for subclient [<String>].
83:1045 Backup Only Files qualified for archiving enabled for subclient [<String>].
83:1046 Backup Only Files qualified for archiving disabled for subclient [<String>].
83:1047 Fpolicy Primary Client changed to [<String>].
83:1048 Fpolicy Secondary Client changed to [<String>].
83:1049 NAS HTTP Port changed to [<Number>].
83:1050 CIFS Path changed to [<String>].
83:1051 Amazon Center
83:1052 Amazon Center Access Key has been changed.
83:1053 Amazon Center Secret Key has been changed.
83:1054 Amazon Center URL now set as [<String>].
83:1055 Amazon Center Email now set as [<String>].
83:1056 Use Classic Scan Enabled.
83:1057 Use Classic Scan Disabled.
83:1058 Oracle Merge Incrementals Image Copy enabled.
83:1059 Oracle Merge Incrementals Image Copy disabled.
83:1060 Username for [<String>] changed from [<String>] to [<String>].
83:1061 User Password for [<String>] was changed.
83:1062 DB2 SQL Connect username changed from [<String>] to [<String>].
83:1063 DB2 SQL Connect User Password was changed.
83:1064 FLR Lock Data username changed from [<String>] to [<String>].
83:1065 FLR Lock Data User Password was changed.
83:1066 Informix username changed from [<String>] to [<String>].
83:1067 Informix User Password was changed.
83:1068 Oracle username changed from [<String>] to [<String>].
83:1069 Oracle User Password was changed.
83:1070 Disaster Recovery User Name changed from [<String>] to [<String>].
83:1071 Disaster Recovery Password changed.
83:1072 System state backup on full backup only disabled on this subclient.
83:1073 System state backup on full backup only enabled on this subclient.
83:1074 Oracle use Rman for log backup is enabled.
83:1075 Oracle use Rman for log backup is disabled.
83:1076 Number Of Synth Full Versions changed from [<Number>] to [<Number>].
83:1077 Explorer Based End User Recall has been Disabled.
83:1078 Explorer Based End User Recall has been Enabled.
83:1079 DB2 Backup disable switch is set to true
83:1080 DB2 Backup disable switch is set to false
83:1081 Alert Run Command(s) User Name changed from [<String>] to [<String>].
83:1082 Alert Run Command(s) Password changed.
83:1083 MediaAgent Access Path User Name changed from [<String>] to [<String>].
83:1084 MediaAgent Access Path Password changed.
83:1085 MediaAgent Device Controller User Name changed from [<String>] to [<String>].
83:1086 MediaAgent Device Controller Password changed.
83:1087 MediaAgent Data Recovery run information User Name changed from [<String>] to [<String>].
83:1088 MediaAgent Data Recovery run information Password changed.
83:1089 MediaAgent Host User Name changed from [<String>] to [<String>].
83:1090 MediaAgent Host Password changed.
83:1091 MediaAgent Mount Path User Name changed from [<String>] to [<String>].
83:1092 MediaAgent Mount Path Password changed.
83:1093 MediaAgent DMP Host Info User Name changed from [<String>] to [<String>].
83:1094 MediaAgent DMP Host Info Password changed.
83:1095 MediaAgent SANS switch proxy User Name changed from [<String>] to [<String>].
83:1096 MediaAgent SANS switch proxy Password changed.
83:1097 MediaAgent Array Management User Name changed from [<String>] to [<String>].
83:1098 MediaAgent Array Management Password changed.
83:1099 MediaAgent Control Host User Name changed from [<String>] to [<String>].
83:1100 MediaAgent Control Host Password changed.
83:1101 Quiesce Simpana enabled.
83:1102 Quiesce Simpana disabled.
83:1103 Quiesce VMWare enabled.
83:1104 Quiesce VMWare disabled.
83:1105 Auto Discovery based on folder pattern(s) enabled.
83:1106 Auto Discovery based on folder pattern(s) disabled.
83:1107 Folder pattern for auto discovery set
83:1108 MySql Backup from proxy has been Enabled.
83:1109 MySql Backup from proxy has been Disabled.
83:1110 MySql use SSL for backup from proxy has been Enabled.
83:1111 MySql use SSL for backup from proxy has been Disabled.
83:1112 MySql Backup from proxy has been Enabled.
83:1113 MySql Backup from proxy has been Disabled.
83:1114 MySql fail over backup on production has been Enabled.
83:1115 MySql fail over backup has been Disabled.
83:1116 Virtual Machine Dynamic Content has changed for Subclient : [<Number>].
83:1117 Delete snapshot after backup has been Enabled.
83:1118 Delete snapshot after backup has been Disabled.
83:1119 Block level backup has been Enabled.
83:1120 Block level backup has been Disabled.
83:1121 Pst with no owner information should be assigned to this mailbox changed from [<String>] to [<String>].
83:1122 Reference Copy enabled for subclient [<String>].
83:1123 Reference Copy disabled for subclient [<String>].
83:1124 PST Archiving enabled for subclient [<String>].
83:1125 PST Archiving disabled for subclient [<String>].
83:1126 Merge into mailbox hierarchy enabled for subclient [<String>].
83:1127 Merge into mailbox hierarchy disabled for subclient [<String>].=======
83:1128 MSSQL Integrity Server Name Changed.
83:1129 Archive Time Enabled.
83:1130 Receive Time Enabled.
83:1131 Backup only emails that qualify for archiving Enabled.
83:1132 Backup only emails that qualify for archiving Disabled.
83:1133 Virtual Machine Filters has changed for Subclient : [<Number>].
83:1134 Virtual Machine Disk Filters has changed for Subclient : [<Number>].
83:1135 MySql run log backups on proxy has been Enabled.
83:1136 MySql run log backups on proxy has been Disabled.
83:1137 For Open Files Only has been enabled.
83:1138 For Open Files Only has been disabled.
83:1139 Sybase block size changed from [<Number>] to [<Number>].
83:1140 Delete PST file only is enabled for subclient [<String>].
83:1141 Delete PST file only is disabled for subclient [<String>].
83:1142 Use Proxy for SQL integrity check enabled for subclient : [<Number>].
83:1143 Use Proxy for SQL integrity check disabled for subclient : [<Number>].
83:1144 Credentials for SQL integrity check enabled for subclient : [<Number>].
83:1145 Credentials for SQL integrity check disabled for subclient : [<Number>].
83:1146 User Name is changed for Proxy SQL Server Integrity Check for subclient : [<Number>].
83:1147 Password is changed for Proxy SQL Server Integrity Check for subclient : [<Number>].
83:1148 Retain Indefinitely
83:1149 Use storage policy copy retention after [<Number>] days.
83:1150 Prune archived items changed from [<String>] to [<String>].
83:1151 Off Line Mining Active Directory user name changed from [<String>] to [<String>] for schedule [<String>].
83:1152 Off Line Mining Active Directory user password changed for schedule [<String>]
83:1153 Impersonate user name changed from [<String>] to [<String>] for schedule [<String>].
83:1154 Impersonate user password changed for schedule [<String>]
83:1155 NT Impersonate user name changed from [<String>] to [<String>] for schedule [<String>].
83:1156 NT Impersonate user password changed for schedule [<String>]
83:1157 Share point Doc user information user name changed from [<String>] to [<String>] for schedule [<String>].
83:1158 Share point Doc user information user password changed for schedule [<String>]
83:1159 Search user information user name changed from [<String>] to [<String>] for schedule [<String>].
83:1160 Search user information user password changed for schedule [<String>]
83:1161 SyBase IQ user name changed from [<String>] to [<String>] for schedule [<String>].
83:1162 SyBase IQ user password changed for schedule [<String>]
83:1163 Domino user information user name changed from [<String>] to [<String>] for schedule [<String>].
83:1164 Domino user information user password changed for schedule [<String>]
83:1165 Virtual server disk level user name changed from [<String>] to [<String>] for schedule [<String>].
83:1166 Virtual server disk level user password changed for schedule [<String>]
83:1167 Virtual server user name changed from [<String>] to [<String>] for schedule [<String>].
83:1168 Virtual server user password changed for schedule [<String>]
83:1169 SQL server user name changed from [<String>] to [<String>] for schedule [<String>].
83:1170 SQL server user password changed for schedule [<String>]
83:1171 Oracle catalog user name changed from [<String>] to [<String>] for schedule [<String>].
83:1172 Oracle catalog user password changed for schedule [<String>]
83:1173 Report saved to user name changed from [<String>] to [<String>] for schedule [<String>].
83:1174 Report saved to user password changed for schedule [<String>]
83:1175 SQL install account user name changed from [<String>] to [<String>] for schedule [<String>].
83:1176 SQL install account user password changed for schedule [<String>]
83:1177 Client install account user name changed from [<String>] to [<String>] for schedule [<String>].
83:1178 Client install account user password changed for schedule [<String>]
83:1179 Client install job user name changed from [<String>] to [<String>] for schedule [<String>].
83:1180 Client install job user password changed for schedule [<String>]
83:1181 Download update user name changed from [<String>] to [<String>] for schedule [<String>].
83:1182 Download update job user password changed for schedule [<String>]
83:1183 CommCell Migration user name changed from [<String>] to [<String>] for schedule [<String>].
83:1184 CommCell Migration password changed for schedule [<String>]
83:1185 CommCell Migration SQL linked server user name changed from [<String>] to [<String>] for schedule [<String>].
83:1186 CommCell Migration SQL linked server user password changed for schedule [<String>]
83:1187 CommCell Migration remote DB path user name changed from [<String>] to [<String>] for schedule [<String>].
83:1188 CommCell Migration remote DB path password changed for schedule [<String>]
83:1189 CommCell Migration account user name changed from [<String>] to [<String>] for schedule [<String>].
83:1190 CommCell Migration account password changed for schedule [<String>]
83:1191 Pre/Post user name
83:1192 Pre/Post user password
83:1193 Username for UNC path
83:1194 UNC path user password
83:1195 Mining sqlInstance Name
83:1196 Mining user password
83:1197 PST file user name
83:1198 PST file user password
83:1199 Snap user name
83:1200 OCS user name
83:1201 OCS password
83:1202 SQL connect user name
83:1203 SQL connect Password
83:1204 Host password
83:1205 Host user domain name
83:1206 Site Account User
83:1207 Site Account user password
83:1208 Windows Account with SQL Admin Role
83:1209 Password for Windows Account with SQL Admin Role
83:1210 User name for Job Results Directory
83:1211 Password for Job Results Directory
83:1212 User name for [<String>]
83:1213 User password for [<String>]
83:1214 Off Line Mining Active Directory user name
83:1215 Off Line Mining Active Directory user password
83:1216 Impersonate user name
83:1217 Impersonate user password
83:1218 NT Impersonate user name
83:1219 NT Impersonate user password
83:1220 Share point Doc user information user name
83:1221 Share point Doc user information user password
83:1222 Search user information user name
83:1223 Search user information user password
83:1224 SyBase IQ user name
83:1225 SyBase IQ user password
83:1226 Domino user information user name
83:1227 Domino user information user password
83:1228 Virtual server disk level user name
83:1229 Virtual server disk level user password
83:1230 Virtual server user name
83:1231 Virtual server user password
83:1232 SQL server user name
83:1233 SQL server user password
83:1234 Oracle catalog user name
83:1235 Oracle catalog user password
83:1236 Report saved to user name
83:1237 Report saved to user password
83:1238 SQL install account user name
83:1239 SQL install account user password
83:1240 Client install account user name
83:1241 Client install account user password
83:1242 Client install job user name
83:1243 Client install job user password
83:1244 Download update user name
83:1245 Download update job user password
83:1246 Commcell Migration user name
83:1247 Commcell Migration password
83:1248 Commcell Migration SQL linked server user name
83:1249 Commcell Migration SQL linked server user password
83:1250 Commcell Migration remote DB path user name
83:1251 Commcell Migration remote DB path password
83:1252 Commcell Migration account user name
83:1253 Commcell Migration account password
83:1254 DB2 SQL Connect user name
83:1255 DB2 SQL Connect user password
83:1256 FLR Lock Data user name
83:1257 FLR Lock Data user password
83:1258 Informix user name
83:1259 Informix user password
83:1260 Oracle user name
83:1261 Oracle user password
83:1262 Disaster Recovery user name
83:1263 Disaster Recovery Password
83:1264 Alert Run Command(s) user name
83:1265 Alert Run Command(s) Password
83:1266 MediaAgent Access Path user name
83:1267 MediaAgent Access Path Password
83:1268 MediaAgent Device Controller user name
83:1269 MediaAgent Device Controller Password
83:1270 MediaAgent Data Recovery run information user name
83:1271 MediaAgent Data Recovery run information Password
83:1272 MediaAgent Host user name
83:1273 MediaAgent Host Password
83:1274 MediaAgent Mount Path user name
83:1275 MediaAgent Mount Path Password
83:1276 MediaAgent DMP Host Info user name
83:1277 MediaAgent DMP Host Info Password
83:1278 MediaAgent SANS switch proxy user name
83:1279 MediaAgent SANS switch proxy Password
83:1280 MediaAgent Array Management user name
83:1281 MediaAgent Array Management Password
83:1282 MediaAgent Control Host user name
83:1283 MediaAgent Control Host Password
83:1284 SMTP user name
83:1285 SMTP password
83:1286 IIS Server user name
83:1287 IIS Server user password
83:1288 User name for FTP Site
83:1289 Password for FTP Site
83:1290 HTTP Proxy user name
83:1291 HTTP Proxy password
83:1292 User name for CommServe Update Location
83:1293 Password for CommServe Update Location
83:1294 FTP Proxy user name
83:1295 FTP Proxy password
83:1296 SQL authentication user name
83:1297 SQL authentication password
83:1298 and user password
83:1299 Comcell Import user name
83:1300 Comcell Import user password
83:1301 Comcell Export user name
83:1302 Comcell Export user password
83:1303 Use VSS for all files enabled
83:1304 Use VSS for all files disabled
83:1305 Fail the job if VSS Snap fails enabled
83:1306 Fail the job if VSS Snap fails disabled
83:1307 Continue and reset access time if VSS Snap fails enabled
83:1308 Continue and reset access time if VSS Snap fails disabled
83:1309 Continue and donot reset access time if VSS Snap fails enabled
83:1310 Continue and donot reset access time if VSS Snap fails disabled
83:1311 Backup from Live volume enabled
83:1312 Backup from Live volume disabled
83:1313 Backup Disabled Mailbox is enabled for subclient [<String>].
83:1314 Backup Disabled Mailbox is disabled for subclient [<String>].
83:1315 Virtual Server Quiesce User Name has changed from [<String>] to [<String>] for Subclient : [<Number>].
83:1316 Virtual Server Quiesce User Password has changed for Subclient : [<Number>].
83:1317 Virtual Machine Perform Datastore Freespace check has changed for Subclient : [<Number>].
83:1318 Virtual Machine Datastore Freespace Required has changed changed from [<String>] to [<String>] for Subclient : [<Number>].
83:1319 Remove Old Stubs is enabled.
83:1320 Remove Old Stubs is disabled
83:1321 Remove Old Messages is enabled.
83:1322 Remove Old Messages is disabled
83:1323 Do Not Archive Items Before changed from [<String>] to [<String>].
83:1324 Do Not Archive Items After changed from [<String>] to [<String>].
83:1325 Disabled
83:1326 Use pre post user Enabled for FTI
83:1327 Use pre post user Enabled for SA
83:1328 Use pre post user Enabled for DB
83:1329 Use pre post user Disabled for FTI
83:1330 Use pre post user Disabled for SA
83:1331 Use pre post user Disabled for DB
83:1332 FTI prepost Backup process impersonate user name changed from [<String>] to [<String>]
83:1333 DB prepost Backup process impersonate user name changed from [<String>] to [<String>]
83:1334 SA prepost Backup process impersonate user name changed from [<String>] to [<String>]
83:1335 Retention for files deleted by archiving job changed from [<String>] to [<String>].
83:1336 Forever
83:1337 Catalog ACL option has been enabled
83:1338 Catalog ACL option has been disabled
83:1339 Catalog Additional File And System Attributes option has been enabled
83:1340 Catalog Additional File And System Attributes option has been disabled
83:1341 Proxy for SQL Integrity check changed from [<String>] to [<String>]
83:1342 Use Proxy for SQL integrity check is enabled
83:1343 Use Proxy for SQL integrity check is disabled
83:1344 Credentials for SQL integrity check is enabled
83:1345 Credentials for SQL integrity check is disabled
83:1346 User Name for Proxy SQL Server for SQL Integrity Check is changed from [<String>] to [<String>]
83:1347 Password for Proxy SQL Server for SQL Integrity Check is changed
83:1348 Prune archive items type changed from [<Number>] to [<Number>].
83:1349 Enable Two-Factor Authentication changed from [<Number>] to [<Number>].
83:1350 Use PST Name is enabled for subclient [<String>].
83:1351 Use PST Name is disabled for subclient [<String>].
83:1352 Section size changed from [<Number>] to [<Number>]
83:1353 [<String>] is enabled
83:1354 [<String>] is disabled
83:1355 Enable Metadata Collection has been Enabled.
83:1356 Enable Metadata Collection has been Disabled.
83:1357 Use PST Name to create folder option is enabled for subclient [<String>].
83:1358 Merge folders from all PSTs under the parent folder is enabled for subclient [<String>].
83:1359 Determine PST Ownership based on ACLs is selected for subclient [<String>].
83:1360 Determine PST Ownership based on Folder Hierarchy is selected for subclient [<String>].
83:1361 Determine PST Ownership based on Laptop owner,If ACLs not found is enabled for subclient [<String>].
83:1362 Determine PST Ownership based on Laptop owner,If ACLs not found is disabled for subclient [<String>].
83:1363 Changed PST Starting Folder Path from [<String>] to [<String>] for subclient [<String>].
83:1364 Changed PST AD Property from [<String>] to [<String>] for subclient [<String>].
83:1365 Sharepoint Archiver Tier 1 Archiving option is enabled
83:1366 Sharepoint Archiver Tier 1 Archiving option is disabled
83:1367 Sharepoint Archiver Tier 2 Archiving option is enabled
83:1368 Sharepoint Archiver Tier 2 Archiving option is disabled
83:1369 Only backup files created or modified on and after enabled.
83:1370 Only backup files created or modified on and after disabled.
83:1371 Only backup files created or modified on and after changed from [<Number>] to [<Number>].
83:1372 Use NAS Catalog enabled.
83:1373 Use NAS Catalog disabled.
83:1374 Use incremental changed from [<Number>] to [<Number>].
83:1375 Backup file time zone changed from [<String>] to [<String>].
83:1376 Is Turbo Subclient property is set.
83:1377 Is Turbo Subclient property is unset.
83:1378 SharePoint version changed from [<String>] to [<String>].
83:1379 Mailbox Quota Based On Disk Usage is enabled for subclient [<String>].
83:1380 Mailbox Quota Based On Disk Usage is disabled for subclient [<String>].
83:1381 Mailbox Quota Based On Disk Usage Size is changed from [<Number>] to [<Number>].
83:1382 Honor archiver agent retention changed from [<Number>] to [<Number>].
83:1383 Virtual Machine Filters has changed from: [<String>] to [<String>].
83:1384 Virtual Machine Filters pattern has changed from: [<String>] to [<String>].
83:1385 Virtual Machine Filters device node has changed from: [<String>] to [<String>].
83:1386 Virtual Machine Filters data store has changed from: [<String>] to [<String>].
83:1387 Virtual Machine Filters label has changed from: [<String>] to [<String>].
83:1388 Change block tracking enabled.
83:1389 Change block tracking disabled.=======
83:1390 Successfully enabled the alert
83:1391 Successfully disabled the alert
83:1392 Azure Center
83:1393 Azure
83:1394 Azure Username now set as [<String>].
83:1395 Azure Password has been changed.
83:1396 Warning subject for Mailbox size near quota size has been changed
83:1397 Warning Message for Mailbox size near quota size has been changed
83:1398 Warning subject for Mailbox size over quota size has been changed
83:1399 Warning Message for Mailbox size over quota size has been changed
83:1400 Exchange Online Backup Enabled.
83:1401 Exchange Online Backup Disabled.
83:1402 Exchange Online Account Username Changed.
83:1403 Exchange Online Account Password Changed.
83:1404 Exchange Online Profile changed from [<String>] to [<String>].
83:1405 Prune Messages/Stubs which users erase from media is enabled.
83:1406 Prune Messages/Stubs which users erase from media is disabled
83:1407 Dear <String>
83:1408 Data Protection Job Alert: Client exceeded quota limit
83:1409 Data protection job <String> did not start on client computer <String>. You have used <String> out of quota of <String>. Please erase unnecessary data by logging into web console at <String>.
83:1410 Data Protection Job Alert: Client nearing quota limit
83:1411 Data protection job <String> signaled warning for client computer <String>. You have used <String> out of quota of <String>. Please erase unnecessary data by logging into web console at <String>.
83:1412 Retain File Copy Based on Storage Policy Day’s Retention has been Enabled.
83:1413 Retain File Copy Based on Storage Policy Day’s Retention has been Disabled.
83:1414 Retention for stubs deleted by user changed from [<String>] to [<String>].
83:1415 Customized content in iSeries has been enabled.
83:1416 Customized content in iSeries has been disabled.
83:1417 Content selection in iSeries changed from [<String>] to [<String>].
83:1418 Synchronize libraries for backup flag in iSeries has been enabled.
83:1419 Synchronize libraries for backup flag in iSeries has been disabled.
83:1420 Target release for backup data in iSeries changed from [<String>] to [<String>].
83:1421 Save active wait time setting in iSeries changed from [<String>] to [<String>].
83:1422 Backup library objects SAVFDATA flag in iSeries has been enabled.
83:1423 Backup library objects SAVFDATA flag in iSeries has been disabled.
83:1424 Backup library objects SPLFDTA flag in iSeries has been enabled.
83:1425 Backup library objects SPLFDTA flag in iSeries has been disabled.
83:1426 Backup library objects QDTA flag in iSeries has been enabled.
83:1427 Backup library objects QDTA flag in iSeries has been disabled.
83:1428 Backup library objects PVTAUT flag in iSeries has been enabled.
83:1429 Backup library objects PVTAUT flag in iSeries has been disabled.
83:1430 Synchronization Queue setting in iSeries changed from [<String>] to [<String>].
83:1431 Program to run after libraries are synchronized setting in iSeries changed from [<String>] to [<String>].
83:1432 Data Collection Option has been changed from Discovery to Discovery and Analysis
83:1433 Data Collection Option has been changed from Discovery and Analysis to Discovery
83:1434 DB2 Use Dedupe Device flag has been changed from [<Number>] to [<Number>].
83:1435 DB2 Instance Home changed from [<String>] to [<String>].
83:1436 Changed VSS Copy On Write destination from [<String>] to [<String>] for subclient [<String>].
83:1437 Sybase Snap Dump based backup copy is enabled
83:1438 Sybase Snap Dump based backup copy is Disabled
83:1439 Sybase Snap Dump based backup copy use sybase instance is enabled
83:1440 Sybase Snap Dump based backup copy use sybase instance is Disabled
83:1441 Sybase Snap Dump based backup copy create Auxiliary server is enabled
83:1442 Sybase Snap Dump based backup copy create Auxiliary server is Disabled
83:1443 [<Message>] Home Path of Auxilary server changed from [<String>] to [<String>]
83:1444 [<Message>] ASE of Auxilary server changed from [<String>] to [<String>]
83:1445 [<Message>] Sybase OCS of Auxilary server changed from [<String>] to [<String>]
83:1446 [<Message>] User name of Auxilary server changed from [<String>] to [<String>]
83:1447 [<Message>] The Sybase Snap Configured Instance name changed from [<String>] to [<String>]
83:1448 [<Message>] The Sybase Snap Configured Instance Id changed from [<Number>] to [<Number>]
83:1449 [<Message>] The Sybase Snap Configured Client Id changed from [<Number>] to [<Number>]
83:1450 [<Message>] User password of Auxilary server changed from [<String>] to [<String>]
83:1451 \tLocations : [<String>]\n
83:1452 \tContainers : [<String>]\n
83:1453 \tMedia Repositories : [<String>]\n
83:1454 Informix Sql HostFile Entry changed from [<String>] to [<String>].
83:1455 SQL Special Subclient type changed from [<String>] to [<String>] .
83:1456 Allow metadata for Exchange Db subclient is Enabled
83:1457 Allow metadata for Exchange Db subclient is Disabled
83:1458 Number of streams for Exchange changed from [<Number>] to [<Number>].
83:1459 Archive and delete site collection is enabled.
83:1460 Archive and delete site collection is disabled.
83:1461 DB2 Skip logs in backup flag has been changed from [<Number>] to [<Number>].
83:1462 Exclude From SLA Enabled.
83:1463 Exclude From SLA Disabled.
83:1464 Delete Archive log all enabled
83:1465 Delete Archive log all disabled
83:1466 Oracle Wallet Authentication Enabled
83:1467 Oracle Wallet Authentication Disabled
83:1468 Number of job messages to be protected changed from [<Number>] to [<Number>].
83:1469 Number of job hours has been changed from [<Number>] to [<Number>].
83:1470 MAPI network error is enabled.
83:1471 MAPI network error is disabled.
83:1472 Home Path of Auxiliary server changed from [<String>] to [<String>]
83:1473 ASE of Auxiliary server changed from [<String>] to [<String>]
83:1474 Sybase OCS of Auxiliary server changed from [<String>] to [<String>]
83:1475 User name of Auxiliary server changed from [<String>] to [<String>]
83:1476 The Sybase Snap Configured Instance name changed from [<String>] to [<String>]
83:1477 The Sybase Snap Configured Instance Id changed from [<Number>] to [<Number>]
83:1478 The Sybase Snap Configured Client Id changed from [<Number>] to [<Number>]
83:1479 User password of Auxiliary server changed from [<String>] to [<String>]
83:1480 Reference copy with deletion and stubbed filter enabled for subclient [<String>].
83:1481 Reference copy with deletion and stubbed filter disabled for subclient [<String>]
83:1482 Alert Save to disk notification: User Name changed from [<String>] to [<String>].
83:1483 Alert Save to disk notification: Password changed.
83:1484 Alert Save to disk notification user name
83:1485 Alert Save to disk notification password
83:1486 Trash Can retention changed from [<Number>] days to [<Number>] days.
83:1487 Grace period for versions changed from [<Number>] days to [<Number>] days.
83:1488 Virtual Server Snap info has changed for Subclient : [<Number>].
83:1489 Transport Mode has changed from [<Number>] to [<Number>] for subclient [<String>].
83:1490 Virtual Machine Dynamic Content has changed for Subclient : [<String>].
83:1491 Virtual Machine Filters has changed for Subclient : [<String>].
83:1492 Virtual Machine Disk Filters has changed for Subclient : [<String>].
83:1493 Virtual Server Quiesce User Name has changed from [<String>] to [<String>] for Subclient : [<String>].
83:1494 Virtual Server Quiesce User Password has changed for Subclient : [<String>].
83:1495 Virtual Machine Perform Datastore Freespace check has changed for Subclient : [<String>].
83:1496 Virtual Machine Datastore Freespace Required has changed from [<String>] to [<String>] for Subclient : [<String>].
83:1497 Schedule Holiday Changes: <String>
83:1498 Use VSS Enabled for DR subclient changed from [<Number>] to [<Number>]
83:1499 Use ACS Interface [<String>]
83:1500 \nNAS Agent Global Filters : [<String>].
83:1501 PostgreSQL Instacne UNC Username changed from [<String>] to [<String>]
83:1502 PostgreSQL Instacne UNC Password changed
83:1503 SPOS Block Level option changed from [<Number>] to [<Number>].
83:1504 SPOS Block Level client reboot option changed from [<Number>] to [<Number>].
83:1505 Download protocol has been changed from [<String>] to [<String>].
83:1506 Block-Level Backup optimize option changed from [<Number>] to [<Number>].
83:1507 Oracle Data Export enabled
83:1508 Oracle Data Export disabled
83:1509 Use CVAccounts URL for SSO Redirections Enabled.
83:1510 Use CVAccounts URL for SSO Redirections Disabled.
83:1511 CVAccounts URL for SSO Redirections changed from [<String>] to [<String>].
83:1512 Recall Link will be added to Stub body
83:1513 Recall Link will not be added to Stub body
83:1514 Stub Recall is enabled on Subclient
83:1515 Stub Recall is disabled on Subclient
83:1516 Windows global filter changed from [<String>] to [<String>].
83:1517 Windows file archiver global filter changed from [<String>] to [<String>].
83:1518 IBM I global filter changed from [<String>] to [<String>].
83:1519 Unix global filter changed from [<String>] to [<String>].
83:1520 Netware global filter changed from [<String>] to [<String>].
83:1521 Exchange mailbox global filter changed from [<String>] to [<String>].
83:1522 Exchange compliance archiver global filter changed from [<String>] to [<String>].
83:1523 Content indexing global filter changed from [<String>] to [<String>].
83:1524 NAS agent global filter changed from [<String>] to [<String>].

Alert Messages

Code Description
74:1 <SUBJECT END>
74:2 <SUBJECT BEGIN>
74:3 <COMMCELL ID>
74:4 <COMMCELL NAME>
74:5 <CATEGORY>
74:6 <ALERT CATEGORY - ALERT TYPE>
74:7 <TIME>
74:8 <UTC_TIME>
74:9 <OWNER LOGIN>
74:10 <OWNER NAME>
74:11 <OWNER EMAIL>
74:12 <ALERT ID>
74:13 <ALERT NAME>
74:14 <DETECTED CRITERIA>
74:15 <NOTIFICATION TRIGGER>
74:16 <ACTUAL THRESHOLD>
74:17 <ACTUAL TIME>
74:18 <CRITERIA THRESHOLD>
74:19 <CRITERIA TYPE>
74:20 <UNIT>
74:21 <IF PERCENT>
74:22 <IS ESCALATED?>
74:23 <STATUS>
74:24 <MEDIAAGENT LIST>
74:25 <LIBRARY LIST>
74:26 <DRIVE LIST>
74:27 <CLIENT LIST>
74:28 <SUB-CLIENT LIST>
74:29 <COMMCELL LIST>
74:30 <JOB LIST>
74:31 <DB_DETAIL>
74:32 <ATTACHMENT>
74:33 <DESCRIPTION>
74:34 <BIG DATA>
74:35 <JOB ID>
74:36 <START TIME>
74:37 <END TIME>
74:38 <SCHEDULE TIME>
74:39 <FAILURE REASON>
74:40 <SP NAME>
74:41 <COPY NAME>
74:42 <CLIENT NAME>
74:43 <AGENT TYPE NAME>
74:44 <INSTANCE NAME>
74:45 <BACKUPSET NAME>
74:46 <SUBCLIENT NAME>
74:47 <LEVEL>
74:48 <PROTECTED COUNT>
74:49 <FAILED COUNT>
74:50 <RECOVERED COUNT>
74:51 <SKIPPED COUNT>
74:52 <PROTECTED OBJECTS>
74:53 <FAILED OBJECTS>
74:54 <RECOVERED OBJECTS>
74:55 <SKIPPED OBJECTS>
74:56 <MEDIA LABEL>
74:57 <LIBRARY NAME>
74:58 <CONTAINER>
74:59 <EXPORT LOCATION>
74:60 <MEDIA LIST>
74:61 <MEDIA SUCCEEDED>
74:62 <MEDIA FAILED>
74:63 <COMMENT>
74:64 <DISC SPACE LOW Y/N>
74:65 <FREE SPACE>
74:66 <FORCE DECONFIG Y/N>
74:67 <HOLIDAY CHANGES Y/N>
74:68 <MEDIAAGENT NAME>
74:69 <SCHEDULE/SCHEDULE POLICY NAME>
74:70 <SPAREPOOL/MOUNTPATH NAME>
74:71 <MEDIA SPACE LEFT>
74:72 <THRESHOLD>
74:73 <OTHER LIBRARY>
74:74 <DRIVEPOOL NAME>
74:75 <DRIVE NAME>
74:76 <INITIATER>
74:77 <SOURCE LOCATION>
74:78 <TRANSIT LOCATION>
74:79 <SP LIST>
74:80 <DESTINATION LOCATION>
74:81 <BARCODE CURRENT LOCATION>
74:82 Job Management
74:83 Configuration
74:84 Media Management
74:85 Software Updates
74:86 Library Operations
74:87 Data Aging
74:88 Auxiliary Copy
74:89 Data Protection
74:90 Data Recovery
74:91 Disaster Recovery Backup
74:92 Data Verification
74:93 Media Inventory
74:94 Scheduled Export
74:95 Media Erase
74:96 Clients
74:97 Agents
74:98 CommCell
74:99 MediaAgents
74:100 Schedules
74:101 Storage Policy
74:102 Library
74:103 Library Management
74:104 VaultTracker
74:105 Download Software
74:106 Install Updates
74:107 Erase Data
74:108 Job Succeeded
74:109 Job Failed
74:110 Job Skipped
74:111 Delayed by <2,5,1,1,-1> Hrs
74:112 List Media
74:113 Job Initiated
74:114 Rolled Back
74:115 Media Needs Import
74:116 Media Handling Required
74:117 Media Picked up
74:118 Media Reached Destination
74:119 Media Returned to Source
74:120 Job Activity
74:121 ASR Backup Occurred
74:122 Properties Modified
74:123 Alert Modified
74:124 Disk Space Low
74:125 Force De-configured
74:126 Library went Offline
74:127 Scheduler Changes
74:128 Insufficient Storage
74:129 Media Handling Errors
74:130 Media Handling Required
74:131 Media Mount and Usage Errors
74:132 Maintenance Required
74:133 Maintenance Occurred
74:134 User Overwrite of Media
74:135 Alert every <1,3,2,0,-1> attempts (Phase failures)
74:136 Drive went Offline
74:137 MediaAgent went Offline
74:138 Mount Path went Offline
74:139 Alert every <1,3,2,0,-1> attempts (Network failures)
74:140 XML message initialization failed
74:141 Failed to create alert
74:142 XML message unserialization failed
74:143 Alert notification not found
74:144  
74:145  
74:146 All
74:147 CommServe
74:148 Clients
74:149 Libraries
74:150 MediaAgents
74:151 Users
74:152 User Groups
74:153 Storage Policies
74:154 All Actions
74:155 Tracking policies
74:156 VaultTracker Via Jobs
74:157 Data protection
74:158 Auxiliary Copy
74:159 Alert with same name already exist
74:160 Successfully created the alert
74:161 Device Status
74:162 <MEDIA REQUIRED Y/N>
74:163 <FORCED DECONFIGURED Y/N>
74:164 <DISK SPACE LOW Y/N>
74:165 Not Applicable
74:166 See attachment
74:167 <PROPERTY MODIFIED Y/N>
74:168 <MOUNTPATH NAME>
74:169 Successfully deleted the alert
74:170 Failed to delete the alert
74:171 Successfully modified the alert
74:172 Failed to modify the alert
74:173 User does not have required [Alert Management] capability for this CommCell and this operation.
74:174 Error controlling alert system for CommCell.
74:175 <SUCCESSFUL CLIENT LIST>
74:176 <FAILED CLIENT LIST>
74:177 <UNKNOWN CLIENT LIST>
74:178 <UP-TO-DATE CLIENT LIST>
74:179 <ALL CLIENT LIST>
74:180 <MEDIA REQUIRE LIST>
74:181 <MEDIA LOCATION LIST>
74:182 <CONDITION CLEARED Y/N>
74:183 <USER NAME>
74:184 <AGENT TYPE ID>
74:185 <RESOURCE WAIT TIME>
74:186 Application Management
74:187 Exchange
74:188 Update Availability
74:189 Journal Mailbox Threshold Exceeded
74:190 Low Space Condition
74:191 Index Cache Folder Space Low
74:192 Service Pack Required
74:193 Release Upgrade Required
74:194 Updates Available to Download
74:195 <MESSAGE COUNT>
74:196 <SPACE THRESHOLD>
74:197 <MAILBOX NAME>
74:198 <ELAPSED TIME>
74:199 <CONTENTS>
74:200 <CONTENTS DOWNLOADED>
74:201 <TOTAL FILES AVAILABLE>
74:202 <FILES DOWNLOADED>
74:203 <DOWNLOAD SIZE (MB)>
74:204 <HIGHEST SERVICE PACK>
74:205 <CLIENT STATUS LIST>
74:206 <JOBS RUNNING CLIENT LIST>
74:207 <LOW CACHE CLIENT LIST>
74:208 <UNREACHABLE CLIENT LIST>
74:209 <SERVER RELEASE>
74:210 <CLIENT RELEASE LIST>
74:211 Escalated
74:212 Alert:
74:213 Type:
74:214 Detected Criteria:
74:215 Detected Time:
74:216 User:
74:217 Job ID:
74:218 Status:
74:219 Start Time:
74:220 Scheduled Time:
74:221 End Time:
74:222 Failure Reason:
74:223 Storage Policy Name:
74:224 Copy Name:
74:225 Client:
74:226 Agent Type:
74:227 Instance:
74:228 Backup Set:
74:229 Subclient:
74:230 Backup Level:
74:231 Failed Counts:
74:232 Protected Counts:
74:233 Skipped Counts:
74:234 Recovered Counts:
74:235 Level:
74:236 Media List:
74:237 Succeeded Media:
74:238 Failed Media:
74:239 Comments:
74:240 Property/Alert Modifications:
74:241 Disk Space Low:
74:242 Free Space Available:
74:243 Force-Deconfigured:
74:244 MediaAgent Name:
74:245 Condition Cleared:
74:246 Schedule Details:
74:247 Schedule/Schedule Policy Name:
74:248 Holiday Changes:
74:249 Library Name:
74:250 SparePool/Mount Path:
74:251 Drivepool:
74:252 Drive:
74:253 Media label:
74:254 Media/Space left:
74:255 Other library:
74:256 Mount Path:
74:257 Initiator:
74:258 Storage Policy List:
74:259 Source location:
74:260 Transit location:
74:261 Destination location:
74:262 All Client List:
74:263 Succeeded Client List:
74:264 Failed Client List:
74:265 Unknown Status Client List:
74:266 UP-TO-DATE Client List:
74:267 Mailbox Name:
74:268 Message Count:
74:269 Property Modifications:
74:270 Folder: [<String>], threshold: [<Number>] , free space:[<Number>] .
74:271 <DISK SPACE INFO>
74:272 Media Ready in Mail Slot
74:273 Log file reached high watermark
74:274 Log file volume reached low watermark
74:275 No log play activity
74:276 No transfer activity
74:277 ContinuousDataReplicator
74:278 <LOG FILE NAME>
74:279 <LAST ACTIVITY TIME>
74:280 Actual Value:
74:281 Configured Value:
74:282 <MORE MEDIA Y/N>
74:283 <LOG FILE SIZE>
74:284 <VOLUME NAME>
74:285 Machines
74:286 No Data Protection
74:287 <RD JOB Y/N>
74:288 <SNAPSHOT VOLUME UNIT>
74:289 <WORKFLOW>
74:290 Download Size (MB):
74:291 Files Downloaded:
74:292 Contents:
74:293 More Media to Export:
74:294 Media List in the Mail Slots:
74:295 Clients Requiring Update:
74:296 Clients Requiring Upgrade:
74:297 Upgrades and Service Packs
74:298 Threshold:
74:299 Volume Name:
74:300 NO ACTION
74:301 Succeeded
74:302 Completed w/ one or more errors
74:303 Failed
74:304 Failed to Start
74:305 Enabled/Disabled
74:306 Properties Modified
74:307 Security Modified
74:308 Modified
74:309 Deleted
74:310 Added
74:311 Alert Modified
74:312 Unauthorized Attempt to modify Alerted Users
74:313 Backup Set(s) Pruned
74:314 Switched On/Off-line
74:315 Mount Error
74:316 Unmount Error
74:317 Killed by User
74:318 Resumed by User
74:319 Suspended by User
74:320 Job Interrupted
74:321 Job Restarted
74:322 Job Aborted
74:323 No Spare Media
74:324 Media is not in Library
74:325 Data Protection activity Enabled/Disabled
74:326 Data Recovery activity Enabled/Disabled
74:327 Unauthorized Attempt to alter properties
74:328 Duplicate Barcode/Label
74:329 Below Low Media Threshold
74:330 Skipped Scheduled Jobs
74:331 Scheduled Job Ran
74:332 Failed to Schedule Job
74:333 CommCell Database Disk Space Low
74:334 New Content Added
74:335 Holidays Modified
74:336 Skipped due to Holiday
74:337 Disk Library Out of Space
74:338 Forced De-configure
74:339 Threshold Exceeded
74:340 No Storage Policy Defined
74:341 ASR Backup Successful
74:342 Media from different Library
74:343 Media Marked Read Only/Bad/Deprecated
74:344 Drive Requires Cleaning
74:345 Media Inventory Job Succeeded
74:346 Media Inventory Job Failed
74:347 Media Inventory Job Failed to Start
74:348 Media Inventory Job Killed by User
74:349 Scheduled Export Job Succeeded/Partially Succeeded
74:350 Scheduled Export Job Failed
74:351 Scheduled Export Job Failed to Start
74:352 Scheduled Export Job Killed by User
74:353 Media in drive needs changing
74:354 Media Required
74:355 Drive Cleaning Succeeded
74:356 Drive Cleaning Failed
74:357 Schedule Export Starts
74:358 Library Switched On/Off-line
74:359 Drive Switched On/Off-line
74:360 Mount Path Switched On/Off-line
74:361 CommCell Disk Space Low
74:362 Pending Media Movement is Created
74:363 Pending Media Movement Completed Successfully
74:364 Pending Media Movement Failed/Aborted
74:365 Media Needs Import
74:366 Media is Exported
74:367 Media is Moved to Virtual Mail Slots
74:368 Media is Picked Up
74:369 Media has Reached Destination
74:370 Media is Returned to Source
74:371 Media Movement is Rolled Back
74:372 Initiated
74:373 Overwrite Media Option Selected
74:374 Media Overwritten (User Selected)
74:375 Data Classification
74:376 Alert
74:377 CommCell:\t<String>
74:378 Client:\t\t<String>
74:379 Backup set:\t<String>
74:380 Subclient:\t<String>
74:381 Application:\t<String>
74:382 Instance:\t\t<String>
74:383 MediaAgent:\t<String>
74:384 Storage Policy:\t<String>
74:385 Library:\t\t<String>
74:386 User:\t\t<String>
74:387 Description:\t<String>
74:388 CommCell:
74:389 Classification Failed
74:390 Disk Space Low
74:391 Inactive Pair Detect
74:392 <FLR_SRC_PATH>
74:393 <FLR_DEST_PATH>
74:394 <DEST CLIENT>
74:395 <REPSET NAME>
74:396 <OPERATION TYPE>
74:397 Continuous Data Replication
74:398 Operation Type:
74:399 Replication Set:
74:400 Source Directory:
74:401 Destination Directory:
74:402 Destination Client:
74:403 <BACKUP SIZE (Compressed)>
74:404 <BACKUP SIZE (Uncompressed)>
74:405 Failed Replication
74:406 Disk Space Available:
74:407 Offline Content Indexing
74:408 <CS UPGR TIME>
74:409 <XFER BYTES>
74:410 <XFER SECS>
74:411 <XFER GB PER HOUR>
74:412 <ERR CODE>
74:413 Error Code:
74:414 SharePoint
74:415 New Virtual Servers Found. Restart IIS.
74:416 Sharepoint Version Upgraded. Restart IIS.
74:417 Client Groups
74:418 Media Recalled
74:419 <RECALL REASON>
74:420 <RECALL EXPIRE TIME>
74:421 <RECALL DESTINATION>
74:422 Recall Reason:
74:423 Recall Expiration Time:
74:424 Recall Destination:
74:425 SRM Actions
74:426 Windows File System
74:427 Unix File System
74:428 Oracle
74:429 SQL Server
74:430 NAS
74:431 Exchange
74:432 SharePoint
74:433 NetWare
74:434 Cost Analysis
74:435 Snap to Tape
74:436 Send Report
74:437 <Report ID>
74:438 <Report Hist ID>
74:439 <Report URL>
74:440 Report ID:
74:441 Report Location:
74:442 Increase in Data size by <1,2,10,1,-1> %
74:443 Decrease in Data size by <1,2,10,1,-1> %
74:444 <CURRENT BACKUP SIZE>
74:445 Current Backup Size:
74:446 <PREVIOUS BACKUP SIZE>
74:447 Previous Backup Size:
74:448 <PREVIOUS JOBID>
74:449 Previous Job ID:
74:450 <PERCENTAGE CHANGE>
74:451 Percentage Change:
74:452 <PRUNED MEDIA BARCODE LIST>
74:453 Pruned Media Barcode List:
74:454 <PRUNED JOBS COUNT>
74:455 Pruned Jobs Count:
74:456 Job Started
74:457 <RESTORE USER NAME>
74:458 <NUMBER OF ITEMS>
74:459 <SIZE>
74:460 Alert every <1,3,3,1,-1> failed login attempts
74:461 Failed Login Attempts Count:
74:462 <FAILED ATTEMPTS COUNT>
74:463 GUI Client Name:
74:464 <GUI Client Name>
74:465 User Names List:
74:466 <USER NAME LIST>
74:467 Failed Login Attempts Time List:
74:468 <FAILED ATTEMPT TIME LIST>
74:469 Clients Requiring Update/Upgrade:
74:470 Storage Policies Used:
74:471 Job Type:
74:472 <STORAGE POLICIES USED>
74:473 SRM Advisory (should never be displayed!)
74:474 SRM Data Collection
74:475 <Source RDN>
74:476 <Msg Parameters>
74:477 Failure of Exchange Server clustered resources
74:478 Disk space limited for Exchange Server
74:479 Excessive CPU utilization of Exchange Server
74:480 Failing monitoring services of Exchange Server
74:481 Low memory for Exchange Server
74:482 Windows Automatic Updates are disabled
74:483 Anti-virus software might not be installed
74:484 Disk is not used
74:485 Group exceeded storage space hard limit
74:486 Group exceeded storage space soft limit
74:487 File system quotas not enabled.
74:488 Software Firewall might not be installed
74:489 User exceeded storage space hard limit
74:490 User exceeded storage space soft limit
74:491 Volume is full
74:492 NAS aggregate is full
74:493 NAS aggregate is overcommitted
74:494 NAS aggregate is unavailable
74:495 NAS Celerra automatic extension is disabled for Storage Pool
74:496 NAS Celerra CIFS share: CIFS server is unavailable
74:497 NAS Celerra CIFS share: Data Mover is unavailable
74:498 NAS Celerra CIFS share: Storage Pool is full
74:499 NAS Celerra Data Mover is not available
74:500 NAS storage quota for group exceeded Celerra maximum limit
74:501 NAS Celerra checkpoint name has invalid extension
74:502 NAS Celerra maximum number of nested mount points under NMFS root
74:503 NAS Celerra NFS Share: Data Mover is unavailable
74:504 NAS Celerra NFS Share: Storage Pool is full
74:505 NAS Celerra disk volumes cannot be added to Storage Pool
74:506 NAS Celerra is not reachable
74:507 NAS Celerra primary Data Mover has no standby
74:508 NAS storage quota on quota tree exceeded Celerra maximum limit
74:509 NAS Celerra Storage Pool is overcommitted
74:510 NAS Celerra Storage Pool is full
74:511 NAS Celerra Meta Volume has no client volume or file system
74:512 NAS Celerra slice volume is not in Storage Pool/Meta Volume
74:513 NAS Celerra stripe volume is not in Storage Pool/Meta Volume
74:514 NAS storage quota for user exceeded Celerra maximum limit
74:515 NAS Celerra VDM is not replicated
74:516 NAS Celerra quota policy is wrong for CIFS
74:517 NAS CIFS share: file system is unavailable
74:518 NAS CIFS share: file system is full
74:519 NAS file system hosting iSCSI LUNs is exported via CIFS share
74:520 NAS CIFS share: logical volume is full
74:521 NAS CIFS share: logical volume is unavailable
74:522 NAS filer is not reachable
74:523 NAS file system is full
74:524 NAS file system is mounted but not shared
74:525 NAS logical volume is full
74:526 NAS logical volume is unavailable
74:527 NAS file system is not mounted
74:528 NAS file system hosting iSCSI LUNs is exported via NFS share
74:529 NAS NFS Share: file system is full
74:530 NAS NFS share: logical volume is full
74:531 NAS NFS share: logical volume is unavailable
74:532 NAS vFiler is not available
74:533 Pool is full
74:534 User is close to storage space quota
74:535 Database has dictionary managed tablespaces
74:536 Database has guessable passwords
74:537 Database has no SPFILE.
74:538 Database public has execute privileges
74:539 Database public account has system privileges
74:540 Database has too few control files
74:541 Database has users with unlimited login attempts
74:542 Instance has average waits that are too long
74:543 Instance does not have archive log mode
74:544 Instance does not have ASSM.
74:545 Instance does not have auto undo
74:546 Instance does not have enough redo space
74:547 Segment has too many extents
74:548 System tablespace has rollback
74:549 Table has many chained rows
74:550 Tablespace has both rollback and data
74:551 Tablespace has little free space
74:552 Tablespace has unlimited extension
74:553 System tablespace has user data
74:554 Table has too many indexes
74:555 User has the system tablespace as default
74:556 User has a temporary tablespace as permanent
74:557 Content Database site warning.
74:558 The current server configuration is invalid.
74:559 Site Collection has no usage quota assigned.
74:560 Site Collection quota size exceeded.
74:561 Site Database is not online.
74:562 Usage Analysis Processing is not enabled.
74:563 Usage Logging is not enabled.
74:564 Virtual Server has RecycleBinCleanUp Disabled.
74:565 Virtual Server has RecycleBin Disabled.
74:566 Autoclose is enabled
74:567 Auto create statistics is disabled
74:568 Autoshrink is enabled
74:569 Auto update statistics is disabled
74:570 Database in single-user mode
74:571 Database log not backed up
74:572 Database not backed up
74:573 Extent scan fragmentation for Index exceeds limit
74:574 Logical scan fragmentation for Index exceeds limit
74:575 Simple recovery mode of production database
74:576 Torn pages detected
74:577 Group exceeded block hard limit quota
74:578 Group exceeded block soft limit quota
74:579 Group exceeded file count hard limit quota
74:580 Group exceeded file count soft limit quota
74:581 Logical Volume is almost full
74:582 Logical Volume offline
74:583 Partition is almost full
74:584 Unused disk space
74:585 User exceeded block hard limit quota
74:586 User exceeded block soft limit quota
74:587 User exceeded file count hard limit quota
74:588 User exceeded file count soft limit quota
74:589 Volume Group offline
74:590 Cluster failure of [{0}] on [{1}]. Administer cluster.
74:591 Insufficient disk space for [{0}] on [{1}]. Free up unused disk space or add disk storage.
74:592 Excessive CPU Utilization for [{0}] on [{1}]. Terminate unneeded applications or upgrade system.
74:593 Monitoring services of [{0}] Exchange Server are failing. Administer Exchange Server.
74:594 Low memory for [{0}] on [{1}]. Terminate unneeded applications or extend memory.
74:595 Windows Automatic Updates are disabled.
74:596 Anti-virus software might not be installed.
74:597 Part of disk space ({0}%) of disk [{1}] is not allocated to partitions. Use Volume Manager to allocate remaining space to existing or new partitions.
74:598 Group [{0}] exceeded storage space hard limit [{1}] on file system [{2}].
74:599 Group [{0}] exceeded storage space soft limit [{1}] on file system [{2}].
74:600 Quotas are not enabled on file system [{0}].
74:601 Software Firewall might not be installed.
74:602 User [{0}] exceeded storage space hard limit [{1}] on file system [{2}].
74:603 User [{0}] exceeded storage space soft limit [{1}] on file system [{2}].
74:604 Volume [{0}] is {1}% full. Use Volume Manager to allocate additional storage.
74:605 Aggregate volume [{0}] on filer [{1}] is {2}% full.
74:606 Aggregate volume [{0}] on filer [{1}] is overcommitted.
74:607 Aggregate volume [{0}] on filer [{1}] is unavailable.
74:608 Automatic extension is disabled for system-defined Storage Pool [{0}] of Celerra [{1}].
74:609 CIFS server [{0}] of CIFS share [{1}] on Celerra [{2}] is unavailable.
74:610 Data Mover [{0}] of CIFS share [{1}] on Celerra [{2}] is unavailable.
74:611 Storage Pool [{0}] of CIFS share [{1}] on Celerra [{2}] is {3}% full.
74:612 Data Mover [{0}] of Celerra [{1}] is not available.
74:613 Storage quota on group [{0}] in file system [{1}] on Celerra [{2}] exceeded {3} TB. Set quota limit to a lower value.
74:614 Checkpoint [{0}] of file system [{1}] on Celerra [{2}] has invalid extension [{3}]. Rename the checkpoint.
74:615 Created maximum number of nested mount points under root directory [{0}] of NMFS file system [{1}] on Celerra [{2}].
74:616 Data Mover [{0}] of NFS share [{1}] on Celerra [{2}] is unavailable.
74:617 Storage Pool [{0}] of NFS share [{1}] on Celerra [{2}] is {3}% full.
74:618 No more disk volumes are available for system-defined Storage Pool [{0}] of Celerra [{1}].
74:619 Celerra [{0}] is not reachable.
74:620 Primary Data Mover [{0}] of Celerra [{1}] has no standby.
74:621 Storage quota on quota tree [{0}] in file system [{1}] on Celerra [{2}] exceeded {3} TB. Set quota limit to a lower value.
74:622 Storage Pool [{0}] on Celerra [{1}] is overcommitted.
74:623 Storage Pool [{0}] of Celerra [{1}] is {2}% full.
74:624 Meta Volume [{0}] of Celerra [{1}] has no client volume or file system.
74:625 Slice volume [{0}] of Celerra [{1}] does not belong to any Storage Pool or Meta Volume.
74:626 Stripe volume [{0}] of Celerra [{1}] does not belong to any Storage Pool or Meta Volume.
74:627 Storage quota on user [{0}] in file system [{1}] on Celerra [{2}] exceeded {3} TB. Set quota limit to a lower value.
74:628 VDM [{0}] of Celerra [{1}] is not involved in replication.
74:629 File system [{0}] on Celerra [{1}] uses wrong quota policy [{2}]. Use filesize quota policy for CIFS environment.
74:630 File system [{0}] of CIFS share [{1}] on file server [{2}] is unavailable.
74:631 File system [{0}] of CIFS share [{1}] on Celerra [{2}] is {3}% full.
74:632 File system [{0}] on Celerra [{1}] hosting iSCSI LUNs is exported through CIFS share [{2}]. A file system with iSCSI LUNs should be dedicated to iSCSI and not used for other purposes.
74:633 Logical volume [{0}] of CIFS share [{1}] on filer [{2}] is {3}% full.
74:634 Logical volume [{0}] of CIFS share [{1}] on filer [{2}] is unavailable.
74:635 Filer [{0}] is not reachable.
74:636 File system [{0}] of file server [{1}] is {2}% full.
74:637 Mounted file system [{0}] of file server [{1}] is not shared.
74:638 Logical volume [{0}] on filer [{1}] is {2}% full.
74:639 Logical volume [{0}] on filer [{1}] is unavailable. Use administrative tool to bring volume online.
74:640 File system [{0}] on file server [{1}] is not mounted.
74:641 File system [{0}] on Celerra [{1}] hosting iSCSI LUNs is exported through NFS share [{2}]. A file system with iSCSI LUNs should be dedicated to iSCSI and not used for other purposes.
74:642 File system [{0}] of NFS share [{1}] on Celerra [{2}] is {3}% full.
74:643 Logical volume [{0}] of NFS share [{1}] on filer [{2}] is {3}% full.
74:644 Logical volume [{0}] of NFS share [{1}] on filer [{2}] is unavailable.
74:645 vFiler [{0}] of filer [{1}] is not available.
74:646 The pool [{0}] on server [{1}] is {2}% full.
74:647 The user [{0}] is using {1}% of the quota limit.
74:648 In database [{0}], there are Dictionary Managed Tablespaces (other than SYSTEM and SYSAUX). Locally Managed Tablespaces may be a better choice.
74:649 In database [{0}], the accounts [{1}] have default passwords. Please change the passwords.
74:650 Database [{0}] is not using an SPFILE. Using an SPFILE is an Oracle Configuration Best Practice.
74:651 In database [{0}], PUBLIC has been granted execute any privileges. Please remove this privilege.
74:652 In database [{0}], SYSTEM privileges have been granted to PUBLIC. Please disable these privileges.
74:653 In database [{0}], the number of control files should be increased from [{1}] to at least 3.
74:654 In database [{0}], the profiles [{1}] have unlimited login attempts. These should be eliminated.
74:655 In database [{0}], instance [{1}], average wait for event [{2}] is [{3}]. This will affect performance. Try to decrease it by shifting resources to a faster disk.
74:656 In database [{0}], consider using archive log mode to enable online backups and point-in-time recovery.
74:657 In database [{0}], consider using automatic segment space management.
74:658 In database [{0}], consider using automatic undo management.
74:659 In database [{0}], instance [{1}], REDO logs are less than 1 MB in size. Undersized log files increase checkpoint activity and reduce performance. Consider increasing the size of your REDO logs.
74:660 In database [{0}], tablespace [{1}] Segment [{2}] partition [{3}] has [{4}] extents. This can result in poor performance. Consider reconfiguring with a larger extent size.
74:661 In database [{0}], there are rollback segments in the SYSTEM tablespace.
74:662 In database [{0}], table [{1}] for user [{2}] has [{3}] chained rows. Consider reinserting the chained rows (General Management of Schema Objects)
74:663 In database [{0}], tablespace [{1}] contains both Rollback and Data Segments.
74:664 In database [{0}], tablespace [{1}] has < 10% free space remaining.
74:665 In database [{0}], tablespace [{1}] has at least one data file whose size is unlimited.
74:666 In database [{0}], data segments owned by [{1}] are in tablespaces SYSTEM or SYSAUX.
74:667 In database [{0}], table [{1}] for user [{2}] has [{3}] indexes for only [{4}] segments. This results in slow performance for inserts and changes. Consider removing some indexes.
74:668 In database [{0}], user [{1}] is using a system tablespace as the default tablespace.
74:669 In database [{0}], user [{1}] is using a temporary tablespace as a permanent tablespace.
74:670 Content Database [{0}] has [{1}] sites; warning level is [{2}] and maximum level is [{3}] sites.
74:671 The current server configuration is invalid for Farm [{0}].
74:672 No Usage Quota applied to Site Collection [{0}]. Quota assignment is recommended to flag excess usage.
74:673 Quota Size for Site Collection [{0}] exceeded: Usage:[{1}]; Warning:[{2}]; Maximum:[{3}] Bytes.
74:674 Site Database [{0}] of Virtual Server [{1}] not online.
74:675 Usage Analysis Processing is not enabled on the Farm [{0}].
74:676 Usage Logging is not enabled on the Farm [{0}].
74:677 Virtual Server [{0}] on server [{1}] has RecycleBinCleanUp Disabled.
74:678 Virtual Server [{0}] on server [{1}] has RecycleBin Disabled.
74:679 Autoclose is enabled for database [{0}] of SQL Instance [{1}]; This may impact performance.
74:680 Auto create statistics is disabled for database [{0}] of SQL Instance [{1}]; This may adversely impact query performance.
74:681 Autoshrink is enabled for database [{0}] of SQL Instance [{1}]; This may impact performance.
74:682 Auto update statistics is disabled for database [{0}] of SQL Instance [{1}]; This may adversely impact query performance.
74:683 Database [{0}] of SQL Instance [{1}] is in single user mode.
74:684 Log of database [{0}] of SQL Instance [{1}] has not been backed up in the last {2} day(s).
74:685 Database [{0}] of SQL Instance [{1}] has not been backed up in the last [{2}] day(s).
74:686 Extent scan fragmentation for index [{0}] of database [{1}] table [{2}] of SQL Instance [{3}] exceeds {4}%; recommend rebuilding the index.
74:687 Logical scan fragmentation for index [{0}] of database [{1}] table [{2}] of SQL Instance [{3}] exceeds {4}%; recommend rebuilding the index.
74:688 SIMPLE recovery model is not recommended for production database [{0}] of SQL Instance [{1}].
74:689 Torn pages were detected for database [{0}] of SQL Instance [{1}]; SQL data integrity may be compromised. Recommend restoring from the backups.
74:690 Group {0} exceeded block hard limit quota {1} on file system {2}.
74:691 Group {0} exceeded block soft limit quota {1} on file system {2}.
74:692 Group {0} exceeded file count hard limit quota {1} on file system {2}.
74:693 Group {0} exceeded file count soft limit quota {1} on file system {2}.
74:694 File System {0} on logical volume {1} of volume group {2} on hostname {3} is more than 90% full.
74:695 Logical Volume {0} of Volume Group {1} of hostname {2} is offline.
74:696 File System {0} on partition {1} of disk {2} of hostname {3} is more than 90% full.
74:697 {0}% of space of disk {1} of hostname {2} is not used.
74:698 User {0} exceeded block hard limit quota {1} on file system {2}.
74:699 User {0} exceeded block soft limit quota {1} on file system {2}.
74:700 User {0} exceeded file count hard limit quota {1} on file system {2}.
74:701 User {0} exceeded file count soft limit quota {1} on file system {2}.
74:702 Volume Group {0} of hostname {1} is offline.
74:703 Auxiliary Copy fallen behind alert
74:704 Size of Data to be Copied:
74:705 <SIZE OF DATA TOBE COPIED>
74:706 Number of Media to be Copied:
74:707 <MEDIA TOBE COPIED COUNT>
74:708 Number of Jobs to be Copied:
74:709 <JOBS TOBE COPIED>
74:710 Oldest Job End Date:
74:711 <OLDEST JOB ENDDATE>
74:712 Media that got copied:
74:713 <COPIED MEDIA LIST>
74:714 Copied data size:
74:715 <COPIED DATA SIZE>
74:716 Report
74:717 Report Name:
74:718 <REPORT NAME>
74:719 Started
74:720 Information Management
74:721 Automated Content Classification Policy Name:
74:722 <AUTOMATED_CONTENT_CLASSIFICATION_POLICY_NAME>
74:723 Phases in Job:
74:724 <PHASES_IN_JOB>
74:725 Tagging
74:726 ERM Connector
74:727 Restore to a Review Set
74:728 Legal Hold
74:729 Restore
74:730 Status of Search Phase:
74:731 <STATUS OF SEARCH PHASE>
74:732 Status of Tagging Phase:
74:733 <STATUS OF TAGGING PHASE>
74:734 Status of ERM Connector Phase:
74:735 <STATUS OF ERM CONNECTOR PHASE>
74:736 Status of Restore to a Review Set Phase:
74:737 <STATUS OF RESTORE TO REVIEW SET PHASE>
74:738 Status of Legal Hold Backup Phase:
74:739 <STATUS OF LEGAL HOLD BACKUP PHASE>
74:740 Status of Legal Hold Restore Phase:
74:741 <STATUS OF LEGAL HOLD RESTORE PHASE>
74:742 Search Phase Selected to Run:
74:743 <SEARCH PHASE SELETED Y/N>
74:744 Tagging Phase Selected to Run:
74:745 <TAGGING PHASE SELECTED Y/N>
74:746 ERM Connector Phase Selected to Run:
74:747 <ERM CONNECTOR PHASE SELECTED Y/N>
74:748 Restore to Review Set Phase Selected to Run:
74:749 <RESTORE TO REVIEW SET PHASE SELECTED Y/N>
74:750 Legal Hold Backup Phase Selected to Run:
74:751 <LEGAL HOLD BACKUP PHASE SELECTED Y/N>
74:752 Legal Hold Restore Phase Selected to Run:
74:753 <LEGAL HOLD RESTORE PHASE SELECTED Y/N>
74:754 Number of Items Selected for Tagging:
74:755 <NO. OF ITEMS SELECTED FOR TAGGING>
74:756 Number of Items Tagged Successfully:
74:757 <NO. OF ITEMS TAGGED SUCCESSFULLY>
74:758 Number of Items Failed to Tag:
74:759 <NO. OF ITEMS FAILED TO TAG>
74:760 Number of Items Selected for ERM Connector:
74:761 <NO. OF ITEMS SELECTED FOR ERM CONNECTOR>
74:762 Number of Items Succeeded in ERM Connector Phase:
74:763 <NO. OF ITEMS SUCCEEDED IN ERM CONNECTOR PHASE>
74:764 Number of Items Failed in ERM Connector Phase:
74:765 <NO. OF ITEMS FAILED IN ERM CONNECTOR PHASE>
74:766 Number of Items Selected to Restore to Review Set:
74:767 <NO. OF ITEMS SELECTED TO RESTORE TO REVIEW SET>
74:768 Number of Items Succeeded in Restore to Review Set Phase:
74:769 <NO. OF ITEMS SUCCEEDED IN RESTORE TO REVIEW SET PHASE>
74:770 Number of Items Failed in Restore to Review Set Phase:
74:771 <NO. OF ITEMS FAILED IN RESTORE TO REVIEW SET PHASE>
74:772 Number of Items Selected for Legal Hold Backup:
74:773 <NO. OF ITEMS SELECTED FOR LEGAL HOLD BACKUP>
74:774 Number of Items Succeeded in Legal Hold Backup Phase:
74:775 <NO. OF ITEMS SUCCEEDED IN LEGAL HOLD BACKUP PHASE>
74:776 Number of Items Failed In Legal Hold Backup Phase:
74:777 <NO. OF ITEMS FAILED IN LEGAL HOLD BACKUP PHASE>
74:778 Number of Items Selected for Legal Hold Restore:
74:779 <NO. OF ITEMS SELECTED FOR LEGAL HOLD RESTORE>
74:780 Number of Items Succeeded in Legal Hold Restore Phase:
74:781 <NO. OF ITEMS SUCCEEDED IN LEGAL HOLD RESTORE PHASE>
74:782 Number of Items Failed In Legal Hold Restore Phase:
74:783 <NO. OF ITEMS FAILED IN LEGAL HOLD RESTORE PHASE>
74:784 Number of Items Selected to Search:
74:785 <NO. OF ITEMS SELECTED TO SEARCH>
74:786 Number of Items Searched Successfully:
74:787 <NO. OF ITEMS SEARCHED SUCCESSFULLY>
74:788 Number of Items Failed to Search:
74:789 <NO. OF ITEMS FAILED TO SEARCH>
74:790 <Virtual Machine NAME>
74:791 Failed to create alert: <String>
74:792 Successfully created the alert: <String>
74:793 Job Succeeded with Errors
74:794 <String> GB
74:795 <String> Bytes
74:796 <String> KB
74:797 <String> MB
74:798 <String> TB
74:799 <SRM Report Name>
74:800 Unknown SRM Report
74:801 <XFER SIZE>
74:802 Exchange Mailbox Store dismounted
74:803 Exchange Public Folder Store dismounted
74:804 Exchange MailBox Store [{0}] is dismounted.
74:805 Exchange Public Folder Store [{0}] is dismounted.
74:806 Extended Retention Job
74:807 <EXTENDED RET. CANDIDATE Y/N>
74:808 <RETAIN UNTIL>
74:809 Alert CommServe License Expires Within <7,15,30,-1> Days
74:810 License Expired:
74:811 <LICENSE EXPIRED>
74:812 Number Of Days Left For License Expiration:
74:813 <NO. OF DAYS LEFT FOR LICENSE EXPIRY>
74:814 Overlapping Partitions Condition Exists
74:815 Partition {0} and partition {1} are overlapping.
74:816 Attachment File Location
74:817 <XFER TIME>
74:818 <Number> Hour(s), <Number> Minute(s), <Number> Second(s)
74:819 Media Refreshing
74:820 Test Alert
74:821 Client Configuration Policy Modified
74:822 <Task ID>
74:823 Task ID:
74:824 <OBJ STORE CACHE>
74:825 DeDup DB Reconstruction
74:826 Report
74:827 <SRM Client>
74:828 <SRM Gen. Report Options>
74:829 <SRM Chart Report Options>
74:830 <SRM Query>
74:831 Clients/Client Groups:
74:832 Max Rows:
74:833 Adhoc Query:
74:834 Chart Report Options:
74:835 <CSV Output File>
74:836 <FileList>
74:837 Generated Time:
74:838 Alert when Licenses Consumed reaches <1,2,80,1,100> Percent
74:839 License Percent Consumed:
74:840 <LICENSE PERCENT CONSUMED>
74:841 No Backup for last <2,5,3,1,-1> Days
74:842 Last Successful Backup ran at
74:843 <TIME OF LAST SUCCESSFUL JOB>
74:844 <DATE OF LAST SUCCESSFUL JOB>
74:845 <NO SUCCESSFUL JOB SINCE>
74:846 [<Number>] month(s)
74:847 [<Number>] day(s)
74:848 Not backed up since:
74:849 Date of last recorded backup:
74:850 Time of last recorded backup:
74:851 Job exceeded running time of <2,5,1,1,-1> Hrs
74:852 Number of failed files is more than <1,3,100,1,-1>
74:853 Total number of objects:
74:854 <TOTAL OBJECTS>
74:855 Percentage of failed files is more than <1,2,10,1,100>
74:856 Operation
74:857 Custom Alert
74:858 DDB Store got corrupted
74:859 <DDB NAME>
74:860 DDB Store Name:
74:861 Offline Since:
74:862 <OFFLINE SINCE>
74:863 [<Number>] Hrs
74:864 Backup Copy Workflow
74:865 Backup for subclient failed consecutively for <1,3,3,1,-1> attempts
74:866 Backup job [<Number>] with job status [<String>] started at [<String>] and completed at [<String>] with failure message [<String>].
74:867 Failed Job Info:
74:868 <FAILED JOB INFO>
74:869 Alert when jobs in pending state exceed <1,2,30,1,100> percent or count of <1,3,15,1,-1>
74:870 <TOTAL JOBS>
74:871 <PENDING JOBS COUNT>
74:872 <TOP PENDING ERRORS LIST>
74:873 <TOP WAITING ERRORS LIST>
74:874 DDB disk space low
74:875 Total number of running jobs :
74:876 Number of pending jobs:
74:877 Top pending errors list:
74:878 Top waiting errors list:
74:879 Error Code: [<String>] Failure Reason : [<String>]
74:880 Message12
74:881 Message13
74:882 Message14
74:883 Message15
74:884 Message16
74:885 Message17
74:886 Message18
74:887 Message19
74:888 Message20
74:889 Message21
74:890 Message22
74:891 Message23
74:892 Message24
74:893 Message25
74:894 Not restored since:
74:895 Date of last recorded restore:
74:896 Time of last recorded restore:
74:897 <SUCCESSFULL MESSAGE>
74:898 <STATUS MESSAGE>
74:899 <ERR CODE MESSAGE>
74:900 <FAILURE REASON MESSAGE>
74:901 Failure Reason is [<String>]
74:902 Error Code is <String>
74:903 Successfully
74:904 <CHECK LOGS MESSAGE>
74:905 Please check the logs for more details.
74:906 Below Warning Threshold
74:907 Alert when client certificate Expires Within <7,15,7,-1> Days
74:908 Certificate for client [<String>] created on [<String>] expires on [<String>]
74:909 License
74:910 Log Monitoring
74:911 Matched log monitor data
74:912 Log Monitoring Criteria
74:913 <MONITORING POLICY NAME>
74:914 <MONITORING CRITERIA STRING>
74:915 <MATCHED LINE>
74:916 Log Monitoring Policy Name:
74:917 Monitoring Criteria:
74:918 Line Matched:
74:919 <MATCHED LINE NUMBER>
74:920 Line Number
74:921 Event Viewer Events
74:922 Event Viewer Events
74:923 <EVENT SEVERITY>
74:924 <EVENT DATE>
74:925 <EVENT PROGRAM>
74:926 Severity:
74:927 Program:
74:928 Event Date:
74:929 File Name:
74:930 <MATCHED LOG FILE>
74:931 Lines above matched line:
74:932 <LINES ABOVE MATCHED LINE>
74:933 Lines below matched line:
74:934 <LINES BELOW MATCHED LINE>
74:935 Description:
74:936 <EVENT ID>
74:937 Event ID:
74:938 Non-encrypted media exported
74:939 Content Indexing fallen behind alert
74:940 Operation:
74:941 Alert is marked permanent and may not be deleted.
74:942 Laptop Alerts have been enabled.
74:943 Laptop Alerts have been disabled.
74:944 <PARTIALLY SUCCESSFUL CLIENT LIST>
74:945 Partially Successful Client List:
74:946 Size:
74:947 <CLIENT GROUP NAME>
74:948 Client Group
74:949 Client Group:
74:950 <VARIABLE BODY>
74:951 MediaAgent [<String>] came online at [<String>]
74:952 Matched String
74:953 <VARIABLE END>
74:954 Client : [<String>] Agent Type : [<String>] Instance : [<String>] BackupSet: [<String>] SubClient : [<String>]
74:955 <ENTITY>
74:956 Windows Event Log Monitoring
74:957 Source
74:958 Level
74:959 Date and Time
74:960 Event Id
74:961 Task Category
74:962 Description
74:963 Computer
74:964 <TASK CATEGORY>
74:965 <COMPUTER>
74:966 <TIME>
74:967 <DATA COPIED>
74:968 <String> was copied and <String> is waiting to be copied(<String> of what was copied in the last <String> days).
74:969 Info:
74:970 Workflow
74:971 Workflows
74:972 Workflow Name:
74:973 Virtualize ME
74:974 vCenter:
74:975 <VCENTER>
74:976 ESX:
74:977 <ESX>
74:978 Data store:
74:979 <DATASTORE>
74:980 New Virtual Machine Name:
74:981 New Virtual Machine Host Name:
74:982 <VMHOSTNAME>
74:983 New Virtual Machine IP:
74:984 <IPADDRESS>
74:985 Clone Client Name:
74:986 <CLONECLIENTNAME>
74:987 Clone Host Name:
74:988 <CLONEHOSTNAME>
74:989 Estimated Time Needed For Copying:
74:990 <Number> Hour(s)
74:991 <COPY HOURS>
74:992 Number of SubClients:
74:993 <NUMBER OF SUBCLIENTS>
74:994 Custom Query
74:995 Data backed up exceeds <1,3, 5, 0, -1> GB
74:996 Substore location:
74:997 <SUBSTORE LOCATION>
74:998 Alert Reason:
74:999 <ALERT REASON>
74:1000 <INDEX 0>
74:1001 <INDEX 1>
74:1002 <INDEX 2>
74:1003 <INDEX 3>
74:1004 <INDEX 4>
74:1005 <INDEX 5>
74:1006 <INDEX 6>
74:1007 <INDEX 7>
74:1008 <INDEX 8>
74:1009 <INDEX 9>
74:1010 <INDEX 10>
74:1011 <INDEX 11>
74:1012 <INDEX 12>
74:1013 <INDEX 13>
74:1014 <INDEX 14>
74:1015 <INDEX 15>
74:1016 <INDEX 16>
74:1017 <INDEX 17>
74:1018 <INDEX 18>
74:1019 <INDEX 19>
74:1020 <INDEX 20>
74:1021 <INDEX 21>
74:1022 <INDEX 22>
74:1023 <INDEX 23>
74:1024 <INDEX 24>
74:1025 <INDEX 25>
74:1026 <INDEX 26>
74:1027 <INDEX 27>
74:1028 <INDEX 28>
74:1029 <INDEX 29>
74:1030 <INDEX 30>
74:1031 <INDEX 31>
74:1032 <INDEX 32>
74:1033 <INDEX 33>
74:1034 <INDEX 34>
74:1035 <INDEX 35>
74:1036 <INDEX 36>
74:1037 <INDEX 37>
74:1038 <INDEX 38>
74:1039 <INDEX 39>
74:1040 <INDEX 40>
74:1041 <INDEX 41>
74:1042 <INDEX 42>
74:1043 <INDEX 43>
74:1044 <INDEX 44>
74:1045 <INDEX 45>
74:1046 <INDEX 46>
74:1047 <INDEX 47>
74:1048 <INDEX 48>
74:1049 <INDEX 49>
74:1050 <INDEX 50>
74:1051 <INDEX 51>
74:1052 <INDEX 52>
74:1053 <INDEX 53>
74:1054 <INDEX 54>
74:1055 <INDEX 55>
74:1056 <INDEX 56>
74:1057 <INDEX 57>
74:1058 <INDEX 58>
74:1059 <INDEX 59>
74:1060 <INDEX 60>
74:1061 <INDEX 61>
74:1062 <INDEX 62>
74:1063 <INDEX 63>
74:1064 <INDEX 64>
74:1065 <INDEX 65>
74:1066 <INDEX 66>
74:1067 <INDEX 67>
74:1068 <INDEX 68>
74:1069 <INDEX 69>
74:1070 <INDEX 70>
74:1071 <INDEX 71>
74:1072 <INDEX 72>
74:1073 <INDEX 73>
74:1074 <INDEX 74>
74:1075 <INDEX 75>
74:1076 <INDEX 76>
74:1077 <INDEX 77>
74:1078 <INDEX 78>
74:1079 <INDEX 79>
74:1080 <INDEX 80>
74:1081 <INDEX 81>
74:1082 <INDEX 82>
74:1083 <INDEX 83>
74:1084 <INDEX 84>
74:1085 <INDEX 85>
74:1086 <INDEX 86>
74:1087 <INDEX 87>
74:1088 <INDEX 88>
74:1089 <INDEX 89>
74:1090 <INDEX 90>
74:1091 <INDEX 91>
74:1092 <INDEX 92>
74:1093 <INDEX 93>
74:1094 <INDEX 94>
74:1095 <INDEX 95>
74:1096 <INDEX 96>
74:1097 <INDEX 97>
74:1098 <INDEX 98>
74:1099 <INDEX 99>
74:1100 <INDEX 100>
74:1101 Query Name:
74:1102 <QUERY NAME>
74:1103 <VARIABLE TOKENS>
74:1104 Custom Rules
74:1105 Size of Data to be Content Indexed:
74:1106 <SIZE OF DATA TOBE CONTENT INDEXED>
74:1107 Number of Jobs to be Content Indexed:
74:1108 <JOBS TOBE CONTENT INDEXED>
74:1109 <REPORT DISPLAY NAME>
74:1110 <REPORT PARAM NAME>
74:1111 <REPORT NAME>
74:1112 <REPORT CRITERIA>
74:1113 Disk Space low for Index Cache.
74:1114 Disk space low for Job results directory.
74:1115 Disk Space low for System temp directory.
74:1116 Disk Space low for Galaxy directory.
74:1117 Disk space low for library server Database.
74:1118 Disk space low for /var directory.
74:1119 Disk space low for iDataAgent dierctory.
74:1120 Disk space low for Galaxy base directory.
74:1121 Disk space low for Galaxy temp directory.
74:1122 Disk space low for home directory.
74:1123 Commcells
74:1124 <VM FAILURE REASON>
74:1125 <VM STATUS>
74:1126 Virtual Machine Backup Status:
74:1127 Failure reason for Virtual Machine Backup:
74:1128 <VIRTUAL MACHINE NAME>
74:1129 Virtual Machine Name:
74:1130 Virtual Machine Host Name:
74:1131 <VIRTUAL MACHINE HOST NAME>
74:1132 Validation Failed : Given criteria is not supported for this alert Type.
74:1133 Validation Failed : AlertType is not given , and unable to find a unique alertType for given criteria.
74:1134 Validation Failed : Notification types [<String>] are not supported. Please use commcell console for this.
74:1135 Validation Failed : Invalid param list for criteria.Please verify all parameters are provided for given criteria.
74:1136 Validation Failed : This operation will cause this alert rule not associated to any entities. If you are trying to dissociate some entities from this alert rule , please don't dissociate all entities.
74:1137 Validation Failed : Users [<String>] are not valid.Please specify valid users.
74:1138 Validation Failed : UserGroups [<String>] are not valid.Please specify valid UserGroups.
74:1139 Permission denied : No permission to associate following entities you are trying to associate with this alert [<String>].
74:1140 Validation Failed : Alert name is empty , Please sepecify a valid alert name.
74:1141 Validation Failed : Alert criteria modification is not supported.
74:1142 <TABLE DATA>
74:1143 <INPUT DATA>
74:1144 Permission denied : User dont have enough permission to edit this alert.
74:1145 Validation Failed : This operation will cause this alert rule not associated to any user . If you are trying to dissociate some users from this alert rule ,please don't dissociate all users .
74:1146 Validation Failed : This operation will cause this alert rule not associated to any notification type. If you are trying to dissociate some notification types please don't dissociate all notification Types.
74:1147 Unknown Server Error : occured while processing. Please see the logs for more details.
74:1148 Validation Failed : Alert rule with the name [<String>] already exists. Please try this operation with different alert rule name.
74:1149 Match [<String>] times within [<String>] minutes
74:1150 <SEARCH QUERY STRING>
74:1151 <SEARCH CRITERIA>
74:1152 <SEARCH URL INFO>
74:1153 <SEARCH CRITERA MATCHED LINES>
74:1154 <JOB OPERATION>
74:1155 <PENDING CLIENT LIST>
74:1156 Pending Client List:
74:1157 <WARNING>
74:1158 Warning:
74:1159 Subclient association to this storage policy will be blocked if any of the fallen behind alert parameters exceeds three times the value specified in the Auxiliary Copy Fallen Behind Alert criteria.
74:1160 Please enable filter on Event Code to select Reporting options for event viewer alerts.
74:1161 Data analytics
74:1162 Metrics Alert
74:1163 <LEGAL HOLD NAME>
74:1164 Legal Hold Name:
74:1165 <REPORT URL>
74:1166 <REPORT MANAGE URL>
74:1167 The potential filegroup growth on drive <String>: is below the <Number> percent free space threshold ([<String>]growth/[<String>]free).
74:1168 Job Committed
74:1169 Job Committed
74:1170 <ADDITIONAL VM INFO>
74:1171 Virtual Machine backup end time
74:1172 Virtual Machine guest size
74:1173 Virtual Machine used space
74:1174 Virtual Machine powered off
74:1175 Is Virtual Machine guest size valid
74:1176 Virtual Machine Agent
74:1177 Virtual Machine size
74:1178 Virtual Machine Operating System
74:1179 Virtual Machine CBT Status
74:1180 Virtual Machine backup start time
74:1181 Virtual Machine hardware Version
74:1182 Virtual Machine backup Type
74:1183 Virtual Machine transport Mode
74:1184 Additional Information :
74:1185 <TABLE DATA XML>
74:1186 <AUDIT INFO>
74:1187 <TOTAL METRICS RESULT COUNT>
74:1188 All Entities
74:1189 <TREND DATA>
74:1190 Invalid appTypeFilter [<Number>]
74:1191 Invalid appGroupFilter [<Number>]
74:1192 Invalid Filter Operation Type
74:1193 Invalid EntityType provided [<Number>]
74:1194 Alert Modified Partially! All modifications are not applied.<BR><BR>User [<String>] requires [Edit Alert] permission to edit [<String>] alert.<BR>Currently, user [<String>] has only [<String>] permission(s).
74:1195 Permission denied : User [<String>] does not have permission to associate/remove the user(s) [<String>] as recipient(s).
74:1196 Permission denied : User [<String>] does not have permission to associate/remove the user group(s) [<String>] as recipient(s).
74:1197 Permission denied : User [<String>] do not have [Alert Management] capability on following entities [<String>] to associate/remove them from the alert.
74:1198 Backup Job Succeeded
74:1199 Backup Job Failed
74:1200 Backup Job Skipped
74:1201 Backup Delayed by <2,5,1,1,-1> Hrs
74:1202 Backup Job completed with Errors
74:1203 Backup Job Started
74:1204 Backup Job Activity
74:1205 Increase in Data size by <1,2,10,1,-1> percentage for backup job
74:1206 Decrease in Data size by <1,2,10,1,-1> percentage for backup job
74:1207 Restore Job Succeeded
74:1208 Restore Job Failed
74:1209 Restore Job Skipped
74:1210 Restore Job completed with Errors
74:1211 Restore Job Started
74:1212 Restore Job Activity
74:1213 Disk space low on client
74:1214 VM Backup succeeded
74:1215 VM Backup failed
74:1216 VM Backup succeeded with errors
74:1217 Validation Failed : Option processDiscoveredVMs in alertStatus can be selected only for Job Management->data protection alerts.
74:1218 Description:\t
74:1219 Validation Failed : Entity List is not valid. Please specify valid Entities.
74:1220 User does not have sufficient permission to subscribe to alert [<String>].
74:1221 <CLIENT HOST NAME>

Archive Manager Messages

Code Description
81:1 Please upload log files from CommServe, MediaAgent and Client and contact your vendor's support hotline with the job ID of the failed job.
81:2 Please check log file <String> for details.
81:3 Please check subclient's Storage Policy setting.
81:4 Please check if the backup job is available in the Storage Policy Copy.

Archive Manager Errors

Code Description
80:1 Data
80:2 Index
80:3 Content Indexing
80:4 Transaction Log
80:5 Filter
80:6 Undefined software error occurred.
80:7 A generic error occurred.
80:8 An error occurred in the session layer.
80:9 A timeout occurred in the session layer.
80:10 An error occurred in the data pipe layer.
80:11 There are no more chunks.
80:12 Not enough drives are available.
80:13 A socket timeout occurred.
80:14 A socket select call failed.
80:15 A socket receive call failed.
80:16 Memory allocation failed.
80:17 No qualified archive file was found.
80:18 A database query error occurred. Please check log files in CommServe for details.
80:19 Invalid Storage Policy ID. Application may not yet point to a valid Storage Policy.
80:20 Invalid incremental Storage Policy.
80:21 Invalid full Storage Policy.
80:22 Duplicate Storage Policy name.
80:23 Unable to delete storage policy due to a database error.
80:24 Storage Policy does not have a secondary copy.
80:25 Invalid Storage Policy copy ID.
80:26 Storage Policy copies are not synchronized.
80:27 Storage Policy copy is not active.
80:28 Backup On and After date of the Storage Policy copy is in future.
80:29 Storage Policy copy is not active or its Backup On and After date is in the future.
80:30 Auxiliary Copy cannot be initiated automatically for a selective copy which copy most recent full when Auxiliary Copy job starts.
80:31 The primary Storage Policy copy is invalid for this operation.
80:32 The storage policy copy is invalid for this operation because it is the source copy of a secondary copy.
80:33 Failed to get application information.
80:34 Failed to get job information.
80:35 Failed to get data pipe interface pair.
80:36 No more allocated streams are available.
80:37 Failed to create a Media Group.
80:38 Failed to get Media Groups for a Drive Pool.
80:39 Failed to get the Drive Pool for a Media Group.
80:40 There are running jobs for this application.
80:41 There are running jobs for this Storage Policy.
80:42 There are running jobs for this Storage Policy copy.
80:43 The Backup On and After date for the Storage Policy copy is invalid.
80:44 The Drive Pool does not exist in CommServe database.
80:45 The media are residing in a library where there are no compatible drives to read.
80:46 The archive file has no data.
80:47 No data need to be copied.
80:48 There is no month definition for the calendar.
80:49 Failed to get network host name.
80:50 Invalid archive file ID.
80:51 Failed to get encryption key of the archive file.
80:52 Unable to find archive file with invalid parameters.
80:53 Invalid task ID for Auxiliary Copy.
80:54 Storage Policy and Copy information were not found for an Auxiliary Copy task.
80:55 Failed to create an archive file entry in CommServe database.
80:56 No valid backup for the given subclient.
80:57 No valid backup for the given backup set.
80:58 No valid data of a given type for the given subclient.
80:59 No valid backup for the given subclient before the given time.
80:60 No valid backup for the given subclient after the given time.
80:61 No non-aged valid backup for the given subclient before the given time.
80:62 No valid backup for the subclient in the given Storage Policy Copy before the given time.
80:63 Unable to find out the reason for getting no backup with the given parameters.
80:64 The archive file ID does not exist in CommServe database.
80:65 The given archive file name does not exist in CommServe database.
80:66 There is no valid archive file for the given archive file name and Storage Policy Copy.
80:67 The archive file for the Storage Policy Copy is not valid.
80:68 There is no valid data for the archive file in any Storage Policy Copy.
80:69 The backup on a Storage Policy Copy is aged. You need to select the global option for using aged data.
80:70 The backup is aged. You need to select the global option for using aged data.
80:71 For a Deduplication copy, encryption which requires passphrase for restore is not supported.
80:72 Invalid copy precedence. Please check copy precedence setting for the Storage Policy.
80:73 Unable to delete a Storage Policy or Copy because some Filter files are still needed by other Storage Policy or Copy.
80:74 Offline Content Indexing is not configured for the Storage Policy.
80:75 Offline Content Indexing is not enabled for the Storage Policy.
80:76 The effective date of Offline Content Indexing for the Storage Policy is in future.
80:77 Offline Content Indexing is not enabled for any client associated to the Storage Policy.
80:78 No client associated to the Storage Policy has a valid license for Offline Content Indexing.
80:79 No backup data in the Storage Policy are eligible for Offline Content Indexing.
80:80 Subclients associated to a secondary copy must also be associated to its source copy.
80:81 Auxiliary Copy cannot write Multiplexed Data on to Deduplication copy as this operation is not supported.
80:82 This operation is invalid because this Storage Policy is the incremental Storage Policy of another Storage Policy.
80:83 Unable to delete this Storage Policy because it is still associated by applications.
80:84 This operation is only supported with Windows MediaAgent.
80:85 Circular source copy dependence is detected for the Storage Policy Copy and its Source Copy.
80:86 Deduplication is not enabled for this Storage Policy Copy.
80:87 Backup Silo is not enabled for this Storage Policy Copy.
80:88 Backup Silo is not configured correctly for this Storage Policy Copy.
80:89 Backup data encrypted with 7.0 or a later release version cannot be restored to a client with older version.
80:90 No valid backup for the given instance.
80:91 No valid backup for the given instance and copy.
80:92 Storage Policy does not have a snap copy.
80:93 Some snap jobs are not picked for moving to media. Possible reasons: (1) the earlier snap jobs are not picked for moving to media; (2) the later snap jobs have been moved to media.
80:94 Resources are not reserved.
80:95 BCD Index
80:96 Component Index
80:97 DB Index
80:98 N/A
80:99 Storage policy [<String>] is already existing
80:100 Storage policy Copy [<String>] is already existing
80:101 Library [<String>] is not Existing
80:102 Deduplication Can not be Enabled For Tape Library Type
80:103 Hardware cannot be compressed for Magnetic Library
80:104 The copy creation failed. Reason: <Message>
80:105 Dedupe Database Sync job will not start because the Dedupe Database is not for the active store.
80:106 Dedupe Database Sync job will not start because the Dedupe Database for the active store is not corrupted.
80:107 Dedupe Database Sync job will not start because the Dedupe Database for the active store is not reconstructable.
80:108 The Global Deduplication host copy does not exist.
80:109 Copies of the same storage policy can not use the same Global Deduplication policy.
80:110 To use a Global Deduplication policy, a storage policy copy must have the same block size.
80:111 There is no data for Content Indexing. These clients have no valid license for Offline Content Indexing: <String>.
80:112 Unable to create a dataset. Error [<String>].
80:113 Wait for being assigned to run.
80:114 Store not found.
80:115 No active subclient found for the given SIDB store.
80:116 No valid backup found on the given store.
80:117 The Global AuxCopy Policy host copy does not exist.
80:118 Copies of the same storage policy can not use the same Global AuxCopy policy.
80:119 A global auxcopy policy can not be used for data migrated from a different CommCell.
80:120 Some encrypted archive files will not be fully copied because source data are encrypted with different keys. Please enable Re-encryption.
80:121 No client associated to the Storage Policy has Content Indexing enabled.
80:122 Some snap jobs are not picked for catalog. Possible reasons: (1) the earlier snap jobs are not picked for catalog; (2) the later snap jobs have been cataloged.
80:123 Snap Job [<Number>], Storage Policy [<String>] is skipped for backup copy as the job is not picked.
80:124 Snap Job [<Number>], Storage Policy [<String>] is skipped for backup copy as the job is not available in source copy and also not marked for auxiliary copy.
80:125 Snap Job [<Number>], Storage Policy [<String>] is skipped for backup copy as the backup level of job is non-full but the full job of the cycle is not yet copied to backup copy destination.
80:126 Snap Job [<Number>], Storage Policy [<String>] is skipped for backup copy. Option not enabled on storage policy.
80:127 Snap Job [<Number>], Storage Policy [<String>] is skipped for backup copy as the backup level of job is non-full but the previous jobs in the cycle are not yet copied to backup copy destination.
80:128 Snap Job [<Number>], Storage Policy [<String>] is skipped for backup copy as a newer snap job is already backup copied for this subclient.
80:129 Backup copy validation for Snap Job [<Number>], Storage Policy [<String>] failed. A database query error occurred. Please check log files in CommServe for details.
80:130 Snap Job [<Number>], Storage Policy [<String>] is skipped for deferred catalog as the job is not picked.
80:131 Snap Job [<Number>], Storage Policy [<String>] is skipped for deferred catalog as the job is not available in source copy and also not marked for auxiliary copy.
80:132 Snap Job [<Number>], Storage Policy [<String>] is skipped for deferred catalog as the backup level of job is non-full but the full job of the cycle does not have catalog in source copy.
80:133 Snap Job [<Number>], Storage Policy [<String>] is skipped for deferred catalog. Option not enabled on storage policy.
80:134 Snap Job [<Number>], Storage Policy [<String>] is skipped for deferred catalog as the backup level of job is non-full but the previous jobs in the cycle are not yet cataloged.
80:135 Snap Job [<Number>], Storage Policy [<String>] is skipped for deferred catalog as a newer backup job is already cataloged for this subclient.
80:136 Deferred catalog validation for Snap Job [<Number>], Storage Policy [<String>] failed. A database query error occurred. Please check log files in CommServe for details.
80:137 Snap Job [<Number>], Storage Policy [<String>] is skipped for backup copy as a backup copy job is already running.
80:138 DDB Backups are still associated with this Storage Policy. Deleting this Storage Policy would result in inability to reconstruct the DDB.\n Please run a new DDB backup for the associated DDB subclients.
80:139 Some snap jobs are not picked for backup copy as they are non-full and corresponding full job of the cycle is not available for backup copy.
80:140 Some snap jobs are not picked for deferred catalog as they are non-full, no previous job in the same cycle was cataloged and corresponding full job of the cycle is not available.
80:141 Some snap jobs are not picked for backup copy as they are not available in source copy.
80:142 Some snap jobs are not picked for deferred catalog as they are not available in source copy.
80:143 Some snap jobs are not picked for backup copy as they are migrated from a different CommCell.
80:144 Some snap jobs are not picked for deferred catalog as they are migrated from a different CommCell.
80:145 Job is media deleted
80:146 Job exists in magnetic media
80:147 Job is invalid (failed/killed)
80:148 Data to Storage Policy [<String>] Copy [<String>] may not be copied now as destination MediaAgent(s) has not closed the streams allocated, will be retried soon.
80:149 Failed to commit chunk as some or all the sub stores are corrupted.
80:150 No backup data in the Storage Policy are eligible for Data Analytics.
80:151 Analytics option is not enabled for MediaAgent [<String>]
80:152 There is at least one secondary copy from this storage policy that has significant amount of data that is pending a copy operation. Adding new sub-clients may add to this already outstanding size. We advise that an auxiliary copy job be run before associating new sub-clients to this storage policy.
80:153 Data to Storage Policy [<String>] Copy [<String>] may not be copied as chunk replicate status update failed, will be retried soon.
80:154 Data to Storage Policy [<String>] Copy [<String>] may not be copied as source or destination copy is none dedupe copy.
80:155 All media agents hosting the libraries are below the required service pack level to run DDB based Data Verification job. Please install the latest service pack and restart the job.
80:156 All media agents hosting the deduplication engines are below the required service pack level to run DDB based Data Verification job. Please install the latest service pack and restart the job.
80:157 All media agents hosting the deduplication engines and libraries are below the required service pack level to run DDB based Data Verification job. Please install the latest service pack and restart the job.
80:158 Cannot unpick snapshot job when backup copy job is already running for the snap.
80:159 Can not promote copy[<String>] to primary as this is the only destination copy for spool copy[<String>].
80:160 Analytics engine is not configured for MediaAgent [<String>]
80:161 Snap Job [<Number>], Storage Policy [<String>] is skipped for backup copy as the subclient is deconfigured.
80:162 Snap Job [<Number>], Storage Policy [<String>] is skipped for deferred catalog as the subclient is deconfigured.
80:163 Invalid Job Token.
80:164 Invalid client version for performing compression after deduplication.
80:165 Unable to create an array replica copy. Array Replica Copy is already present.
80:166 Unable to create an array replica copy. Array Replica Copy is already present.
80:167 Invalid client[<String>] version for performing compression after deduplication.
80:168 Unable to toggle SILO option as the store has already initialized.
80:169 The storage policy [<String>] has significant amount of pending data to copy. Please review the documentation on \"Resolving the Auxiliary Copy Fallen Behind Alert Issues\" or temporarily disable the Auxiliary Copy Fallen Behind Alert on copy properties to continue.
80:170 Job has different encryption in source copy. ADVICE: Mark job for re-copy and then try un-age.
80:171 There are media refresh jobs running for storage policy copy. If a copy is pointing to Global Secondary copy, verify that media refresh jobs are not running for Global Secondary copy.
80:172 Data to Storage Policy [<String>] Copy [<String>] may not be copied as we failed to get Snap MediaAgent, will be retried soon.
80:173 One or more media agents hosting the deduplication engines and libraries are below the required service pack level to run Defragment Data on MountPath(s) for Deduplication Database. Please install the latest service pack and restart the job.
80:174 Failed to run defragment job because data exist on cloud library for Deduplication Database.

CommCell Migration

Code Description
106:1 CCM Export Job has started
106:2 CCM Import Job has started
106:3 CCM Job phase has failed. Please Check CCMManager.log for more details.
106:4 Answers needed for import to proceed.
106:5 One or more User info for the imported Alert [<String>] is not found on destination CommServe. Adding CCM user [<String>].
106:6 Error in initializing CommCell Migration
106:7 Failed to get restart string from Job manager
106:8 Failed to initialize CCM Options
106:9 Failed to send restart string to Job Manager
106:10 License Failure
106:11 User Impersonation failed
106:12 Invalid Dump Location
106:13 Access to Dump Path denied, please restore access and retry
106:14 Active connections to Database, Drop connections and resume the job
106:15 getPruningUpperLimit of dumpset failed.
106:16 Pruning of dumpsets failed.
106:17 Generation of Common Question File failed
106:18 Removal of Progress Files Failed.
106:19 Failed to get the supported subclients
106:20 Export of unsupported subclients requested.
106:21 Job specific directory already exists. Delete and resume the export
106:22 list.txt already exists for a fresh export request. Delete it and resume the job
106:23 common.dmp already exists. Please delete and resume the job
106:24 Restore of Commserv_Capture.dmp for common.dmp failed. Please check the following: 1)Verify if the job results directory of the CommServe client is valid and accessible. 2)Make sure that compression is not enabled on the disk having the installation base directory. 3)Verify if the file CommServ_Capture.dmp is present in the installation base directory.
106:25 Generation of Output files failed.
106:26 ccmCaptureCommCellXML failed.
106:27 Restore of Commserv_Capture.dmp for export dump failed. Please check the following: 1)Verify if the job results directory of the CommServe client is valid and accessible. 2)Make sure that compression is not enabled on the disk having the installation base directory. 3)Verify if the file CommServ_Capture.dmp is present in the installation base directory.
106:28 CCM Export Initialization failed.
106:29 Export of subclient failed.
106:30 Export of unknown entity requested.
106:31 Export Request failed.
106:32 Update of CCMCaptureEntities Table Failed.
106:33 Generation of job-specific question file failed.
106:34 Failed to get CommCell number
106:35 Error in database restore during import. Please check the following: 1)Make sure that the SQL server of source CommCell is of equal or lower version when compared to the SQL server of destination CommCell. 2)Verify if the job results directory of the CommServe client is valid and accessible. 3)Verify if any path mentioned as staging path in import options is valid and accessible. 4)Make sure that compression is not enabled on the disk having the dump files to import. 5)Verify if the path having the exported dump files is accessible and the dump files are present.
106:36 List file could not be opened for import
106:37 Row insert in CCMMERGEDUMPFILES failed.
106:38 Creation of progress file failed.
106:39 Read Questions failed for subclient entity.
106:40 Import failed to restore DB for subclient entity. Please check the following: 1)Make sure that the SQL server of source CommCell is of equal or lower version when compared to the SQL server of destination CommCell. 2)Verify if the job results directory of the CommServe client is valid and accessible. 3)Verify if any path mentioned as staging path in import options is valid and accessible. 4)Make sure that compression is not enabled on the disk having the dump files to import. 5)Verify if the path having the exported dump files is accessible and the dump files are present.
106:41 Import request failed for subclient entity.
106:42 Activate License failed after Import for subclient entity.
106:43 Read Questions failed for client entity.
106:44 Import failed to restore DB for client entity. Please check the following: 1)Make sure that the SQL server of source CommCell is of equal or lower version when compared to the SQL server of destination CommCell. 2)Verify if the job results directory of the CommServe client is valid and accessible. 3)Verify if any path mentioned as staging path in import options is valid and accessible. 4)Make sure that compression is not enabled on the disk having the dump files to import. 5)Verify if the path having the exported dump files is accessible and the dump files are present.
106:45 Import request failed for client entity.
106:46 Activate License failed after import for client entity.
106:47 Read Questions failed for MediaAgent entity.
106:48 Import failed to restore DB for MediaAgent entity. Please check the following: 1)Make sure that the SQL server of source CommCell is of equal or lower version when compared to the SQL server of destination CommCell. 2)Verify if the job results directory of the CommServe client is valid and accessible. 3)Verify if any path mentioned as staging path in import options is valid and accessible. 4)Make sure that compression is not enabled on the disk having the dump files to import. 5)Verify if the path having the exported dump files is accessible and the dump files are present.
106:49 Import request failed for MediaAgent entity.
106:50 Read Questions failed for Subclient Policies.
106:51 Import failed to restore DB for subclient policies. Please check the following: 1)Make sure that the SQL server of source CommCell is of equal or lower version when compared to the SQL server of destination CommCell. 2)Verify if the job results directory of the CommServe client is valid and accessible. 3)Verify if any path mentioned as staging path in import options is valid and accessible. 4)Make sure that compression is not enabled on the disk having the dump files to import. 5)Verify if the path having the exported dump files is accessible and the dump files are present.
106:52 Import request failed for Subclient Policies.
106:53 Import failed to restore DB for Media Locations. Please check the following: 1)Make sure that the SQL server of source CommCell is of equal or lower version when compared to the SQL server of destination CommCell. 2)Verify if the job results directory of the CommServe client is valid and accessible. 3)Verify if any path mentioned as staging path in import options is valid and accessible. 4)Make sure that compression is not enabled on the disk having the dump files to import. 5)Verify if the path having the exported dump files is accessible and the dump files are present.
106:54 Import request failed for Media Locations.
106:55 Import of unknown entity requested.
106:56 Schedule Policy [<String>] with Custom Calendar has been mapped to Standard Calendar during Import.
106:57 Number of clients limit violated.
106:58 Enough licenses not available to consume
106:59 Entity to import already exists on the destination. Failing Import Job.
106:60 Schedule Policy [<String>] from source already exists in destination CommCell as [<String>].
106:61 Alert [<String>] from source already exists in destination CommCell as [<String>].
106:62 Client Group [<String>] from source already exists in destination CommCell as [<String>].
106:63 Creation of Database Synonyms for Export Source DB Failed
106:64 Export of common dump file Failed
106:65 No Free Space available on [<String>]
106:66 No Free Disk Space available. Please Check CCMManager.log for Details.
106:67 Generation Of Dump File List For Export Failed
106:68 Validation of dump directory failed
106:69 Creation of Job Specific Export Directory Failed
106:70 Validation for cross-version export failed
106:71 Failed to check if client version supported for cross-version export
106:72 Cross-version export failed
106:73 Custom Calendar [<String>] from source already exists in destination CommCell as [<String>].
106:74 The custom calendar of one or more imported schedule is not found on destination CommServe. Using the default calendar [<String>].
106:75 Another CCM Job is already running
106:76 User [<String>] has been assigned as the owner for client group [<String>] since the original owner was not found.
106:77 One or more User group info for the imported Alert [<String>] is not found on destination CommServe and is dropped.
106:78 One or more external group info for the imported Alert [<String>] is not found on destination CommServe and is dropped.
106:79 Name change of client [<String>] to [<String>] on remote commcell [<String>]*[<String>] success.
106:80 CONFLICT: There is already a client named [<String>] with Commcell [<String>]*[<String>]. Click Yes if you still want to proceed with the name change.
106:81 CONFLICT: There is already a client with GUID [<String>] with Commcell [<String>]*[<String>]. Click Yes if you still want to proceed with the name change.
106:82 Error in name change operation in source commcell. Please check CCMManager.log for more details.
106:83 Remote commcell id=[<Number>] [<String>]*[<String>] is not reachable. Please check if Simpana services are up. If they are already up, please check CVD.log, CCMManager.log in remote commcell.
106:84 Failed to communicate with CCMManager service. Please check [<String>].log, CCMManager.log for more details.
106:85 Error in remote commcell [<String>]*[<String>] in name change operation for client [^3%ls]. Please check CCMManager.log in remote commcell.
106:86 [<String>]
106:87 ICCS operation success: [<String>]
106:88 Failed to query CommServe DB. Please check [<String>].log
106:89 Error in ICCS operation [<String>]. Please check [<String>].log
106:90 Failed to query CommServe DB on remote CommServe. Please check CCMManager.log on CommServe [<String>]*[<String>]
106:91 Error in ICCS operation [<String>] on remote CommServe. Please check CCMManager.log on CommServe [<String>]*[<String>]
106:92 [<String>]
106:93 [<String>]
106:94 Failed to share MediaAgent [<String>] with CommServe [<String>].\n
106:95 Failed to apply SSL ceritficate on MediaAgent [<String>], MediaAgent may be offline.
106:96 Remote commcell [<String>] is not reachable.\nPlease check if Simpana services are up. If they are already up, please check CVD.log, CCMManager.log in remote commcell.
106:97 Failed to update CommServe DB after MediaAgent[<String>] is shared with CommServe[<String>]. \nAny client/host name change for this MediaAgent will not be sync-ed with remote CommServe.
106:98 Failed to share client [<String>] with CommServe [<String>].\n
106:99 Failed to apply SSL ceritficate on client [<String>], client may be offline.
106:100 Failed to update CommServe DB after client[<String>] was shared with CommServe[<String>]. \nAny client/host name change for this client will not be sync-ed with remote CommServe.
106:101 [<String>] failed on POD. Please check status of job [<Number>] on remote commcell [<String>].
106:102 Remote [<String>] incomplete on POD. Please check status of job [<Number>] on remote commcell [<String>].
106:103 Handler missing for ICCS message id [<Number>]
106:104 Failed to copy captured dumps to remote location.
106:105 Failed to notify GRC on job completion
106:106 Waiting for remote [<String>] to complete on commcell [<String>]. Job Id [<Number>]
106:107 Pushback phase incomplete. Please check CCMManager.log.
106:108 Encountered unexpected incoming route configuration for remote CommCell. Please clear incoming route settings for this client and perform CommCell Registration again.

CommNet Alert

Code Description
206:1 Drives Offline
206:2 Libraries Offline
206:3 MediaAgents Offline
206:4 Job failures over time.
206:5 Clients not protected over time.
206:6 Subclients not protected over time.
206:7 Under-performing drives over time.
206:8 CommNet database disk allocation.
206:9 CommCells Unreachable
206:10 Scheduler Notification
206:11 QSM Notification
206:12 Select this alert to report when drives are offline.
206:13 Select this alert to report when libraries are offline.
206:14 Select this alert to report when MediaAgents are offline.
206:15 Select this alert to report on job failures over time.
206:16 Select this alert to report on clients not protected over time.
206:17 Select this alert to report on subclients not protected over time.
206:18 Select this alert to report Under-performing drives over time.
206:19 Select this alert to report on database disk allocation growth.
206:20 Select this alert to report when CommCells are unreachable.
206:21 Detailed Description of [Scheduler Notification]
206:22 Detailed Description of [QSM Notification]
206:23 Could not get CommNet ID from CommNet Database.
206:24 Database Error. Check CommNetServer.log for more information.
206:25 Could not start transaction.
206:26 Could not set the Isolation Level on transaction.
206:27 An alert with the name [<String>] already exists.
206:28 Detected
206:29 Cleared
206:30 Percentage of Total
206:31 Absolute Value
206:32 Alert Criteria Value [<Number>](<String>)
206:33 Alert Criteria Value [<Number>](<String>). Time period to be considered [<Number>] <String>
206:34 Alert Trigger Value [<Number>](<String>)
206:35 over the previous [<Number>] <String>, [<Number>](<String>)
206:36 % of
206:37 Unknown Trigger Bits[<Number>]
206:38 (Clients/SubClients without scheduled included)
206:39 Escalated
206:40 Regular reporting criteria for Alert [<String>] has been modified. Reporting constraints reset.
206:41 Escalated reporting criteria for Alert [<String>] has been modified. Reporting constraints reset.
206:42 Both regular and escalated reporting criteria for Alert [<String>] have been modified. Reporting constraints reset.
206:43 [<String>] MB of Disk Space allocated.
206:44 CommNet Administrative Rights required to modify Alerts.
206:45 CommNet Administrative Rights required to delete Alerts.
206:46 None.
206:47 <SUBJECT END>
206:48 <SUBJECT BEGIN>
206:49 <QNET ID>
206:50 <QNET NAME>
206:51 <ALERT TYPE>
206:52 <TIME>
206:53 <UTC_TIME>
206:54 <OWNER LOGIN>
206:55 <OWNER NAME>
206:56 <OWNER EMAIL>
206:57 <ALERT ID>
206:58 <ALERT NAME>
206:59 <DETECT CRITERIA>
206:60 <NOTIFICATION TRIGGER>
206:61 <ACTUAL THRESHOLD>
206:62 <ACTUAL TIME>
206:63 <CRITERIA THRESHOLD>
206:64 <CRITERIA TIME>
206:65 <TIME UNIT>
206:66 <IF PERCENT>
206:67 <IS ESCALATED?>
206:68 <STATUS>
206:69 <MEDIAAGENT LIST>
206:70 <LIBRARY LIST>
206:71 <DRIVE LIST>
206:72 <CLIENT LIST>
206:73 <SUB-CLIENT LIST>
206:74 <COMMCELL LIST>
206:75 <JOB LIST>
206:76 <DB_DETAIL>
206:77 <ATTACHMENT>
206:78 <DESCRIPTION>
206:79 <SCHEDULE NAME>
206:80 <REPORT NAME>
206:81 <SCHEDULE TRIGGER>
206:82 <QSM SERVER NAME>
206:83 <QSM INTERFACE NAME>
206:84 <QSM BLOB>
206:85 <BIG DATA>
206:86 Consecutive Job failures
206:87 Select this alert to report on consecutive job failures.
206:88 or more drives are offline
206:89 % or more drives are offline
206:90 or more libraries are offline
206:91 % or more libraries are offline
206:92 or more MediaAgents are offline
206:93 % or more MediaAgents are offline
206:94 or more jobs have failed
206:95 % or more jobs have failed
206:96 or more clients have not been protected
206:97 % or more clients have not been protected
206:98 or more sub-clients have not been protected
206:99 % or more sub-clients have not been protected
206:100 MB of disk is used by the CommNet database
206:101 % of space on the disk is used by the CommNet database
206:102 or more CommCells are unreachable
206:103 % or more CommCells are unreachable
206:104 or more jobs have failed consecutively
206:105 % or more jobs have failed consecutively
206:106  
206:107 hours
206:108 days
206:109 Media Management
206:110 Job Management
206:111 Administrative
206:112 QNetNewLine <ACTUAL THRESHOLD> drives are offline.QNetNewLine QNetNewLine The drives offline are:QNetNewLine <DRIVE LIST> QNetNewLine
206:113 QNetNewLine <ACTUAL THRESHOLD> drives are offline.QNetNewLine QNetNewLine The drives offline are:QNetNewLine <DRIVE LIST> QNetNewLine
206:114 <ACTUAL THRESHOLD> drives are offline.
206:115 QNetNewLine <ACTUAL THRESHOLD> drives are offline. QNetNewLine
206:116 TIME Drives Offline. RunCmd Message
206:117 QNetNewLine <ACTUAL THRESHOLD> libraries are offline.QNetNewLine QNetNewLine The libraries offline are:QNetNewLine <LIBRARY LIST> QNetNewLine
206:118 QNetNewLine <ACTUAL THRESHOLD> libraries are offline.QNetNewLine QNetNewLine The libraries offline are:QNetNewLine <LIBRARY LIST> QNetNewLine
206:119 <ACTUAL THRESHOLD> libraries are offline.
206:120 QNetNewLine <ACTUAL THRESHOLD> libraries are offline. QNetNewLine
206:121 TIME Libraries Offline. RunCmd Message
206:122 QNetNewLine <ACTUAL THRESHOLD> MediaAgents are offline.QNetNewLine QNetNewLine The MediaAgents offline are:QNetNewLine <MEDIAAGENT LIST> QNetNewLine
206:123 QNetNewLine <ACTUAL THRESHOLD> MediaAgents are offline.QNetNewLine QNetNewLine The MediaAgents offline are:QNetNewLine <MEDIAAGENT LIST> QNetNewLine
206:124 <ACTUAL THRESHOLD> MediaAgents are offline.
206:125 QNetNewLine <ACTUAL THRESHOLD> MediaAgents are offline. QNetNewLine
206:126 TIME MediaAgent Offline. RunCmd Message
206:127 QNetNewLine <ACTUAL THRESHOLD> jobs over the last <ACTUAL TIME> hours(s) failed.QNetNewLine QNetNewLine The failed jobs are:QNetNewLine <JOB LIST> QNetNewLine
206:128 QNetNewLine <ACTUAL THRESHOLD> jobs over the last <ACTUAL TIME> hours(s) failed.QNetNewLine QNetNewLine The failed jobs are:QNetNewLine <JOB LIST> QNetNewLine
206:129 '<ACTUAL THRESHOLD> jobs over the last <ACTUAL TIME> hours(s) failed.
206:130 QNetNewLine <ACTUAL THRESHOLD> jobs over the last <ACTUAL TIME> hours(s) failed. QNetNewLine
206:131 TIME Job failures Offline. RunCmd Message
206:132 QNetNewLine <ACTUAL THRESHOLD> clients over the last <ACTUAL TIME> day(s) were not protected. QNetNewLine QNetNewLine The clients not protected are:QNetNewLine <CLIENT LIST> QNetNewLine
206:133 QNetNewLine <ACTUAL THRESHOLD> clients over the last <ACTUAL TIME> day(s) were not protected. QNetNewLine QNetNewLine The clients not protected are:QNetNewLine <CLIENT LIST> QNetNewLine
206:134 <ACTUAL THRESHOLD> clients over the last <ACTUAL TIME> day(s) were not protected.
206:135 QNetNewLine <ACTUAL THRESHOLD> clients over the last <ACTUAL TIME> day(s) were not protected. QNetNewLine
206:136 TIME Clients not protected. RunCmd Message
206:137 QNetNewLine <ACTUAL THRESHOLD> sub-clients over the last <ACTUAL TIME> day(s) were not protected.QNetNewLine QNetNewLine The sub-clients not protected are:QNetNewLine <SUB-CLIENT LIST> QNetNewLine
206:138 QNetNewLine <ACTUAL THRESHOLD> sub-clients over the last <ACTUAL TIME> day(s) were not protected.QNetNewLine QNetNewLine The sub-clients not protected are:QNetNewLine <SUB-CLIENT LIST> QNetNewLine
206:139 <ACTUAL THRESHOLD> sub-clients over the last <ACTUAL TIME> day(s) were not protected.
206:140 QNetNewLine <ACTUAL THRESHOLD> sub-clients over the last <ACTUAL TIME> day(s) were not protected. QNetNewLine
206:141 TIME SubClients Not protected. RunCmd Message
206:142 QNetNewLine <ACTUAL THRESHOLD> MB of COMMNET database space now allocated for CommNet Server <QNET NAME>.QNetNewLine
206:143 QNetNewLine <ACTUAL THRESHOLD> MB of COMMNET database space now allocated for CommNet Server <QNET NAME>.QNetNewLine
206:144 <ACTUAL THRESHOLD> MB of COMMNET database space now allocated for CommNet Server <QNET NAME>.
206:145 QNetNewLine <ACTUAL THRESHOLD> MB of COMMNET database space now allocated for CommNet Server <QNET NAME>.QNetNewLine
206:146 QNetNewLine <ACTUAL THRESHOLD> MB of COMMNET database space now allocated for CommNet Server <QNET NAME>.QNetNewLine
206:147 QNetNewLine <ACTUAL THRESHOLD> CommCells are unreachable.QNetNewLine QNetNewLine The CommCells unreachable are:QNetNewLine <COMMCELL LIST> QNetNewLine
206:148 QNetNewLine <ACTUAL THRESHOLD> CommCells are unreachable.QNetNewLine QNetNewLine The CommCells unreachable are:QNetNewLine <COMMCELL LIST> QNetNewLine
206:149 <ACTUAL THRESHOLD> CommCells are unreachable.
206:150 QNetNewLine <ACTUAL THRESHOLD> CommCells are unreachable.QNetNewLine
206:151 Std CommCells Unreachable. RunCmd Message
206:152 QNetNewLine <ACTUAL THRESHOLD> sub-clients had consecutive job failures.QNetNewLine QNetNewLine The sub-clients are:QNetNewLine <SUB-CLIENT LIST> QNetNewLine
206:153 QNetNewLine <ACTUAL THRESHOLD> sub-clients had consecutive job failures.QNetNewLine QNetNewLine The sub-clients are:QNetNewLine <SUB-CLIENT LIST> QNetNewLine
206:154 <ACTUAL THRESHOLD> sub-clients had consecutive job failures.
206:155 QNetNewLine <ACTUAL THRESHOLD> sub-clients had consecutive job failures. QNetNewLine
206:156 TIME SubClients had consecutive job failures. RunCmd Message
206:157 <SUBJECT BEGIN>QNetNewLine <IS ESCALATED?> Alert <Status>: <ACTUAL THRESHOLD> <ALERT TYPE> on CommNet Server <QNET NAME>.QNetNewLine <SUBJECT END>QNetNewLine The alert <ALERT NAME> was <STATUS> on <TIME>. QNetNewLine
206:158 <SUBJECT BEGIN>QNetNewLine <IS ESCALATED?> Alert <Status>: <ACTUAL THRESHOLD> MB of COMMNET database space now allocated for CommNet Server <QNET NAME>.QNetNewLine <SUBJECT END>QNetNewLine The alert <ALERT NAME> was <STATUS> on <TIME>. QNetNewLine
206:159 <SUBJECT BEGIN>QNetNewLine <IS ESCALATED?> Alert <Status>: <ACTUAL THRESHOLD> <ALERT TYPE> on CommNet Server <QNET NAME>.QNetNewLine <SUBJECT END>QNetNewLine The alert <ALERT NAME> was <STATUS> on <TIME>. QNetNewLine
206:160 Status: <IS ESCALATED?> <Status> QNetNewLine Detected: <TIME>. QNetNewLine Name: <ALERT NAME> QNetNewLine QNetNewLine Creator (CommNet): <OWNER LOGIN> QNetNewLine
206:161 <SUBJECT BEGIN>QNetNewLine CommNet(<QNET NAME>) Scheduled Report: <REPORT NAME> -<SCHEDULE NAME> QNetNewLine <SUBJECT END> QNetNewLine Name: <SCHEDULE NAME> QNetNewLine Frequency: <SCHEDULE TRIGGER> QNetNewLine Type: <REPORT NAME> QNetNewLine QNetNewLine
206:162 <IS ESCALATED?> Alert was <STATUS>.
206:163 <SUBJECT BEGIN>QNetNewLine CommNet(<QNET NAME>) QSM: <QSM SERVER NAME> -<QSM INTERFACE NAME>QNetNewLine <SUBJECT END>QNetNewLine <QSM BLOB> QNetNewLine
206:164 QNetNewLine QNetNewLine Contact user <OWNER LOGIN> (<OWNER EMAIL>) to have your name removed from this notification distribution list.
206:165 <SUBJECT BEGIN>QNetNewLine <IS ESCALATED?> Alert <Status>: <ACTUAL THRESHOLD> sub-clients had <ALERT TYPE> on CommNet Server <QNET NAME>.QNetNewLine <SUBJECT END>QNetNewLine The alert <ALERT NAME> was <STATUS> on <TIME>. QNetNewLine
206:166 Cells synchronization Failure over time
206:167 Select this alert to report on Cells synchronization Failure over time.
206:168 QNetNewLine <ACTUAL THRESHOLD> Cells over the last <ACTUAL TIME> day(s) had synchronization Failure. QNetNewLine QNetNewLine The following Cells had synchronization Failure:QNetNewLine <CELL LIST LAST SYNC TIME> QNetNewLine
206:169 QNetNewLine <ACTUAL THRESHOLD> Cells over the last <ACTUAL TIME> day(s) had synchronization Failure. QNetNewLine QNetNewLine The following Cells had synchronization Failure:QNetNewLine <CELL LIST LAST SYNC TIME> QNetNewLine
206:170 <ACTUAL THRESHOLD> Cells over the last <ACTUAL TIME> day(s) had synchronization Failure.
206:171 QNetNewLine <ACTUAL THRESHOLD> Cells over the last <ACTUAL TIME> day(s) had synchronization Failure. QNetNewLine
206:172 TIME Cells synchronization Failure. RunCmd Message
206:173 <CELL LIST>
206:174 <QSMCELL LIST>
206:175 <CELL LIST LAST SYNC TIME>
206:176 or more Cells have synchronization Failure
206:177 CommNet database backup failure
206:178 Select this alert to report on database backup failure
206:179 <SUBJECT BEGIN>QNetNewLine <IS ESCALATED?> Alert <Status>: No successful CommNet database backups for Server <QNET NAME>.QNetNewLine <SUBJECT END>QNetNewLine The alert <ALERT NAME> was <STATUS> on <TIME>. QNetNewLine
206:180 QNetNewLine As of <TIME> there is no successful CommNet database backup for Server <QNET NAME> for over the <CRITERIA THRESHOLD> day(s). QNetNewLine
206:181 QNetNewLine As of <TIME> there is no successful CommNet database backup for Server <QNET NAME> for over the <CRITERIA THRESHOLD> day(s). QNetNewLine
206:182 As of <TIME> there is no successful CommNet database backup for Server <QNET NAME> for over the <CRITERIA THRESHOLD> day(s).
206:183 QNetNewLine As of <TIME> there is no successful CommNet database backup for Server <QNET NAME> for over the <CRITERIA THRESHOLD> day(s). QNetNewLine
206:184 QNetNewLine As of <TIME> there is no successful CommNet database backup for Server <QNET NAME> for over the <CRITERIA THRESHOLD> day(s). QNetNewLine
206:185 days left since last successful CommNet database backup

CommNet Browser

Code Description
202:1 Unknown request [0x<HexNumber>] received
202:2 Operation Succeeded.
202:3 Encountered a problem performing the requested operation.
202:4 Failed to get Events for CommCell [<String>].
202:5 Failed to get Jobs for CommCell [<String>].
202:6 Failed to get tree.
202:7 Failed to get CommNet Summary for CommNet [<String>].
202:8 Failed to get CommCell Tree for CommNet [<String>], CommCell [<String>].
202:9 Failed to get CommCell Summary for CommNet [<String>], CommCell [<String>].
202:10 Failed to get Client Summary for CommNet [<String>], CommCell [<String>], Client[<String>].
202:11 Failed to get Subclient Data Growth Summary for CommNet [<String>], CommCell [<String>], Client[<String>], Agent Type [<String>], SubClient [<String>].
202:12 Failed to get MediaAgent Summary for CommNet [<String>], CommCell [<String>], MediaAgent [<String>].
202:13 Failed to get Library Summary for CommNet [<String>], CommCell [<String>], Library [<String>].
202:14 Failed to get CommCell Status for CommNet [<String>].
202:15 Failed to get Client Status for CommNet [<String>], CommCell [<String>].
202:16 Failed to get MediaAgent Status for CommNet [<String>], CommCell [<String>].
202:17 Failed to get Library Status for CommNet [<String>], CommCell [<String>].
202:18 Failed to get Drive Status for CommNet [<String>], CommCell [<String>].
202:19 Failed to get Library Status for CommNet [<String>], CommCell [<String>], MediaAgent [<String>].
202:20 Failed to get Drive Status for CommNet [<String>], CommCell [<String>], MediaAgent [<String>].
202:21 Failed to get Drive Status for CommNet [<String>], CommCell [<String>], Library [<String>].
202:22 Failed to get User Preferences for CommNet [<String>], User [<String>].
202:23 Failed to set User Preferences for CommNet [<String>], User [<String>].
202:24 Failed to get Client Status Link Report for CommNet [<String>].
202:25 Failed to get MediaAgent Status Link Report for CommNet [<String>].
202:26 Failed to get iDataAgent Status Link Report for CommNet [<String>], iDataAgent [<String>].
202:27 Failed to get iDataAgent Status Link Report for CommNet [<String>], CommCell [<String>], iDataAgent [<String>].
202:28 Failed to get Library Status for CommNet [<String>].
202:29 Failed to get Drive Status for CommNet [<String>].
202:30 Failed to get Scratch Pool Status for CommNet [<String>], CommCell [<String>], Library [<String>].
202:31 Failed to get User Status for CommNet [<String>].
202:32 Failed to get Data Protection Report for CommNet [<String>], CommCell [<String>], IDA [<String>].
202:33 CommNet [<String>], CommCell [<String>] not found in the database.
202:34 Failed to get User List for CommNet [<String>].
202:35 Failed to get User Info for new User [<String>].
202:36 Failed to get Group List for CommNet [<String>].
202:37 Failed to get Groups list for User [<String>] on CommNet [<String>].
202:38 Failed to get users list for Group [<String>] on CommNet [<String>].
202:39 Failed to get Property Summary for User [<String>] on CommNet [<String>].
202:40 Failed to get Property Summary for Group [<String>] on CommNet [<String>].
202:41 Failed to get Associations for Group [<String>] on CommNet [<String>].
202:42 Failed to get Associated groups for CommNet [<String>].
202:43 Failed to get Associated groups for Commcell [<String>].
202:44 Failed to get License Info for CommCell [<String>].
202:45 Failed to get Data Collection Policy for CommNet [<String>].
202:46 Failed to set Data Collection Policy for CommNet [<String>].
202:47 Failed to get Data Protection Coverage Report for CommCell [<String>]
202:48 Failed to get Data Protection Coverage Report for Client [<String>] CommCell [<String>]
202:49 Failed to get Data Protection Detail Report for CommCell [<String>]
202:50 Failed to get Data Protection Job Completion Report for CommCell [<String>]
202:51 Failed to get Data Protection Activity Report for CommCell [<String>]
202:52 Failed to get Data Protection Data Growth Report for CommCell [<String>]
202:53 Failed to get Data Protection Window Utilization Report for CommCell [<String>]
202:54 Failed to attach to CommCell [<String>]
202:55 Failed to Send Sync Request to CommCell [<String>]
202:56 Failed to Look up Interface Name for CommCell [<Number>]
202:57 Failed to Fetch Data Protection Charge Back Report for CommCell [<Number>]
202:58 Failed to get CommCell Configuration for CommNet [<String>].
202:59 Failed to set CommCell Configuration for CommNet [<String>].
202:60 There is already a Cell registered with this CommNet Server with the same License Number [<Number>] (<String>). Please verify your License Information.
202:61 There is already a Cell registered with this CommNet Server with the same Display Name [<String>]. Please specify another Display Name.
202:62 Could not get Evaluation License for Cell [<String>:^2%S].
202:63 Could not open cursor to perform Cell Registration on the Database. Error [<Number>:<String>]
202:64 Failure during Perform Cell Registration. Error [<Number>:^2%S].
202:65 There is no license available for this Cell type.
202:66 There are no more CommNet Agent licenses available for Registration. Cell [<String>] will not be registered.
202:67 Cell [^1%S] is already registered with this CommNet Server [<String>]. Aborting...
202:68 Could not unregister Cell [<String>:^2%S]. Registration Error [^3%S].
202:69 Could not open cursor to perform Cell Unregistration on the Database. Error [<Number>:<String>]
202:70 Failure during Perform Cell Unregistration. Error [<Number>:^2%S]
202:71 Could not Increment CommNet Agent license for Cell Unregistration.
202:72 Could not modify configuration for Cell [<String>:^2%S] on the Database.
202:73 CommNet Server License expired or License check failed. Please upgrade license.
202:74 CommNet Server does not have an Advanced Reporting license and hence this report will not be allowed to run.
202:75 Could not retrieve properties from the Database.
202:76 Could not set properties into the Database.
202:77 Could not get License Information from the Database.
202:78 Could not update License Information for CommNet.
202:79 Could not get a new and valid ID from the License File [^1%S]
202:80 Could not update new CommNetID [<Number>] on the Database. Error [^2%S].
202:81 Failed to get CommCell Authentication list for CommNet [<String>].
202:82 Failed to set CommCell Authentication for CommCell [^1%S].
202:83 Failed to set CommCell Authentication on CommCell [^1%S].
202:84 Error Browsing Directory Path [<String>].
202:85 User [<String>] created successfully.
202:86 Problem creating User [<String>].
202:87 User [<String>] already exists.
202:88 Could not add User [<String>] to the database.
202:89 Could not associate User [<String>] with selected groups.
202:90 Group [<String>] created successfully.
202:91 Problem creating Group [<String>].
202:92 Group [<String>] already exists.
202:93 Could not add Group [<String>] to the database.
202:94 Could not associate Group [<String>] with selected users.
202:95 Could not associate Group [<String>] with selected CommNets.
202:96 Could not associate Group [<String>] with selected CommCells.
202:97 Group [<String>] properties modified successfully.
202:98 A group with the name [<String>] already exists.
202:99 Problem modifying properties for Group [<String>].
202:100 Only the description of the master group may be modified.
202:101 Cannot deselect Administration capabilities from the master group.
202:102 Successfully deleted User [<String>].
202:103 Problems deleting User [<String>].
202:104 User [<String>] is a non-deletable user.
202:105 User [<String>] does not exist and cannot be deleted.
202:106 User [<String>] is currently connected to this server and cannot be deleted at this time. This user can be disabled now and deleted later when no longer connected to the CommNet.
202:107 Successfully deleted Group [<String>].
202:108 Problems deleting Group [<String>].
202:109 Group [<String>] cannot be deleted.
202:110 User login succeeded
202:111 Unable to initialize COM.
202:112 Unable to load CVSecurity.DLL. Process cannot continue.
202:113 Maximum number of connections exceeded.
202:114 Maximum number of login attempts reached.
202:115 Invalid user name or password.
202:116 Password expired.
202:117 GUI version and Server version do not match.
202:118 Cannot disassociate the administrative user from the master group.
202:119 You are not authorized to perform this operation.
202:120 Only the administrative user is allowed to change the administrator password.
202:121 Cannot disable the administrative user.
202:122 Failed to decrypt password.
202:123 Could not find QSMCell [%ld] on Database.
202:124 Failed to create Alert [^1%S] on CommNet [<String>].
202:125 Failed to get Alert Detail for Alert [^1%S] on CommNet [<String>].
202:126 Failed to get Static Alert Info for CommNet [<String>].
202:127 Failed to get Alert List for CommNet [<String>].
202:128 Failed to delete alert [^1%S] from CommNet [<String>].
202:129 Failed to modify alert [^1%S] on CommNet [<String>].
202:130 Please refer to the CommNetServer log file (under <CommNetInstallDir>/Log Files/CommNetServer.log) for more detailed information.
202:131 Failed to get Data Protection Report for CommNet [<String>], CommCell [<String>].
202:132 Failed to get Data Protection Coverage Report for CommNet [<String>], CommCell [<String>].
202:133 Failed to get Data Protection Coverage Report for CommNet [<String>], CommCell [<String>], Client [<String>].
202:134 Failed to get Data Protection Detail Report for CommNet [<String>], CommCell [<String>].
202:135 Failed to get Data Protection Job Failure Rate Report for CommNet [<String>], CommCell [<String>].
202:136 Failed to get Data Protection Activity Report for CommNet [<String>], CommCell [<String>].
202:137 Failed to get Data Protection Data Growth Report for CommNet [<String>], CommCell [<String>].
202:138 Failed to get Data Protection Window Utilization Report for CommNet [<String>], CommCell [<String>].
202:139 Failed to Fetch Data Protection Charge Back Report for CommNet [<String>], CommCell [<String>].
202:140 Failed to get Media Management Performance Report for CommNet [<String>], CommCell [<String>].
202:141 Failed to get Media Management Prediction Report for CommNet [<String>], CommCell [<String>].
202:142 Failed to get Data Recovery Job Failure Rate Report for CommNet [<String>], CommCell [<String>].
202:143 Failed to get Data Recovery Activity Report for CommNet [<String>], CommCell [<String>].
202:144 Failed to get Data Recovery Detail Report for CommNet [<String>], CommCell [<String>].
202:145 Failed to get Q-Factor Report for CommNet [<String>], CommCell [<String>].
202:146 New Schedule [<String>] was successfully scheduled. QNetNewLine Next Run Time is at ^2%S ^3%S.
202:147 New Schedule [<String>] was successfully scheduled.
202:148 Could not add Schedule [<String>]. Error [<String>].
202:149 Schedule [<String>] was successfully updated.
202:150 Could not modify Schedule [<String>]. Error [<String>].
202:151 Could not remove Schedule [<String>]. Error [<String>].
202:152 Could not run Schedule [<String>]. Error [<String>].
202:153 This Schedule [<String>] is already running. Please try again later.
202:154 You have no rights to run this Schedule [<String>].
202:155 Schedule [<String>] completed successfully. <String>
202:156 Schedule [<String>] failed. <String>
202:157 Could not ^1%S Schedule [<String>]. Error [<String>].
202:158 Could not ^1%S Scheduler. Error [<String>].
202:159 Could not retrieve Schedule List for CommNet [<String>] from the database.
202:160 Could not retrieve information for Schedule [<String>] from the database.
202:161 Could not retrieve history information for Schedule [<String>] from the database.
202:162 Could not Fetch Job Attempt Details for CommNet [<String>] CommCell [<String>] JobID [<Number>].
202:163 Error decrypting password for User [<String>] during Directory Browse.
202:164 Could not fetch impersonation information for Schedule.
202:165 Access denied for directory [<String>].
202:166 Error decrypting password for User [<String>].
202:167 User/Password [<String>/*********] does not have access to path [<String>].
202:168 Failed to get Static Scalability Matrix for CommNet [<String>].
202:169 Failed to get Scalability Info for CommNet [<String>].
202:170 Failed to get Scalability Info for CommNet [<String>], CommCell [<String>].
202:171 Failed to get Billable Entity List for CommNet [<String>].
202:172 Failed to Create Billable Entity [<String>] for CommNet [<String>].
202:173 Cannot Create Duplicate Billable Entity [<String>] for CommNet [<String>].
202:174 Failed to Modify Billable Entity [<String>] for CommNet [<String>].
202:175 Failed to Delete Billable Entity [<String>] for CommNet [<String>].
202:176 One or more CommCell objects may still be associated with Billable Entity [<String>]. QNetNewLine If you continue, all the related associations will be removed. QNetNewLine Continue?
202:177 You have no rights to create a Billable Entity.
202:178 You have no rights to delete a Billable Entity.
202:179 You have no rights to modify a Billable Entity.
202:180 Failed to get Billable Entity Detail for Entity [<String>] CommNet [<String>].
202:181 Failed to Schedule propagating Billable Entity changes for CommNet [<String>] to CommCells.
202:182 Failed to get Cost Categories List for CommNet [<String>].
202:183 Failed to Create Cost Category [<String>] for CommNet [<String>].
202:184 Cannot Create Duplicate Cost Category [<String>] for CommNet [<String>].
202:185 Failed to Modify Cost Category [<String>] for CommNet [<String>].
202:186 Failed to Delete Cost Category [<String>] for CommNet [<String>].
202:187 One or more Storage Resources may still be associated with Cost Category [<String>]. QNetNewLine If you continue, all the related associations will be removed. QNetNewLine Continue?
202:188 You have no rights to create a Cost Category.
202:189 You have no rights to delete a Cost Category.
202:190 You have no rights to modify a Cost Category.
202:191 Cannot Modify [<String>] Cost Category.
202:192 Failed to Schedule propagating Cost Category changes for CommNet [<String>] to CommCells.
202:193 Failed to get Billing Report for CommNet [<String>].
202:194 Failed to get Billing Config Report for CommNet [<String>].
202:195 Failed to get Q-Factor list for CommNet [<String>].
202:196 Failed to update Q-Factor list for CommNet [<String>].
202:197 You have no rights to update CommNet Q-Factor values for CommNet [<String>].
202:198 Failed to get Client Tree for CommNet [<String>], CommCell [<String>], Client [<String>].
202:199 Failed to get Client Primary Storage Data Growth Summary for CommNet [<String>], CommCell [<String>], Client[<String>].
202:200 Failed to get Client Secondary Storage Data Growth Summary for CommNet [<String>], CommCell [<String>], Client[<String>].
202:201 Failed to set QSM Authentication.
202:202 Failed to get QSM Tree for CommNet [<String>], QSMCell [<String>].
202:203 Failed to get QSM Summary for CommNet [<String>], QSMCell [<String>].
202:204 Failed to get QSMCell Status for CommNet [<String>].
202:205 Failed to get QSM Client Status for CommNet [<String>], QSMCell [<String>].
202:206 Failed to get Primary Storage Data Growth for CommNet [<String>].
202:207 Failed to get Client Status for CommNet [<String>], CommCell [<String>], Client Group [<String>].
202:208 Failed to get Client Group Status for CommNet [<String>], CommCell [<String>].
202:209 Failed to get Data Protection Billing Detail Report for CommNet [<String>], CommCell [<String>].
202:210 GUI SP Level and Server SP Level do not match.
202:211 Could not retrieve AppType List for CommNet [<String>] from the database.
202:212 Cell-Client Group [<String>] already exists.
202:213 You have no rights to modify Cell-Client Group [<String>].
202:214 You have no rights to delete Cell-Client Group [<String>].
202:215 Failed to Create Cell-Client Group [<String>] for CommNet [<String>].
202:216 Failed to Modify Cell-Client Group [<String>] for CommNet [<String>].
202:217 Failed to Delete Cell-Client Group [<String>] for CommNet [<String>].
202:218 Cell-Client Group [<String>] does not exist.
202:219 Failed to get Summary for Cell-Client Group [<String>] on CommNet [<String>].
202:220 Failed to get Cell-Client Group Status for CommNet [<String>].
202:221 Failed to get Cell-Client Group Tree for CommNet [<String>], Cell-Client Group [<String>].
202:222 Database Error. Check CommNetServer.log for more information.
202:223 Could not start transaction.
202:224 Could not set the Isolation Level on transaction.
202:225 CommCell
202:226 QSMCell
202:227 Cell-Client Group
202:228 Failed to get Primary Storage Data Growth for CommNet [<String>], [<String>] [<String>].
202:229 Failed to get Data Protection Report for CommNet [<String>], [<String>] [<String>].
202:230 Failed to get Data Protection Coverage Report for CommNet [<String>], [<String>] [<String>].
202:231 Failed to get Data Protection Job Failure Rate Report for CommNet [<String>], [<String>] [<String>].
202:232 Failed to get Data Protection Activity Report for CommNet [<String>], [<String>] [<String>].
202:233 Failed to get Data Protection Data Growth Report for CommNet [<String>], [<String>] [<String>].
202:234 Failed to get Data Protection Window Utilization Report for CommNet [<String>], [<String>] [<String>].
202:235 Failed to get Data Recovery Job Failure Rate Report for CommNet [<String>], [<String>] [<String>].
202:236 Failed to get Data Recovery Activity Report for CommNet [<String>], [<String>] [<String>].
202:237 Failed to get Q-Factor Report for CommNet [<String>], [<String>] [<String>].
202:238 Failed to get Billing Report for CommNet [<String>], [<String>] [<String>].
202:239 Failed to get CommNet Data Protection Activity for CommNet [<String>].
202:240 Failed to get CommNet Primary Storage Agents Overview for CommNet [<String>].
202:241 Failed to get Cell Growth Report for CommNet [<String>], [<String>] [<String>].
202:242 Failed to get Data Protection SubClient Detail Report for CommNet [<String>], [<String>] [<String>].
202:243 Failed to get Display name for TimeZone [<String>].
202:244 Failed to get TimeZones list.
202:245 Failed to get Data Protection Consecutive Job Failure Report for CommNet [<String>], [<String>] [<String>].
202:246 DataClassSet
202:247 Failed to get File Replications for CommCell [<String>].
202:248 Failed to get Client Status for CommNet [<String>], Cell-Client Group [<String>].
202:249 There are no more QSMCell licenses available for Registration. Cell [<String>] will not be registered.
202:250 Could not Increment QSMCell license for Cell UnRegistration.
202:251 Failed to get Cell Growth Report Per Agent for CommNet [<String>], [<String>] [<String>].
202:252 Failed to get Global Filter list for CommNet [<String>].
202:253 Failed to update Global Filter list for CommNet [<String>].
202:254 You have no rights to update CommNet Global Filters for CommNet [<String>].
202:255 Failed to Schedule propagating Global Filter changes for CommNet [<String>] to CommCells.
202:256 Failed to get Resource View for CommCell [<String>].
202:257 Failed to get Resource View for CommNet [<String>].
202:258 Failed to get CommCell Load Status for CommCell [<String>].
202:259 Failed to get CommCell Load Report for CommNet [<String>], [<String>] [<String>].
202:260 Could not retrieve Provider [<String>] information from the database.
202:261 Invalid User or Password for External User Login
202:262 Failed to get properties for user [<String>].
202:263 Provider not added. A provider with this name already exists.
202:264 Provider not added. Either credentials supplied are incorrect or Provider is not currently available for verification.
202:265 Problem encountered interfacing to SQL database. Consult CommNet Server log file for details.
202:266 Provider not added. Credentials provided do not have required Browse Privileges.
202:267 Provider does not exist or has been disabled.
202:268 Failed to update SSO Credentials. Error [^1%S].
202:269 Failure in getting provider [<String>] information. Error[^1%S]
202:270 Could not register Service Principle Name for provider [<String>].
202:271 Failed to get Provider List for CommNet [<String>].
202:272 Failed to get jobs information for CommNet [<String>], CommCell [<String>].
202:273 Failed to decrypt data using standard decryption
202:274 Failed to encrypt data using secure socket encryption
202:275 Failed to get Restore Stub Recall Report for CommNet [<String>], [<String>] [<String>].
202:276 Failed to get Restore Stub Recall Detail Report for [<String>], [<String>] [<String>].
202:277 Failed to get Cleaning Media Summary Report
202:278 Failed to get Health Check data for CommNet [<String>], [<String>] [<String>].
202:279 Generic Request [%s] failed to be sent to CommCell.
202:280 Failed to get Library Detail for CommNet [<String>], CommCell [<String>], Library [<String>].
202:281 Failed to get MediaAgent Detail for CommNet [<String>], CommCell [<String>], MediaAgent [<String>].
202:282 Failed to get Drive Detail for CommNet [<String>], CommCell [<String>], Drive [<String>].
202:283 Failed to get Media Detail for CommNet [<String>], CommCell [<String>], Media [<String>].
202:284 Please refer to the CommNetAgent log file (under <CommServeInstallDir>/Log Files/CommNetAgent.log) for more detailed information.
202:285 Failed to get Media Management Media Information Report for CommNet [<String>], CommCell [<String>].
202:286 Failed to get VaultTracker Actions for CommCell [<String>].
202:287 Could not fetch VaultTracker Action Detail for CommNet [<String>] CommCell [<String>] ActionID [<Number>].
202:288 Failed to get Media Management VaultTracker Report for CommNet [<String>], CommCell [<String>].=======
202:289 Enable Managed Disk Space for Disk Library Data
202:290 Data Aging Disabled
202:291 Spool Copy (No Retention)
202:292 Infinite
202:293 Retain for <Number> days <Number> cycles
202:294 Retain Archiver data for infinite
202:295 Retain Archiver data for <Number> days
202:296 For Weekly Full Rule the week starts on <String>
202:297 For Monthly Full Rule the month starts on <Number>
202:298 for <Number> days
202:299 infinitely
202:300 For all rules, keep the first full backup of time period
202:301 For all rules, keep the last full backup of time period
202:302 Retain ALL Full Jobs
202:303 Retain One Full Every Week
202:304 Retain One Full Every Month
202:305 Retain One Full Every Quarter
202:306 Retain One Full Every Half Year
202:307 Retain One Full Every Year
202:308 No Rule Defined
202:309 Failed to retrieve entity description for CommNet [<String>]
202:310 Commvault OEM Eval Extension license is being applied to non Commvault OEM Eval license. Do you want to continue?.
202:311 Failed to set entity description for [<String>] with [<Number>], [<Number>], [<Number>] on [<String>]
202:312 The following host names are unresolvable by the AD : [<String>]
202:313 Configured NetBios Name [<String>] did not resolve with Domain NetBios Name[<String>]. If you still continue, SSO may not work. Would you like to continue?(If you select NO, system resolves the netBiosName).
202:314 DNS Root is not resolved. Ensure additional domain controllers are configured to work in failover situations.
202:315 Databases
202:316 Password for logged-in user incorrect.
202:317 Failed to update the new password. Check CommNet Server log file for details.
202:318 Password decryption failed.
202:319 Failed to get the domain information from Database. Check CommNet Server log file for details.
202:320 Error in initializing connection to AD server. Check CommNet Server log file for details.
202:321 Below (<String>)
202:322 Ahead (<String>)
202:323 Failed to get SRM Job Failure Rate Report for CommNet [<String>], [<String>] [<String>].
202:324 Failed to get SRM Job Detail Report for CommNet [<String>], CommCell [<String>].
202:325 Failed to check if license is available.
202:326 Failed to get Media Management Library Stats Report for CommNet [<String>], CommCell [<String>].
202:327 Failed to get SRM Activity Report for CommNet [<String>], [<String>] [<String>].
202:328 Failed to get Admin Job Report for CommNet [<String>], [<String>] [<String>].
202:329 Failed to get Admin Job Detail Report for CommNet [<String>], [<String>] [<String>].
202:330 Failed to delete user QFactor.
202:331 Data Collection Policy is not enabled for some CommCell(s).

CommNet Licensing

Code Description
204:1 No licenses are consumed. Cannot decrement license.
204:2 Invalid arguments passed.
204:3 Invalid license file selected.
204:4 Operation successful.
204:5 Invalid product release.
204:6 CommNet Server license decoder failed.
204:7 CommNet Server has an invalid license key.
204:8 A CRC error has occurred.
204:9 An invalid license type has been detected.
204:10 An invalid license type operation has been detected.
204:11 There is no application data present.
204:12 A memory allocation error has occurred.
204:13 An invalid application type has been detected.
204:14 Invalid number of available licenses have been detected.
204:15 An invalid CommNet Server identification number (Machine ID) has been detected.
204:16 Registry creation (RegCreateKeyEx) failed.
204:17 Failed to set a value in the registry. (RegSetValueEx failed).
204:18 Failed to open the registry. (RegOpenKeyEx failed).
204:19 Failed to query the registry. (RegQueryValueEx failed).
204:20 The value of sQNSLRelConf key under CommNet does not match to QNSRELNUM=.
204:21 An invalid data type has been detected.
204:22 An invalid activation key code has been detected.
204:23 This license has already been applied. This is a Duplicate license.
204:24 A database read error has occurred.
204:25 The field we are looking for is not found in the license key.
204:26 CommNet Server License Release does match installed release.
204:27 CommNet Server license encoder failed.
204:28 A database update error has occurred.
204:29 An application is still in use by another client. Used licenses cannot be more than existing licenses during replace operation.
204:30 An attempt was made to delete more licenses than that exists for an application.
204:31 No data fetched in the result set for the query in the database.
204:32 Failed to get host name.
204:33 The CommNet Server license evaluation date has expired.
204:34 An invalid operation code has been detected.
204:35 The application license evaluation date has expired.
204:36 The CommNet Server license key is corrupted.
204:37 There are no licenses available for this application.
204:38 The application license update failed.
204:39 CommNet Server ID not found in the LicQsl table.
204:40 Failed to get the CommNet install directory from the registry.
204:41 CommVault
204:42 HP_NAS
204:43 HP_EXCH_NAS
204:44 HP
204:45 SUN MicroSystems
204:46 Dell - CowBoy
204:47 Dell - Express
204:48 Dell - Data Center
204:49 Dell - Classic
204:50 StorageTek
204:51 StoneFly
204:52 NEI
204:53 Hitachi
204:54 Failed to copy the HTML files during the OEM Upgrade/New install.
204:55 Invalid License Key Error: Invalid product id detected.
204:56 Invalid License Key Error: Invalid OEM id detected in the 25 character license key.
204:57 The config id passed represents that no config id check is needed.
204:58 Failed to find a particular character in the CommServe License field column.
204:59 Failed to read the xml file and get the license token map.
204:60 BULL
204:61 Failed to update the oem.properties file during the OEM Upgrade/New install.
204:62 CommVault OEM Eval Extension is being applied to non CommVault OEM Eval license. Please Confirm.
204:63 The old IP address in the license does not match the IP address of the earlier CommNet Server.

CommNet QSM

Code Description
207:1 Could not Open DLL [^1%S] necessary to communicate with QSMCell.
207:2 Could not execute entry point [^1%S] on DLL [^2%S].
207:3 Ok
207:4 Unknown Error.
207:5 API version mismatch.
207:6 Network error; check QSMCell interface name/port number and QSM services status.
207:7 CommNet Server could not connect to QSMCell. QNetNewLine Probable causes: QNetNewLine 1. QSMCell version is older than 5.9.0 QNetNewLine 2. Missing updates on CommNet Server and/or QSM Server QNetNewLine 3. CommNet Server cannot resolve QSMCell's interface name QNetNewLine 4. QSMCell GUI Server service is not currently running.
207:8 Combination of User/Password is wrong.
207:9 Failed due to insufficient user access privileges; ACL-s are not supported.
207:10 QSM Server registration information did not match current information on CommNet Server. Action fails.
207:11 QSM Server is already registered to another CommNet Server.
207:12 QSM Server cannot locate registry sections. QSM server is either an older incompatible version or QSM installation suspect.
207:13 QSM Server cannot update registry to store QSM registration information. Probably an older incompatible QSM server version or QSM installation is suspected.
207:14 QSM Server cannot locate any current registration info. Unregister request rejected.
207:15 QSM Server failed to retrieve QSM summary. QSM Summarizer job may never have been run, or such job failed to collect and warehouse the data.
207:16 QSM Server is currently busy. Please try again later.
207:17 QSMCell [<String>] on interface [^2%S] is already registered to CommNet Server [<String>:^4%S].QNetNewLine Would you like to switch QSMCell [<String>] to the current CommNet Server [<String>]?

CommNet Registration

Code Description
203:1 Failed to connect to CommCell [<String>] using interface name [^2%S]. QNetNewLine Probable causes: QNetNewLine 1. CommNet Agent software is not installed on CommCell QNetNewLine 2. CommCell version is older than 4.2.0 QNetNewLine 3. CommNet Server cannot resolve CommCell's interface name QNetNewLine 4. CommCell Services might not be running. QNetNewLine 5. If CommServe or CommNet Server are behind a firewall, you must install SQL Server iDataAgent on the CommNet Server in order to configure firewall settings.
203:2 Failed to send message to CommCell [<String>] using interface name [^2%S].
203:3 Failed to receive message from CommCell [<String>] using interface name [^2%S].
203:4 Failed to check if Registration was present on CommCell [<String>], Interface Name [^2%S].
203:5 CommCell [<String>] on interface [^2%S] is already registered to QNetNewLine CommNet Server [<String>:^4%S].QNetNewLine Would you like to switch CommCell [<String>] to the current CommNet Server [<String>]?
203:6 Failed to check if CommNet Agent software is compatible with CommCell [<String>-^2%S].
203:7 CommNet Agent Version [^1%S] is not compatible with CommCell [<String>] Version [^3%S].
203:8 Combination of User/Password for CommCell User [<String>] is wrong.
203:9 Wrong password provided for CommCell User [<String>].
203:10 Failed to check user rights for CommCell User [<String>] on CommCell [<String>].
203:11 CommCell User [<String>] has no Administrative capabilities on CommCell [<String>].
203:12 Failed to check if CommCell User [<String>] is enabled on CommCell [<String>].
203:13 CommCell User [<String>] is not enabled on CommCell [<String>].
203:14 Failed to check if CommCell [<String>:^2%S] is indeed registered with this CommNet Server.
203:15 CommCell [<String>:^2%S] is registered to another CommNet Server.
203:16 Failed to set Registration on CommCell [<String>], Interface Name [^2%S].
203:17 Failed to remove Registration on CommCell [<String>], Interface Name [^2%S].
203:18 Failed to modify Registration on CommCell [<String>], Interface Name [^2%S].
203:19 Failed to check if CommCell [<String>] has a non-CommVault OEM license.
203:20 CommCell [<String>] cannot register with CommNet since it has a non-CommVault OEM license.
203:21 CommNet Server is unreachable from CommCell on Interface Name [^1%S]. Please, specify a valid/reachable Interface Name for the CommNet Server.
203:22 CommNet Agent Version [^1%S] is not compatible with CommNet Server [<String>] Version [^3%S].
203:23 CommCell [<String>:^2%S] does not have any registration information. This could have been caused if the CommNet Agent software was re-installed on the CommServe. QNetNewLine Please, specify a CommCell administrator user and password if you want to re-register this CommCell.
203:24 Failed to get TimeZones list.
203:25 Failed to connect to CommCell [<String>] using interface name [^2%S]. QNetNewLine Probable causes: QNetNewLine 1. CommNet Agent software is not installed on CommCell QNetNewLine 2. CommCell version is older than 5.0.0 QNetNewLine 3. CommNet Server cannot resolve CommCell's interface name QNetNewLine 4. CommCell Services might not be running. QNetNewLine 5. If CommServe or CommNet Server is behind a firewall, you must install SQL Server iDataAgent on the CommNet Server in order to configure firewall settings.
203:26 Failed to connect to CommCell [<String>] using interface name [^2%S]. QNetNewLine Probable causes: QNetNewLine 1. CommNet Agent software is not installed on CommCell QNetNewLine 2. CommCell version is older than 5.9.0 QNetNewLine 3. CommNet Server cannot resolve CommCell's interface name QNetNewLine 4. CommCell Services might not be running. QNetNewLine 5. If CommServe or CommNet Server is behind a firewall, you must install SQL Server iDataAgent on the CommNet Server in order to configure firewall settings.
203:27 Failed to connect to CommCell [<String>] using interface name [^2%S]. QNetNewLine Probable causes: QNetNewLine 1. CommNet Agent software is not installed on CommCell QNetNewLine 2. CommCell version is older than 6.1.0 QNetNewLine 3. CommNet Server cannot resolve CommCell's interface name QNetNewLine 4. CommCell Services might not be running. QNetNewLine 5. If CommServe or CommNet Server is behind a firewall, you must install SQL Server iDataAgent on the CommNet Server in order to configure firewall settings.
203:28 Failed to check if CommCell [<String>] is registered with maximum allowed CommNet Servers.
203:29 CommCell [<String>] is already registered with maximum allowed CommNet Servers [<Number>].
203:30 Failed to connect to CommCell [<String>] using interface name [^2%S]. QNetNewLine Probable causes: QNetNewLine 1. CommNet Agent software is not installed on CommCell(required for pre 9.0 release) QNetNewLine 2. CommCell version is older than 7.0.0 QNetNewLine 3. CommNet Server cannot resolve CommCell's interface name QNetNewLine 4. CommCell Services might not be running. QNetNewLine 5. If CommServe or CommNet Server is behind a firewall, you must install SQL Server iDataAgent on the CommNet Server in order to configure firewall settings.
203:31 Failed to connect to CommCell [<String>] using interface name [^2%S]. QNetNewLine Probable causes: QNetNewLine 1. CommNet Agent software is not installed on CommCell(required for pre 9.0 release) QNetNewLine 2. CommCell version is older than 8.0.0 QNetNewLine 3. CommNet Server cannot resolve CommCell's interface name QNetNewLine 4. CommCell Services might not be running. QNetNewLine 5. If CommServe or CommNet Server is behind a firewall, you must install SQL Server iDataAgent on the CommNet Server in order to configure firewall settings.
203:32 Could not find Library [sLNCNCOMMCELL]. Please, make sure the CommNet Agent is installed properly.
203:33 Operation Manager is not installed. Please install Operation Manager then try registration again.

CommNet Scheduler

Code Description
205:1 Schedule [<String>] already exists.
205:2 Schedule [<String>] does not exists.
205:3 Could not encrypt password before storing it on the database.
205:4 Schedule [<String>] is currently Running. Modify action will not proceed. Try again later.
205:5 You have no rights to modify Schedule [<String>].
205:6 You have no rights to delete Schedule [<String>].
205:7 Could not get the Current State for Schedule [<String>]. Check CommNetServer.log for more information.
205:8 Change of Status from [^1%S] to [^2%S] is invalid.
205:9 Could not get Action Information for Schedule [<String>]. Check CommNetServer.log for more information.
205:10 Could not update Browser information for Schedule [<String>]. Check CommNetServer.log for more information.
205:11 On Demand
205:12 Could not unserialize XML object.
205:13 Could not serialize XML object.
205:14 Database Error. Check CommNetServer.log for more information.
205:15 Could not start transaction.
205:16 Could not set the Isolation Level on transaction.
205:17 Could not get CommNet ID from CommNet Database.
205:18 Could not convert Local Time to CommNet TimeZone.
205:19 Task Scheduler API - required API is not supported on this version of Windows.
205:20 Task Scheduler API - could not create new Task. Schedule Name [<String>] cannot contain special characters prohibited in a Windows File Name such as [*], [/], and [?]
205:21 Task Scheduler API - could not get flags from Task.
205:22 Task Scheduler API - could not set flags for Task.
205:23 Task Scheduler API - could not set account information for Task.
205:24 Task Scheduler API - could not create new Trigger for Task.
205:25 Task Scheduler API - could not get Trigger from Task.
205:26 Task Scheduler API - could not set trigger information for Task.
205:27 Task Scheduler API - could not save Task.
205:28 Task Scheduler API - could not run Schedule immediately.
205:29 Task Scheduler API - could not delete Schedule immediately.
205:30 General error.
205:31 Failed to generate report.
205:32 Failed to copy file to target directory. Target directory may be invalid.
205:33 Failed to spool e-mail notification.
205:34 Scheduler Activity was disabled.
205:35 Browser Report has been restarted in the middle of the schedule run. Check log files for more details.
205:36 Could not create History entry for Schedule [<String>]. Check CommNetServer.log for more information.
205:37 Schedule skipped. An attempt was already running for this Schedule.
205:38 Repeat Every

Common Event Messages

Code Description
72:1 Failed to get result from CreateIndex on MediaAgent. Please check if there is a network problem and that the services on the MediaAgent are running.
72:2 CreateIndex on MediaAgent returned an error. Please check the CreateIndex.log on MediaAgent for possible causes.
72:3 Cannot read acknowledgment from CreateIndex on MediaAgent. Please check the network connectivity and for possible problems with the CreateIndex process problem on the MediaAgent.
72:4 Error opening or reading the index file <String>, error code = <Number>. Please check the network connectivity and for possible problems with the CreateIndex process problem on the MediaAgent.
72:5 There is an error during launching CreateIndex. Possible causes: a) CreateIndex failure; please check CreateIndex.log file on MediaAgent [<String>]. b) Network problem between this machine and the MediaAgent.
72:6 CreateIndex on the MediaAgent timed out. Please check the network connectivity and ensure that the services on the MediaAgent are running.
72:7 The file [<String>] could not be created because of error code [<Number>]. Please check what the error code means and and the folder permission and ensure that there is enough disk space.
72:8 Unable to retrieve subclient content information from the CommServe. Please check network connectivity and ensure that the product's services are running on both client and CommServe.
72:9 Error obtaining the client host name. Please check the TCP/IP settings. If these are OK, check this product's registry keys - the reason may be a possibly corrupted installation.
72:10 Error obtaining CommServe name. Possibly corrupted install.
72:11 Cannot open registry key SOFTWARE\\CommVault Systems\\Galaxy\\Platform Information\\...\\iDataAgent on client <String>.
72:12 Could not open file <String> for reading, error=<Number>
72:13 Could not open file <String> for writing, error=<Number>
72:14 Error writing to the file [<String>], perhaps insufficient disk space?
72:15 Error reading from file [<String>].
72:16 Send index to MediaAgent failed. Check the network connectivity and CreateIndex logs on MediaAgent.
72:17 A problem occurred while trying to access, or inconsistent data was returned from the CommServe database. Please make sure that all the product's services are running, the iDataAgent properties are set up correctly, and the name resolution and network connectivity are working correctly. If the problem persists, please call the support hotline.
72:18 An error occurred. Please see the log files for more information.
72:19 An exception occurred. Please call the support hotline.
72:20 Failed to open directory [<String>]. Possible reasons: nonexistent path/file or hardware problems.
72:21 Process cannot continue as there is insufficient memory to continue the execution.
72:22 Backup will be executed with legacy APIs.
72:23 Pipeline is down. Cannot allocate buffer. Check MediaAgent and pipeline.
72:24 Unable to retrieve the iDataAgent properties. Please check if the product's services on the CommServe and on the CommClient are up. Restart all the services and try again.
72:25 User or CommServe Job Manager stopped the backup job.
72:26 Backup initialization failed. Check pipeline and MediaAgent.
72:27 Unable to login using user [<String>\\<String>]. Error code returned was [<Number>]. Please make sure that the user credentials are correct.
72:28 Received an unexpected message from the CommServe. Please make sure that all services are running.
72:29 The receive message operation has failed with the error [0x<HexNumber>]. The connection has been aborted!
72:30 Sending either the message header or the message itself failed. Please check if all services are up and that the network connection is working.
72:31 Error opening data source.
72:32 Restore was aborted.
72:33 Backup was aborted.
72:34 Error initializing the COM library.
72:35 Cannot get subclient configuration from server.
72:36 Cannot get working directory.
72:37 Out of disk space.
72:38 Cannot open registry key <String> on client [<String>].
72:39 MediaAgent network connectivity problem to iDataAgent.
72:40 Failed to open Archive File. The connectivity between client and MediaAgent may be broken OR an invalid copy precedence may have been specified.
72:41 Archive file cannot be opened. Possible causes: services down on CommServe, lost network connectivity to CommServe.
72:42 Unknown status.
72:43 Directory [<String>] is in use.
72:44 Could not create directory [<String>].
72:45 CommServe was unable to connect over the network to MediaAgent [<String>] - the problem may be either with network connectivity or that this product's services are down.
72:46 Could not determine full path for [<String>].
72:47 Error impersonating user. Please verify that the username and password are correct.
72:48 Failed to get destination client host name.
72:49 Failed to set up connection to destination client [<String>].
72:50 Quit Message received from Job Manager.
72:51 Error notifying Job Manager of successful completion.
72:52 Error notifying Job Manager of failure.
72:53 Not enough space on the disk at [<String>] ; available [<Number>] MB , required [<Number>] MB.
72:54 <String>
72:55 [<String>] exceeds threshold of [<Number>] MB. The space usage is [<Number>] MB.
72:56 [<String>] does not have the required minimum space of [<Number>] MB and exceeded the threshold of [<Number>] MB. Space available: [<Number>] MB. Space usage: [<Number>] MB.
72:57 [<String>] does not have required minimum space of [<Number>] MB. The space available is [<Number>] MB.
72:58 Unable to commit database transaction. Please try again, and if the problem persists, please contact your software vendor.
72:59 The operation could not be completed as obsoleted code was encountered during the execution. Please contact your software vendor.
72:60 NAS updates :
72:61 NDMP updates :
72:62 WA Driver updates :
72:63 Copy Manager updates :
72:64 Base updates :
72:65 iDataAgent updates :
72:66 Informix iDataAgent updates :
72:67 Oracle iDataAgent updates :
72:68 SAP for Oracle updates :
72:69 Quick Recovery Agent updates :
72:71 File Archiver updates :
72:72 Lotus Notes Database updates :
72:73 DB2 updates :
72:74 Sybase updates :
72:75 UNIX Image Level updates :
72:76 1-Touch updates :
72:77 Service Pack :
72:78 Additional updates :
72:79 Missing updates :
72:80 No updates
72:81 None
72:82 Apple Macintosh updates :
72:83 FreeBSD updates :
72:84 HP-UX File System updates :
72:85 Linux File System updates :
72:86 Tru64 File System updates :
72:87 SGI File System updates :
72:88 Solaris File System updates :
72:89 Data Classification volumes are running at [<Number>] percent of capacity. Data classification will not function when the volume runs out of space.
72:90 The QR Snap Cache [<String>] is running at [<Number>] percent of the volume space. Quick Recovery will stop functioning when this volume runs out of space.
72:91 Overwritten
72:92 Restored
72:93 Older
72:94 Failed
72:95 Filtered by map
72:96 Appended
72:97 Skipped
72:98 Not mapped
72:99 Pending
72:100 Bad media
72:101 Some volumes on this machine are running at [<Number>] percent of capacity. Recovery points that have been saved on this machine could be compromised or its behavior could become unpredictable.
72:102 The index location [<String>] used by the Content Indexing server is reaching [<Number>] percent of the disk capacity.
72:103 The disk used to store the index on the Content Indexing server is running at [<Number>] percent of capacity. Please add more disk space to prevent failures during Content Indexing operations.
72:104 The index location [<String>] used by the Content Indexing server does not have required minimum space of [<Number>] GB. Space available is [<Number>] MB.
72:105 The disk used to store the index on the Content Indexing server does not have required minimum space of [<Number>] GB. Please add more disk space to prevent failures during search or indexing operations.
72:106 <String>
72:107 Locked
72:108 Needs reboot
72:109 Failed to set the ACLs. ACL support is not available on destination machine/filesystem or incompatible with backup data.
72:110 The cache location [<String>] used by the Content Store is reaching [<Number>] percent of the disk capacity.
72:111 The cache location [<String>] used by the Content Store does not have required minimum space of [<Number>] GB. Space available is [<Number>] MB.
72:112 The disk used to store the cached files on the Content Store is running at [<Number>] percent of capacity. Please add more disk space to prevent failures during Content Store operations.
72:113 The disk used to store the cached files on the Content Store does not have required minimum space of [<Number>] GB. Please add more disk space to prevent failures during Content Store operations.
72:114 Failed to initialize External data connector.
72:115 Failed to run job phase through External data connector layer.
72:116 Failed to fetch the resource list from External data connector layer.
72:117 Failed to find log file resources in External data connector's resource list.
72:118 Failed to extract information of MIME data in External data connector layer.
72:119 Failed to fetch handshake data from External data connector.
72:120 Failed to backup using 'mining database'.
72:121 User exceeded allowed Virtual machine Quota using this Allocation policy <String>. Use another Allocation Policy or contact the Administrator.
72:122 Disk space requested exceeds maximum disk space allowed by the Allocation policy [<String>].
72:123 Total disks requested exceeds maximum disks allowed by the Allocation policy [<String>].
72:124 Total NICS requested exceeds maximum NICS allowed by the Allocation policy [<String>].
72:125 Total memory requested exceeds maximum memory allowed by the Allocation policy [<String>].
72:126 None of the Host servers configured in the Allocation policy [<String>] can be selected for creating virtual machine. Verify that there is enough disk space available on the Data stores connected to the hosts.
72:127 Database Error [<String>] occurred while selecting best ESX Server and Datastore from the Allocation Policy [<String>].
72:128 User is not a member of the Allocation Policy [<String>]. Use another Allocation Policy.
72:129 Phase 1: Provisioning of Virtual Machine [<String>] is successful, Phase 2: 1-Touch Recovery started
72:130 User has exceeded allowed Virtual Machine Quota.
72:131 Maximum allowed length of virtual machine name is 15 characters. Use a smaller name.
72:132 Failed to open directory [<String>]. Unable to log in using user [<String>\\<String>]. Please make sure the user credentials are correct.
72:133 User exceeded allowed number of snapshots for this Virtual Machine using this Allocation Policy. Please use another Allocation Policy with higher limits.
72:134 Failed to access path [<String>]. No logon servers are available. Check network connectivity to the device and health of any domain controller.
72:135 Verified
72:136 Requested disk size exceeds available space on all datastores
72:137 Conflict
72:138 A VM with same name already exists. Please retry with a different name.
72:139 The number of CPU(s) requested exceeds maximum allowed by the Allocation policy [<String>].
72:140 None of the Host servers configured in the Allocation policy [<String>] can be selected for creating virtual machine. Verify that there is enough memory available on the hosts.
72:141 Commserver failed to connect to Enterprise Metrics Reporting Server to download scripts.Access the download URL from the explorer and verify.
72:142 Commserver failed to process Enterprise Metrics Reporting Server scripts.
72:143 Commserver failed to upload data to Enterprise Metrics Reporting Server.In case HTTP Proxy is configured, Update HTTP Proxy details in Control Panel -> E-Mail & Web Server Configuration -> Internet Gateway.
72:144 Commserver failed to connect to Cloud Reporting Server to download scripts.Access the download URL from the explorer and verify.
72:145 Commserver failed to process Cloud Metrics Reporting Server scripts.
72:146 Commserver failed to upload data to Cloud Metrics Reporting Server. In case HTTP Proxy is configured, Update HTTP Proxy details in Control Panel -> E-Mail & Web Server Configuration -> Internet Gateway.
72:147 Commserver failed to download the remote troubleshooting request configuration from the Cloud Metrics Reporting Server.
72:148 Commserver failed to submit sendlogs job for the remote troubleshooting request.
72:149 Submitted sendlogs job id[<Number>] for remote troubleshooting request id [<Number>].
72:150 Request exceeds maximum limit configured in Live Mount policy.

CommServe License Manager

Code Description
1:1 Invalid arguments.
1:2 An application is still in use by another client.
1:3 An invalid application type have been detected.
1:4 An invalid number of clients has been detected.
1:5 An invalid platform type has been detected.
1:6 The CommServe has an invalid license key.
1:7 The CommServe has an out-of-date license key.
1:8 A database connection error has occurred.
1:9 A database update error has occurred.
1:10 A database read error has occurred.
1:11 A memory allocation error has occurred.
1:12 The CommServe license key is corrupted.
1:13 An invalid operation code has been detected.
1:14 An invalid data type has been detected.
1:15 An invalid product release has been detected.
1:16 There is no application data present.
1:17 There is no license key information present.
1:18 There is no library control program application present.
1:19 There is no MediaAgent present in the license.
1:20 Failed to encrypt the data. Please contact your software provider.
1:21 An invalid CommServe identification number has been detected.
1:22 An invalid CommCell identification number has been detected.
1:23 An application that cannot be an evaluation copy has been detected.
1:24 The CommServe license decoder failed.
1:25 An invalid license type has been detected.
1:26 An invalid license type operation has been detected.
1:27 There is no Archive Server Application present.
1:28 A CRC error has occurred.
1:29 An expired CommServe license key has been detected.
1:30 An invalid License File has been detected.
1:31 Server applications not allowed in license add type.
1:32 Evaluation CommServe is not allowed for the license type.
1:33 Application data is not allowed for the license type.
1:34 The creation of the release configuration file failed.
1:35 The reading of the release configuration file failed.
1:36 A CommServe license structure is required.
1:37 There are no licenses available for this application.
1:38 The application license update failed.
1:39 The application license evaluation date has expired.
1:40 The CommServe license evaluation date has expired.
1:41 The evaluation day argument cannot be NULL.
1:42 Invalid application data has been detected.
1:43 An invalid activation key code has been detected.
1:44 License administrator invoked.
1:45 License administrator failed.
1:46 License administrator succeeded.
1:47 CommCell name found but with different CommCell ID in CommCell table.
1:48 Warning: CommCell ID found but with a different CommCell name in CommCell table.
1:49 CommCell ID not found in CommCell table.
1:50 CommCell ID not found in CommCell table.
1:51 CommServe client ID not found in Client table.
1:52 CommServe client not found in Platform table.
1:53 Unknown license application [<Number>].
1:54 License application type not found.
1:55 CommServe license validated!
1:56 MediaAgent license validated!
1:57 Either unable to contact CommServe for License Validation or MediaAgent license has expired!
1:58 Application Name: <String>
1:59 The new license contains more MediaAgents than LCPs
1:60 Duplicate CommServe Storage Manager license key!
1:61 Success!
1:62 A memory allocation error has occurred.
1:63 \nUsage: <String> -A T:NOC [-A T:NOC] -P OS -I Machid [-O OEMName -o OEMLicenseType] -C CSid -L Lictype -R Relnum [-E T:NOC [-E T:NOC] -e -F LicFile]\n\n
1:64 Invalid license parameter.\n
1:65 Invalid platform parameter.\n
1:66 Invalid release parameter.\n
1:67 Invalid application parameter.\n
1:68 Invalid application type.\n
1:69 Invalid OEM Id.\n
1:70 A server application cannot be an evaluation copy.\n
1:71 An invalid number of applications clients.\n
1:72 An invalid machine ID parameter.\n
1:73 An invalid CommCell ID parameter.\n
1:74 An invalid OEM license type parameter.\n
1:75 A missing argument.\n
1:76 A required argument missing.\n
1:77 An invalid option.\n
1:78 \nError:
1:79 \n\n\nLicense Key valid on <String>\n
1:80 License key expires if not used by <String>\n
1:81 \t\tCommServe Storage Manager Evaluation Configuration\n\n
1:82 \t\tCommServe Storage Manager Configuration\n\n
1:83 CommServe ID = <HexNumber>\n
1:84 \nOEM ID = <Number>\n
1:85 \nOEM License Type = <Number>\n
1:86 \nCommCell ID = <HexNumber>\n
1:87 \nPlatform Type = <String>\n
1:88 \nCommServe Release = <Number>.x\n
1:89 \nLicense Type = <String>\n
1:90 Application name
1:91 Number of clients
1:92 CommServe Storage Manager Install
1:93 iDataAgent upgrade
1:94 iDataAgent Addition
1:95 CommServe Storage Manager Release Upgrade
1:96 CommServe Storage Manager OEM Upgrade
1:97 iDataAgent Deletion
1:98 Sun Solaris
1:99 Hewlett Packard HP-UX
1:100 Microsoft Windows
1:101 Evaluation
1:102 \nActivation Key = <HexNumber>\n
1:103 +###################### WARNING #######################
1:104 An evaluation CommServe upgrade license may be\n
1:105 rejected during activation if the installed CommServe\n
1:106 is NOT an evaluation copy.\n\n
1:107 IF THIS IS AN ERROR, PLEASE RE-GENERATE THIS LICENSE KEY!
1:108 \nUsage: <String> -L Lic | -F Licfile -VM virtualMachine \n\n
1:109 \nPlease write down the activation key code ===>[<HexNumber>]<=== maybe required by technical support \n
1:110 License activator invoked.
1:111 License activator failed.
1:112 License activator succeeded.
1:113 \nUsage: <String> -R CVRel -L Lic | -F Licfile -VM virtualMachine \n\n
1:114 -F and -L options are incompatible.\n
1:115 Incompatible product and license releases.\n
1:116 License installer invoked.
1:117 License installer failed.
1:118 License installer succeeded.
1:119 \nApplication: <String>\n Max [<Number>] \tConfigured [<Number>]
1:120 \tALERT\n
1:121 Evaluation expiration date: <String>\n
1:122 CommServe expiration date: <String>\n
1:123 Number applications: <Number>\n
1:124 \nLicense: <String>\n
1:125 CommServe Release: <String>\n
1:126 License install date: <String>\n
1:127 CommServe ID: 0x<HexNumber>\n
1:128 OEM ID: <Number>\n
1:129 OEM License Type: <Number>\n
1:130 CommCell ID: 0x<HexNumber>\n
1:131 License reader invoked.
1:132 License reader failed.
1:133 License reader succeeded.
1:134 Failed to set CommCell ID.
1:135 Failed to setup activity control data.
1:136 Activation Key: <HexNumber>\n
1:137 CommServe Storage Manager License Only Update
1:138 Invalid OEM information.
1:139 Duplicate application data in license key.
1:140 CommServe Storage Manager Id Change
1:141 \nNew CommServe ID = <HexNumber>\n
1:142 CommServe License Release does NOT match the installed release!
1:143 An attempt was made to delete more licenses than exist for an application
1:144 You do not have a license to perform data encryption.
1:145 Unable to verify data encryption license.
1:146 You are using an evaluation encryption license with only <Number> days left.
1:147 You do not have a license to perform CommCell Migration.
1:148 Unable to verify CommCell Migration license.
1:149 You are using an evaluation CommCell Migration license with only <Number> days left.
1:150 You cannot convert a permanent license to an evaluation license.
1:151 The first license to use should always be a license of type NEW and cannot be Replace or anything else.
1:152 Once a CommServe is activated with a license, a license of type New cannot be used again.
1:153 A CommCell level license de-configure failed.
1:154 License activation failed.
1:155 License activation failed. <String> The number of licenses given for a License type should be at least equal <String> to the number of licenses used in the CommServe.
1:156 The following Agents do not have enough licenses given.
1:157 [<String>] Permanent Licenses: Issued [<Number>] Consumed [<Number>]
1:158 License activation failed.<String> Invalid machine ID detected in the license.
1:159 The license being activated is for CommServe with IP address [<String>] <String> and the CommServe is of IP address [<String>].
1:160 License activation failed.<String> Invalid CommCell ID detected in the license.
1:161 The license being activated is for CommCell ID [<Number>] and the current CommServe is of CommCell ID [<Number>].
1:162 License activation failed.<String> Invalid CommServe release detected in the license.
1:163 Release number in license file is not valid for this CommCell. The license file you selected is for release [<String>], but the current CommCell license is for release [<String>].
1:164 License activation failed.<String> The license file [<String>] is not a valid license file or could not be read.
1:165 License activation failed.<String> Could not get the version from registry or the version is invalid.
1:166 Failed to update the counter table.
1:167 Server File System
1:168 Laptop and Desktop
1:169 Application Class 1
1:170 iDataAgent for Lotus Notes Database on MS Windows
1:171 iDataAgent for Lotus Notes Document on Unix
1:172 Application Class 1
1:173 Application Class 1
1:174 iDataAgent for Exchange Mailbox
1:175 Application Class 1
1:176 Library Control Module
1:177 MediaAgent
1:178 MediaAgent
1:179 MediaAgent
1:180 MediaAgent
1:181 MediaAgent
1:182 Application Class 3
1:183 Application Class 2
1:184 Application Class 1
1:185 Application Class 2
1:186 iDataAgent for Sun Solaris File System on Intel
1:187 Server File System
1:188 Server File System
1:189 Server File System
1:190 Application Class 1
1:191 NAS Client
1:192 Shared Storage License
1:193 iDataAgent for Hewlett Packard HP-UX 64bit File System
1:194 iDataAgent for Sun Solaris 64bit File System
1:195 Server File System
1:196 Server File System
1:197 Application Class 2
1:198 Application Class 1
1:199 NAS Client
1:200 iDataAgent for EMC IP4700 NAS
1:201 NAS Client
1:202 MediaAgent for Unix
1:203 iDataAgent for ProxyHost on MS Windows
1:204 iDataAgent for Fastrax Exchange Database
1:205 iDataAgent for EMC Fastrax Exchange Mailbox
1:206 iDataAgent for Fastrax Exchange 2000 Database
1:207 iDataAgent for EMC Fastrax Exchange 2000 Mailbox
1:208 iDataAgent for EMC Fastrax Windows 2000 File System
1:209 iDataAgent for MS SharePoint Database v1
1:211 Server File System
1:212 iDataAgent for MS Exchange Public Folder/Web Folder
1:213 NAS Client
1:214 NRS Client
1:215 iDataAgent for ProxyHost on Unix
1:216 Application Class 1
1:217 Software Copy Manager
1:218 EZ Browse
1:219 MediaAgent
1:220 Application Class 3
1:221 iDataAgent for MS SharePoint Document v1
1:222 Quick Recovery Agent for MS Windows
1:223 Quick Recovery Agent for Unix
1:224 iDataAgent for IMAN
1:225 NRS Client
1:226 QSnap on MS Windows
1:228 Application Class 2
1:229 File System Archiving
1:230 Application Class 3
1:231 iDataAgent for NAS Restore Enabler
1:232 QR Enabler for ISSG
1:233 QR Enabler for SnapView
1:234 QR Enabler for Windows Volume Shadow Service
1:235 CommCell SNMP Enabler
1:236 QSnap on Unix
1:237 Centera Mount Path
1:238 MediaAgent
1:239 Application Class 1
1:240 CommCell Explorer
1:241 Hardware Copy Manager
1:242 Server File System
1:243 Server File System
1:244 iDataAgent for Image Level on Windows
1:245 Application Class 3
1:246 Offline Content Indexing Connector
1:247 QR Enabler for Echo View
1:248 VaultTracker Enterprise
1:249 File System Archiving
1:250 Disk Library Connector (DDO)
1:251 Data Encryption
1:252 Data Verification
1:253 Data Multiplexing
1:254 CommCell Migration
1:255 Application Class 3
1:256 WORM Media Support
1:257 GridStore
1:258 Application Class 1
1:259 Application Class 1
1:260 iDataAgent for Recovery Directory
1:261 File System Archiving
1:262 QR Enabler for OSSV
1:263 Server File System
1:264 iDataAgent for Image Level on Unix
1:265 iDataAgent for ProxyHost for Image Level on Windows
1:266 iDataAgent for ProxyHost for Image Level on Unix
1:267 QR Enabler for ONTAP
1:268 CommClient Base
1:269 CommServe Storage Manager
1:270 MediaAgent
1:271 NAS MediaAgent Client Software
1:272 License activation failed.<String> Duplicate license key detected.
1:273 The license you are trying to apply is of type [<String>]. When installing a fresh CommServe, only a license of type NEW can be used.
1:274 Cannot change the OEM type of the CommServe from [<String>] to [<String>]. Only OEM upgrades are allowed.
1:275 Once a CommServe is installed, a license of type New cannot be used again.
1:276 Invalid operation. Cannot convert a permanent CommServe to an Evaluation CommServe.
1:277 The platform type in the license has to be 'Evaluation' since this is an Evaluation CommServe.
1:278 The platform type in the license should not be 'Evaluation' since this is a permanent CommServe.
1:279 License activation failed.<String> OEM Upgrade license type can only be applied to an Evaluation CommServe.
1:280 License activation failed with DB error [<String>]; failed to update the license table.
1:281 License activation failed.<String> There is no license of type [<String>] in the database currently to be deleted.
1:282 License activation failed.<String> There is a license of type [<String>] already present in the database and cannot be added again.
1:283 License activation failed.<String> This license of type [<String>] in the database is not 'evaluation' and cannot be made evaluation now.
1:284 DB error; failed to update the license list table.
1:285 License activation failed with DB error [<String>]; failed to update the license list table.
1:286 License activation failed with DB error [<String>]; failed to delete the license list table.
1:287 License activation failed.<String> DB Error. Could not get the CommCell information.
1:288 DB Error. Could not get the client table information.
1:289 DB Error; failed to insert into license key table.
1:290 DB Error. Failed to update the CommCell table.
1:291 DB Error. Failed to insert into CommCell table.
1:292 DB Error. Failed to insert into client table.
1:293 DB Error. Failed to insert into platform table.
1:294 DB Error. Failed to insert into simclientapplication table.
1:295 DB Error. Failed to get the CommCell ID from the registry.
1:296 Failed to configure one of the CommCell level licenses in the database.
1:297 App manager error: Failed to create the appId. Error : [<String>]
1:298 App manager error: Failed to get the network hostname for the CommServe. Error : [<String>]
1:299 Job manager error: Failed to populate the activity control tables.
1:300 License activation failed.<String> Failed to log on the user with the supplied credentials.
1:301 License activation failed.<String> Failed to impersonate the logged on user.
1:302 Failed to get the product's install directory from the registry.
1:303 The old IP address in the license [<String>] does not match the IP address of the earlier CommServe [<String>].
1:304 License activation failed.<String> The OEM type in the license [<String>] does not match the OEM type [<String>] in the database.<String> OEM types can be changed only by activating a OEM Upgrade license and not [<String>] license.
1:305 Failed to copy the HTML files during the OEM Upgrade/New install.
1:306 Failed to set the OEM-specific properties in the database.
1:307 DB Error. Failed to get the CommCell operating mode info from the CommCell table.
1:308 DB Error; failed to get the license key record from the database.
1:309 DB Error. Failed to update a record in the CommServe database.
1:310 Disaster Recovery Machine ID not present in the CommServe license key.
1:311 1-Touch Server For Unix
1:312 Application Class 3
1:313 Application Class 3
1:314 Content Addressed Storage
1:315 Optical Media Support
1:316 Optical Media Support
1:317 CommCell Readiness Check
1:318 Advanced File System iDA Options
1:319 1-Touch Server for MS Windows
1:320 Erase Data
1:321 Client Groups
1:322 Disk Mount Path Sharing
1:323 iDataAgent for Linux File System on s390 Mainframe
1:324 iDataAgent for Linux File System on Itanium
1:325 Advanced Copy Features
1:326 Advanced Media Management Features
1:327 iDataAgent for MS SharePoint Document
1:328 NAS Client
1:329 License activation successful.
1:330 Failed to get the IP list.
1:331 This license key has already been applied on this CommServe. The same license file cannot be applied again.
1:332 The IP Address in the database <String> does not match the IP address(es) of CommServe <String>.
1:333 Failed to open the license file [<String>] for reading. An invalid License File has been detected.
1:334 The word [KEY:] was not found in the license file [<String>]. An invalid License File has been detected.
1:335 The word [CommVault License END:] was not found in the license file [<String>]. An invalid License File has been detected.
1:336 Failed to read product release version from the CommServe registry.
1:337 The CommServe registry does not contain a valid tag.
1:338 The CommServe registry contains an invalid release number in it.
1:339 The platform type of the CommServe [<Number>] does not match the platform type in the license key [<Number>].
1:340 The IP address in the license file [<String>] does not match any of the IP addresses of this CommServe [<String>]. Please obtain an IP Address Change license from your software provider.
1:341 Failed to read the registry for client name and client host names.
1:342 Failed to get the simsystem OS ID from the database for the CommServe.
1:343 DB Error. Failed to update the CommCell operating mode information in the CommCell table.
1:344 The directory [<String>] does not exist. Failed to copy the HTML files during the OEM Upgrade/New install.
1:345 No Default_*.htm* files found under the directory [<String>].
1:346 Failed to copy [<String>] to [<String>]. Reason: [<String>].
1:347 Failed to find the next default_*.htm* file. Reason: [<String>].
1:348 The parameter passed in release [<String>] is not valid. Invalid release parameter detected.
1:349 iDataAgent for EMC Centera NAS
1:350 iDataAgent for Oracle RAC
1:351 DataArchiver for MS Exchange Public Folder
1:352 File System Archiving
1:353 ContinuousDataReplicator for MS Windows
1:354 Data Classification Enabler
1:355 VaultTracker
1:356 Libraries
1:357 Drives
1:358 Slots
1:359 The license type [<Number>] is not a valid license type. An invalid application type has been detected.
1:360 There are no free licenses available for [<String>]. Please obtain a new license file with additional licenses from your software provider.
1:361 The application license evaluation date has expired for [<String>].
1:362 Database Error. Failed to update the license list table for license type [<Number>].
1:363 Database error; failed to get the license type for ClientId [<Number>] and Apptype [<Number>].
1:364 This license [<String>] is not a CommCell level license. Call a different function for this verification.
1:365 CommVault
1:366 HP_NAS
1:367 HP-UX_EXCH_NAS
1:368 HP-UX
1:369 Sun Microsystems
1:370 Dell Galaxy Server
1:371 Dell Galaxy Server Pro
1:372 Dell - Data Center
1:373 DELL Galaxy Enterprise
1:374 StorageTek
1:375 StoneFly Backup Express
1:376 NEI
1:377 Hitachi Data Protection Suite
1:378 Failed to find a particular character in the license key.
1:379 Failed to find an entry in the client table for the CommServe. The host name of the client does not match.
1:380 This license is not available.
1:381 CommCell ID in the license key [<Number>] does not match the CommCell ID [<Number>] found in the CommCell table for CommCell [<String>].
1:382 Failed to find an entry in the CommCell table for the CommCell name [<String>]. Please contact your software provider.
1:383 De-Configuring the CommCell level feature [<String>] failed.
1:384 Failed to encode the license type [<Number>].
1:385 Database error; failed to insert a record into license list table.
1:386 Database error; failed to insert a record into license list table for license type [<Number>].
1:387 Database error; failed to update a record in license list table.
1:388 Database error; failed to update a record in license list table for license type [<Number>].
1:389 Database error; failed to delete a record from license list table.
1:390 Database error; failed to delete a record from license list table for license type [<Number>].
1:391 DB Error. Inserting default entries in client, CommCell, platform and simclientapps due to failed CommServe installation.
1:392 Failed to consume the CommCell level license [<String>] on the CommServe. Please contact your software provider.
1:393 Failed to get license information from the passed in license file/key.
1:394 The license is not available.
1:395 The license [<String>] has expired. Expiration date is [<String>].
1:396 The license [<String>] is not in the installed state on client [<String>].
1:397 No record found in Lic_Usage table for license type [<Number>] and client ID [<Number>].
1:398 No record found in license key table for CommServe.
1:399 There are not enough free tokens to continue the install for license [<String>] on this CommServe.
1:400 There are not enough free tokens available on this CommServe. Tokens needed : [<Number>] and Tokens free : [<Number>]
1:401 There are not enough free tokens available on this CommServe.
1:402 No record found in the database.
1:403 No record found in license type and apptype map table for license type [<Number>].
1:404 No record found in license type and apptype map table.
1:405 More than one application type found for license type [<Number>] in license type and apptype map table; number of application types found = [<Number>]
1:406 More than one application type found for a license type in license type and apptype map table.
1:407 Failed to get the OEM ID of the CommServe.
1:408 There are already [<Number>] licenses of type [<Number>] installed on this CommServe with OEM ID[<Number>]. No more installs of this license type [<Number>] allowed.
1:409 This CommServe has reached the maximum number of clients that can be protected. Please contact Customer Support.
1:410 The configuration ID passed represents that no configuration ID check is needed.
1:411 License upgrade from prior scheme to new licensing scheme failed.
1:412 Failed to generate a license.
1:413 The install date is in the future. This is not allowed.
1:414 The installation date for license [<String>] on client [<String>] is a future date [<String>]. Today's date is [<String>]. This is not allowed.
1:415 Failed to check for free tokens available on the CommServe.
1:416 Database Error: Failed to get the drive pool info from drive pool ID.
1:417 Database Error: Failed to get the drive pool info from drive pool ID[<Number>].
1:418 Database Error: Failed to get the library name from library ID.
1:419 Database Error: Failed to get the library name from library ID [<Number>].
1:420 Database Error: Failed to insert row into table [<String>].
1:421 Database Error: Failed to insert row into User Preference table.
1:422 Invalid License Key Error: Invalid product ID detected.
1:423 Invalid License Key Error: Invalid OEM ID detected in the 25-character license key.
1:424 Failed to convert evaluation licenses to permanent. There are no free permanent licenses to convert.
1:425 Database Error: Failed to get the license usage counts from the CommServe database.
1:426 Failed to convert the token number to base 35 string(5 character string).
1:427 Failed to generate an IP address change license.
1:428 You cannot update a license that was generated prior to the license that is already applied on this CommServe.
1:429 The current license being applied was generated on [<String>] but the license already applied on this CommServe was generated on [<String>]. Only licenses generated later than all licenses applied can be updated.
1:430 Database error; failed to update a record in Notification Rule table.
1:431 Cluster Group
1:432 Recovery Points
1:433 Database Error. Failed to get the Expiry Date information of the evaluation installations from the CommServe database.
1:434 File System Configuration
1:435 SQL Server Configuration
1:436 Exchange Configuration
1:437 Lotus Notes Configuration
1:438 SharePoint Configuration
1:439 Oracle Configuration
1:440 [<String>] Evaluation Licenses: Issued [<Number>] Consumed [<Number>]. At least # of permanent licenses issued should be equal to consumed evaluation licenses.
1:441 Failed to extend the evaluation period for all evaluation license installs.
1:442 OEM Upgrade cannot continue. The issued license file does not have all the licenses issued to accommodate all the licenses installed.
1:443 No record found in database for client id [<Number>] and license type [<Number>].
1:444 No record found in database table for client id [<Number>] and application type [<Number>].
1:445 The license issued has [<Number>] permanent tokens. But tokens consumed is [<Number>]. Permanent tokens issued should be at least equal to consumed tokens.
1:446 Permanent tokens issued is less than consumed. Cannot continue the license update.
1:447 The license count cannot be fixed. Either there are no more licenses to free or all licenses are consumed.
1:448 Version of the server (for the license key that is being applied) does not support one or more currently configured license types. Either uninstall these license types or contact your account representative to obtain appropriate license key
1:449 Version of the server (for the license key that is being applied) does not support one or more currently configured license types. Either uninstall these license types or contact your account representative to obtain appropriate license key
1:450 Version of the server (for the license key that is being applied) does not support one or more currently configured license types, config [<String>]. Either uninstall these license types or contact your account representative to obtain appropriate license key
1:451 Version of the server (for the license key that is being applied) does not support one or more currently configured license types, config [<String>]. Either uninstall these license types or contact your account representative to obtain appropriate license key
1:452 Replication Configuration
1:453 License is in un-installed state. Check license logs.
1:454 The required license has expired.
1:455 DataArchiver for MS SharePoint
1:456 Application Class 3
1:457 Application Class 1
1:458 De-Duplication SIS Enabler
1:459 ContinuousDataReplicator for Unix
1:460 Content Indexing Node
1:461 Content Indexing Client
1:462 NetApp Express
1:463 CommVault Express
1:464 NetApp Snapshot Enabler
1:465 Web Search Server
1:466 Directory Service Integration
1:467 BULL Data Protection Suite
1:468 Auxiliary Copy Encryption
1:469 SQL BackTrack OBSI
1:470 Compliance Search
1:471 SharePoint Search Connector
1:472 Virtual Server
1:473 MS Outlook Web Access Proxy
1:474 Legal Hold
1:475 SRM for File System
1:476 SRM for Applications
1:477 SRM for Applications
1:478 SRM for File System
1:479 SRM for File System
1:480 SRM for File System
1:481 SRM for Applications
1:482 SRM for SharePoint
1:483 SRM Services
1:484 Failed to update the database.
1:485 DB2 DPF
1:486 Online Content Indexing Connector
1:487 Application Class 1
1:488 Workstation Backup
1:489 Exchange Offline DB Mining Administrative Tool
1:490 Offline Mining Enabler
1:491 Virtual Server
1:492 Offline Mining Enabler
1:493 Application Class 1
1:494 Hardware Snapshot Enabler
1:495 Automated content classification
1:496 Data Tagging
1:497 ERM Connector
1:498 Offline Mining Enabler
1:499 An evaluation extension license OEM should match the OEM type of the CommServe
1:500 De-Duplication Block Level
1:501 De-Duplication to Tape
1:502 Free License
1:503 The license file contains non-express Cell Licenses [%s] for Express CommServe.
1:504 Reporting Server
1:505 Client Count
1:506 CommNet Explorer
1:507 Advanced Reporting
1:508 CommNet SNMP Enabler
1:509 DataArchiver for Lotus Notes Document for UNIX
1:510 Index Cache Server
1:511 Application Class 1
1:512 Object Link
1:513 Sybase IQ
1:514 Foreign Data Discovery Agent
1:515 SRM for Applications
1:516 SRM for Lotus Notes
1:517 Application Class 1
1:518 External Data Connector
1:519 File Level Enabler for SRM
1:520 Sharepoint Online Search Connector
1:521 Library Sharing Across CommCells
1:522 Object Store
1:523 Cloud Storage
1:524 SAP ArchiveLink
1:525 Agentless Data Collection for SRM
1:526 Documentum for UNIX
1:527 Subscription Based Cloud Storage
1:528 Available license check failed.
1:529 This license [<String>] is not available at this time.
1:530 The <String> license [<String>] is not available.
1:531 Data Protection Core infrastructure
1:532 Data Protection Enterprise infrastructure
1:533 Data Archive Core infrastructure
1:534 Data Archive Enterprise infrastructure
1:535 Eval capacity license [<String>] cannot be added when permanent once already exists.
1:536 NetApp Snap Management
1:537 NetApp Cloud
1:538 Remote Operation Management Service
1:539 Search Server
1:540 Advanced document
1:541 Linguistic
1:542 Dell Snap Management
1:543 Virtual Machines
1:544 Protected Mailboxes
1:545 Archived Mailboxes
1:546 Content indexed Mailboxes
1:547 Disk Library Space (TB)
1:548 Deduplication Active Store Capacity
1:549 Content Indexing Advanced Linguistic Support
1:550 NetApp Disk Library
1:551 Content Indexed Objects (In Millions)
1:552 Failed to read the existing license type [<String>] from the CommServe. Please contact your software provider.
1:553 Failed to decrypt license key from the license file. Please contact your software provider.
1:554 The active licensed IP address [<String>] does not match any of the IP addresses of this CommServe [<String>]. Please obtain an IP Address Change license from your software provider.
1:555 The active licensed IP address [<String>] does not match any of the IP addresses of this CommServe [<String>]. Please obtain an IP Address Change license from your software provider.
1:556 The original licensed IP address [<String>] does not match any of the IP addresses of this CommServe [<String>].
1:557 The number of new permanent licenses of license type [<String>] is [<String>], which is less than the number currently in use [<String>]. Please obtain a sufficient number of new licenses.
1:558 The number of new evaluation licenses of license type [<String>] is [<String>], which is less than the number currently in use [<String>]. Please obtain a sufficient number of new licenses.
1:559 You cannot mix evaluation and permanent Capacity Or Usage based licenses.
1:560 Content Indexed Objects
1:561 The CommCell ID in the License file does not match this CommServe. Please obtain a license with the correct CommCell ID [<String>] from your software provider
1:562 Existing feature license cannot be released because feature is in use. Please contact your software provider.
1:563 Data Protection Snapshot
1:564 Data Protection Replication
1:565 <String> capacity license is required to run jobs.
1:566 <String> license has been expired.
1:567 The usage for <String> has exceeded the licensed capacity. Please purchase additional capacity licenses. Until the new license is applied, click on the RESET button in control panel license administration window to temporarily allow jobs.
1:568 Failed to get the license status for <String>.
1:569 The amount of data to be protected [<String>] exceeds the limit of [<String>] for the [<String>] Capacity license.
1:570 CPU Sockets on Hypervisor Hosts
1:571 Protected Virtual Machines
1:572 Virtual Machine Provisioning
1:573 Virtual Machine Archiving
1:574 Virtual Machine Snapshot
1:575 CPU Socket Based Virtual Machine Snapshot
1:576 End point users
1:577 End point sharing users
1:578 End point E-discovery users

Data Set Manager

Code Description
13:1 Data Aging forecast has started.
13:2 Data Aging has started.
13:3 Failure to retrieve CommServe name.
13:4 Failure to initialize job object.
13:5 Failure to initialize job control object.
13:6 Exiting with errors - some files may not have been pruned.
13:7 Data Aging completed successfully.
13:8 <String> job for storage policy [<String>] starts. Total amount of data: <Number> <String>.
13:9 Received job interrupt - exiting.
13:10 Data Aging successful.
13:11 Failed to retrieve Storage Policy list.
13:12 Failed to retrieve Storage Policy copy list.
13:13 Failed to retrieve Application IDs.
13:14 Failed to retrieve Storage Policy properties.
13:15 Failed to retrieve properties of Auxiliary Copy [<String>] Storage Policy [<String>]. -- Copy skipped.
13:16 Error retrieving Storage Policy [<String>] properties: [<String>] -- Continuing with next Storage Policy.
13:17 Job completed and failed to verify some chunks.
13:18 Attached to source MediaAgent [<String>].
13:19 Failed to attach to source MediaAgent [<String>].
13:20 Failed to read chunk [<Number>] in media [<String>] for storage policy [<String>] copy [<String>]: <String>.
13:21 Failed to read from chunk [<Number>]. <String>
13:22 Failed to initialize connection to Media Manager - exiting.
13:23 Out of memory.
13:24 No <String> Copy with precedence [<Number>] available for Storage Policy [<String>].
13:25 There are applications associated with Storage Policy [<String>] which require more streams than will remain after decrementing the number of streams.
13:26 Failed to retrieve subclients associated with Storage Policy [<String>] CommCell [<Number>]. Please call the support hotline.
13:27 Invalid installation. Please call the support hotline of your software vendor.
13:28 CommServe internal error [<String>]. Please call the support hotline.
13:29 Unable to communicate with CommServe on host [<String>]. Please check the network connectivity between the Client and CommServe, and verify this product's Communication Service is running on the CommServe.
13:30 Unable to communicate with MediaAgent on host [<String>]. Please check the network connectivity between the Client and MediaAgent, and verify this product's Communication Service is running on the MediaAgent.
13:31 Unable to determine MediaAgent name. Make sure that Storage Policy settings are accurate.
13:32 Unable to determine data pipe configuration. Make sure that Storage Policy settings are accurate.
13:33 Failed to retrieve uncopied jobs for Storage Policy [<String>] Copy [<String>].
13:34 Failed to retrieve uncopied archive files of backup job [<Number>] for Auxiliary Copy [<String>] from Default Copy [<String>] Stream [<Number>].
13:35 Failed to mark job [<Number>] copied for Storage Policy [<String>] Copy [<String>].
13:36 <String> Copy is not supported by <String> iDataAgent. No data will be copied for this iDataAgent.
13:37 Duplicate archPipeConfig records of app [<Number>] were found. Operation will continue. Please call the support hotline.
13:38 No archPipeConfig record of app [<Number>] CommCell [<Number>] was found. Use default values. Please check the Subclient Properties - Software Compression.
13:39 Failed to gather information for Storage Policy [<String>] when retrieving storage policy list.
13:40 Failover for copy [<String>] in storage policy [<String>] is performed for job [<Number>], the MediaAgent has been failed over from [<String>] to [<String>], the Drive Pool has been switched from [<String>] to [<String>].
13:41 Skipping pruning of OSSV volumes as there are OSSV jobs running.
13:42 Failed to check for running OSSV jobs. No OSSV volumes will be pruned. Error: [<String>]
13:43 Invalid pass-phrase specified. Please check the spelling and try again.
13:44 A valid pass-phrase is required to restore this client encrypted data.
13:45 Unable to unlock data encryption key for archive file [<Number>]. The private key for client [<String>] was not found in memory. User probably did not specify a pass-phrase. If this is a Synthetic Full backup, please make sure that [Enable Synthetic Full] button is checked in the client properties.
13:46 Datapipe error: detected some data that was not uncompressed in the pipeline.
13:47 Datapipe error: detected some data that was not decrypted in the pipeline.
13:48 Data is partially pruned due to database problem.
13:49 Failed to prune data due to database problem.
13:50 Data is not fully pruned because job was killed.
13:51 Failed to delete from ArchDB2Log table due to database problem.
13:52 Failed to prune job history due to database problem.
13:53 Failed to prune non-backup job history due to database problem.
13:54 Failed to prune unused subclient properties due to database problem.
13:55 Failed to prune CommCell history due to database problem.
13:56 Failed to prune Audit Trail records due to database problem.
13:57 Failed to prune SQL backup set from SQL clients.
13:58 Failed to cross-check Oracle clients.
13:59 Failed to prune OSSV volumes.
13:60 Multiple Data Aging errors occurred. Please see related events and have a look at the log file.
13:61 No data path for storage policy [<String>]
13:62 Unable to communicate with Auxiliary Copy process on MediaAgent [<String>].
13:63 A CommServe database query failed. See logs on CommServe for details.
13:64 Failed to parse job's restart string. Job cannot start.
13:65 Job's task ID is invalid. Job cannot start.
13:66 Failed to get media ID for data verification. Job cannot start.
13:67 Media ID is not in CommServe database. Job cannot start.
13:68 Job's GUI sequence number is invalid. Job cannot start.
13:69 Job is for one storage policy copy but this copy is not active.
13:70 Job is for one storage policy copy but its start time is in the future.
13:71 Job is for one storage policy copy but this copy no longer exists.
13:72 Failed to retrieve storage policy ID and copy ID. Job cannot start.
13:73 No copy exists for the storage policy.
13:74 No secondary copy exists for the storage policy.
13:75 No auto copy exists for the storage policy.
13:76 Job is for all copies of a storage policy but their start times are in the future.
13:77 Failed to get type of drive pool.
13:78 No data needs to be copied, the to-be-copied jobs are deferred or the source copy doesn't have the required job.
13:79 No data needs to be verified.
13:80 Insufficient resources allocated for job. Job will go pending and resume.
13:81 Auxiliary Copy will not run for a deferred copy. There is no valid license for advanced copy.
13:82 Data multiplexing is currently enabled for one or more storage policy copies.
13:83 Advanced copy features such as inline copy and deferred copy are currently enabled for one or more storage policy copies. Please Un-Check the Inline and Deferred-Copy options from those storage policies.
13:84 Failed to prune selective deletion jobs due to a database problem.
13:85 A time-out has occurred while initializing data transfer with MediaAgent [<String>]. Please check the following \n If this is a LAN Data Transfer, check network connectivity between the Client and MediaAgent. \n For Network Free Data Transfer verify that there are no issues with the secondary storage device on the MediaAgent.
13:86 The MediaAgent [<String>] failed to connect back to the Client [<String>]. Please check the network connectivity between the Client and MediaAgent, and verify that the MediaAgent's name resolution for the Client's host name.
13:87 Some archive files are copied but not marked as valid. Please see related events and have a look at log files.
13:88 Some backup jobs completed or some backup jobs were selected after this job started. Start copying/verifying more data.
13:89 A thread of Auxiliary Copy process on MediaAgent is hanging. Please check resources and see if it sticks on any hardware.
13:90 Failed to clean aged disk chunks from database.
13:91 Failed to prune to-be-pruned extended jobs from database.
13:92 Failed to reset reference time for iDataAgents.
13:93 Failed to clean up database after Oracle cross-check due to database problem.
13:94 Oracle Cross-Check failed for some instances.
13:95 Unable to set primary copy. See logs for details.
13:96 Unable to set primary copy. There are running backup or Auxiliary Copy jobs for the storage policy.
13:97 Unable to change the effective date of a storage policy copy to a past date.
13:98 Unable to prune or disable the last full cycle of a subclient in primary copy. There are running jobs for this subclient.
13:99 Auxiliary Copy to the same library is disabled. No Auxiliary Copy for destination copy [<String>] library [<String>].
13:100 Unable to get source MediaAgent. <Message>
13:101 Auxiliary Copy for multiplexed data to a Deduplication enabled library is not supported. No Auxiliary Copy for destination copy [<String>] library [<String>].
13:102 MediaAgent [<String>] version is too low to restore data to this client. Please upgrade the MediaAgent.
13:103 Unable to get pipeline information from CommServe.
13:104 Failed to reset manual retention of jobs after the expiration date reached.
13:105 Database error. Please see related events and have a look at the log file.
13:106 Failed to delete job history without matching archiver file.
13:107 Database error. Please see related events and have a look at the log file.
13:108 Content Indexing start time is in the future for storage policy [<String>]. Job cannot start.
13:109 Content Indexing is not enabled for storage policy [<String>]. Job cannot start.
13:110 No valid backup data for Client [<String>] iDataAgent [<String>] Backup Set [<String>] Subclient [<String>].
13:111 No valid backup data for Client [<String>] iDataAgent [<String>] Backup Set [<String>].
13:112 No valid <Message> data for Client [<String>] iDataAgent [<String>] Backup Set [<String>] Subclient [<String>].
13:113 No valid backup data for Client [<String>] iDataAgent [<String>] Backup Set [<String>] Subclient [<String>] before [<String>].
13:114 No valid backup data for Client [<String>] iDataAgent [<String>] Backup Set [<String>] Subclient [<String>] after [<String>].
13:115 No non-aged valid backup data for Client [<String>] iDataAgent [<String>] Backup Set [<String>] Subclient [<String>] before [<String>].
13:116 No valid backup data for Client [<String>] iDataAgent [<String>] Backup Set [<String>] Subclient [<String>] in Storage Policy [<String>] Copy [<String>] before [<String>].
13:117 Auxiliary Copy will not run for a snapshot copy.
13:118 No valid backup data for Client [<String>] iDataAgent [<String>] Backup Set [<String>] Instance [<String>] before [<String>].
13:119 No valid backup data for Client [<String>] iDataAgent [<String>] Backup Set [<String>] Instance [<String>] before [<String>] with Copy Precedence [<Number>] Include Aged Data [<Number>].
13:120 No valid backup data for Client [<String>] iDataAgent [<String>] Instance [<String>] before [<String>].
13:121 No valid backup data for Client [<String>] iDataAgent [<String>] Instance [<String>] before [<String>] with Copy Precedence [<Number>] Include Aged Data [<Number>].
13:122 Media Refresh is not enabled for the Storage Policy copy.
13:123 Media Refresh is not enabled for any copy of the Storage Policy.
13:124 Deduplication Database Sync is not enabled for the Storage Policy copy.
13:125 No data was found for Deduplication Database Sync.
13:126 No media to refresh.
13:127 Error occurred while processing chunk [<Number>] in media [<String>] for storage policy [<String>] copy [<String>]: <String>.
13:128 System has reached within <String> percent limit of [<String>] usage.
13:129 System has reached within <String> percent limit of [<String>] usage. System may start to disable options soon.
13:130 System has reached over <String> percent of the limit for [<String>] usage. Jobs may not run.
13:131 Number of 'Reset' attempts have exceeded the limit. Backup or Archiver jobs would not run.
13:132 For [<String>], Available Capacity: <Number> TB, Used Capacity: <Number>, Percentage of capacity used <Number>.
13:133 A few jobs have been skipped on copy [<String>/<String>] since they are multiplexed jobs. Please check JobManager logs for more details on which jobs have been skipped. Enable Media Management Aux Copy Configuration parameter [Allow multiplexed data to be copied to deduplication enabled storage policy copy] to copy them.
13:134 Following jobs [<String>] have been skipped on copy [<String>/<String>] since they are multiplexed jobs. Enable Media Management Aux Copy Configuration parameter [Allow multiplexed data to be copied to deduplication enabled storage policy copy] to copy them.
13:135 A few archive files have been skipped on copy [<String>/<String>] since old chunks from these archive files have not been fully deleted.
13:136 Job [<Number>] on copy [<String>/<String>] has been marked bad as one of its chunks on media is bad.
13:137 Disabled backup job [<Number>] on copy [<String>/<String>] since source copy encountered corrupt chunk error.
13:138 Error occurred while processing chunk [<Number>] in media [<String>], at the time of error in library [<String>] and mount path [<String>], for storage policy [<String>] copy [<String>] MediaAgent [<String>]: <String>.
13:139 Error occurred while processing chunk [<Number>] in media [<String>], at the time of error in library [<String>], for storage policy [<String>] copy [<String>] MediaAgent [<String>]: <String>.
13:140 Copy [<String>/<String>] was promoted as primary copy. As a result of this operation data path and media configurations on copies [<String>/<String>] and [<String>/<String>] may have been modifed.
13:141 <String>
13:142 Cannot query CommServe database for information needed to restore corrupted DDB Store [<String>].
13:143 Cannot to connect to SIDB Engine [<String>]. Reason [<String>].
13:144 Waiting for restore job(s) [<String>] to complete restoring DDB Store [<String>] at location(s) [<String>].
13:145 Error restoring DDB Store files. Restore job(s) [<String>] encountered one or more errors.
13:146 Content Indexing process is waiting for pruning existing items to finish. Job will automatically resume after deletion is finished.
13:147 Job [<Number>] on copy [<String>/<String>] has been marked bad since data on its source copy was reported as bad.
13:148 Job was resumed but there is no data to copy. Perhaps some data that was to be copied was found to be corrupt in the last iteration of this job and was prevented from being copied.
13:149 No stream activity for [<Number>] hour(s) from source MediaAgent(s) [<String>].
13:150 No stream activity for [<Number>] hour(s).
13:151 System has reached over <String> percent of the limit for [<String>] usage. Jobs may not run. Purchased quantity [<Number>]: consumed quantity [<Number>].
13:152 License [<String>] has expired. Jobs may not run.
13:153 [<String>] license will get expired in [<Number>] days. Please call the support hotline of your software vendor.
13:154 Some jobs have encountered MediaAgent side failures during content indexing. These will be retried in the job's next attempt.
13:155 Some archive files have been skipped on copy [<String>/<String>] since old chunks from these archive files have not been fully pruned.
13:156 Some archive files from jobs [<String>] have been skipped on copy [<String>/<String>] since old chunks from these archive files have not been fully pruned.
13:157 Due to a running DDB backup job some archive files have been skipped on copy [<String>/<String>].
13:158 Due to a running DDB backup job some archive files from jobs [<String>] have been skipped on copy [<String>/<String>].
13:159 Some archive files have been skipped due to content indexing pruning failure. Please check AuxCopyMgr logs for more deails.
13:160 System has reached over <String> percent of the limit for [<String>] usage. Content Indexing job may not run. Purchased quantity [<Number>]: consumed quantity [<Number>].
13:161 Jobs [<String>] from CommCell [<Number>] have been skipped on copy [<String>/<String>].
13:162 Some of the jobs have been skipped on copy [<String>/<String>] since there is CCM data on the source copy. Please check events for more details.
13:163 Auxcopy job has been skipped on copy [<String>/<String>] since there is data from multiple commcells [<String>]. It is advised to copy jobs from one commcell to a new copy.
13:164 To Be Copied Data Exceeded
13:165 Old Jobs Not Copied
13:166 Need More Time To Copy Data
13:167 AuxCopyFallenBehind Alert To Be Copied Data Criteria is changed from GB to TB, please reconfigure the alert for the copy[<String>/<String>] if necessary.
13:168 No VM activity for [<Number>] hour(s).
13:169 Unable to communicate with CVCIAnalytics process on MediaAgent [<String>].
13:170 SafeNet KeySecure returned invalid key.
13:171 Unable to unlock data encryption key for archive file [<Number>]. The private key for Storage Policy / copy [<String> / <String>] was not found in memory.

Content Indexing

Code Description
69:1 The amount of available memory was insufficient to complete the operation.
69:2 App Type [<Number>] is not recognized for Content Indexing.
69:3 Unable to determine App Type for App ID [<Number>].
69:4 Unable to look up the MediaAgent for Content Indexing.
69:5 Failed to look up the Content Indexing Server.
69:6 Unable to lookup the pipeline pair for Content Indexing.
69:7 Unable to set up Content Indexing pipeline.
69:8 Content Indexing will utilize [<String>] as a proxy.
69:9 Failed to initialize Content Indexing map API.
69:10 Failed to open Content Indexing map API.
69:11 Failed to initialize Content Indexing cache API.
69:12 Failed to open Content Indexing cache for a new backup.
69:13 Failed to rename Content Indexing cache directory.
69:14 Failed to populate the Content Indexing collect file for archiving.
69:15 Failed to initialize Content Indexing directory.
69:16 Failed to initialize spooling of Content Indexing data.
69:17 Failed to commit spooled records to the Content Indexing database.
69:18 [<Number>] of [<Number>] files were indexed for content. [<Number>] files were skipped. [<Number>] files failed.
69:19 Failed to reserve [<Number>] bytes in the Content Indexing cache.
69:20 Failed to open the collect file generated by the file system backup.
69:21 Failed to get the subclient directory.
69:22 Failed to seek to the restart offset in the file system collect file.
69:23 The Content Indexing database is empty and cannot be archived.
69:24 Failed to find the collection for the content indexing server.
69:25 Search engine has not been initialized.
69:26 Content indexing services may be down. Please check content indexing services.
69:27 Content indexing operation failed. Please check the log.
69:28 Failed to get configuration information in Search engine initialization.
69:29 Failed to update CI result to CommServe database.
69:30 Failed to extract application data while reading the archive.
69:31 SSN
69:32 Driving License Number
69:33 American CC
69:34 VISA CC
69:35 MasterCard CC
69:36 Discover CC
69:37 Routing Number
69:38 Location
69:39 US Phone number
69:40 Fail to process the Documents.
69:41 Fail to submit batch. Please check content indexing services.
69:42 Batches are timing out. Please check content indexing services.
69:43 Merge is running. Will have to wait till Merge finish.
69:44 There are no Batch Slots available. Will have to wait till it becomes free.
69:45 There is not enough Heap available to Process Batch. Will have to wait till it becomes free
69:46 Failed to commit the documents pushed. Please check content indexing services.
69:47 The free space on Index Directory Volume [<String>] is less than minimum required [<String>] on Search Engine Node[<String>]. Please increase the disk space and resume the job again.
69:48 Failed to locate Index Directory location in registry on Search Engine node[<String>]. Please make sure Search Engine installation is completed.
69:49 Can not determine free space of index directory volume [<String>] Error [<Number>] on Search Engine node[<String>].

DataPipe

Code Description
10:1 The amount of available memory was insufficient to complete the operation.
10:2 Unable to communicate with the remote machine [<String>] to start the Data Pipe. Please check the network connectivity between the local machine and the remote machine and verify this product's Communications Service is running on the remote machine.
10:3 Unable to send data to the remote machine [<String>], <String>. Please check the network connectivity between the local machine and the remote machine and verify this product's Communications Service is running on the remote machine.
10:4 Unable to receive data from the remote machine [<String>], <String>. Please check the network connectivity between the local machine and the remote machine and verify that the Communications Service is running on the remote machine.
10:5 Not enough space in the pipeline buffer to perform encryption. At least one 64KB buffer was left unencrypted. If this job restores data that was backed up with a pre-5.0 release of this product, this is normal. If this is a Synthetic Full that uses a pre-5.0 backup, a new full backup is recommended.
10:6 Data transfer was interrupted by a network send failure. Please check the network connectivity and verify this product's Communications Service is running.
10:7 Data transfer was interrupted by a network receive failure. Please check the network connectivity and verify this product's Communications Service is running.
10:8 DataMover could not be brought down gracefully. Please check your hardware.
10:9 Shared memory and or semaphores have not been adequately set up as per the operational guidelines on the MediaAgent machine
10:10 Shared memory and or semaphores have not been adequately set up as per the operational guidelines on the client machine
10:11 Problem with Decryption of Data; need to provide Correct Pass Phrase.
10:12 Network reader unable to connect back to the network writer. Please check the name resolution on the client and the MediaAgent.
10:13 Unable to resolve host name [<String>]. Please make sure that the DNS settings are appropriate.
10:14 The remote machine [<String>] did not respond to start the Data Pipe. Please check the network connectivity between the local machine and the remote machine and verify this product's Communications Service is running on the remote machine.
10:15 [Cache Database error at source side.]
10:16 [Low disk space on the client side disk cache used by Client-Side DeDuplication. Please increase the available space on the job results directory of the client.]
10:17 [Client encountered an error while communicating SIDB-Engine.]
10:18 [Failed to open Deduplication Database (DDB) on the MediaAgent[<String>], please check network connectivity between [<String>] and DDB MediaAgent [<String>].]
10:19 [Client encountered an error while sending message to SIDB-Engine.]
10:20 [Client encountered an error while receiving message from SIDB-Engine.]
10:21 [Deduplication module encountered error at source side.]
10:22 [The Deduplication store[<String>] does not support Client-side deduplication for the stores created in older releases. Need to seal the store.]
10:23 [Source Side Deduplication encountered error (<String>) ]
10:24 Could not connect to the SIDB process at MediaAgent <String>.
10:25 Could not connect to the CVD on remote host to launch the SIDB engine at MediaAgent <String>.
10:26 Failed to start the SIDB engine at MediaAgent <String>.
10:27 Not connected to SIDB engine at MediaAgent <String>.
10:28 The network module failed to send / recv data(SIDB at MediaAgent <String>).
10:29 Timeout while waiting for a reply from SIDB engine at MediaAgent <String>.
10:30 The SIDB engine is going down at MediaAgent <String>.
10:31 The wrong SIDB engine is being contacted at MediaAgent <String>.
10:32 Incorrect signature type was passed to the SIDB engine at MediaAgent <String>.
10:33 The SIDB engine has failed to insert an entry into the SIDB tables at MediaAgent <String>.
10:34 Low disk space on the SIDB path at MediaAgent <String>.
10:35 CommServe and the single instancing database are out of sync at MediaAgent <String>.
10:36 Wrong SIDB version at MediaAgent <String>.
10:37 Could not connect to the Cache-DB process.
10:38 Could not connect to the CVD on remote host to launch the Cache-DB engine.
10:39 Failed to start the Cache-DB engine.
10:40 Not connected to Cache-DB engine.
10:41 The network module failed to send / recv data (Cache-DB).
10:42 Timeout while waiting for a reply from Cache-DB engine.
10:43 The Cache-DB engine is going down.
10:44 The wrong Cache-DB engine is being contacted.
10:45 Incorrect signature type was passed to the Cache-DB engine.
10:46 The Cache-DB engine has failed to insert an entry into the SIDB tables.
10:47 Low disk space on the client side disk cache used by Client-Side DeDuplication. Please increase the available space on the job results directory of the client.
10:48 Cannot allocate Pipeline Buffer.
10:49 SIDBEngine encountered failure in communicating CommServe <String>.
10:50 SIDB has been suspended <String>.
10:51 SIDB Initialization is failed <String>.
10:52 SIDB Encountered failure <String>.
10:53 SIDB Open Failed <String>.
10:54 SIDB is in incorrect State <String>.
10:55 SIDB is in suspended state <String>.
10:56 All SIDB substores are found offline <String>.
10:57 SIDB suspend request has been failed <String>.
10:58 SIDB Path is inaccessible <String>.
10:59 SIDB Encountered failure <String>.
10:60 SIDB substore is found offline <String>.
10:61 DDB Move is in progress <String>.

Communications Service

Code Description
3:1 Communications Service started successfully.
3:2 Communications Service stopped successfully.
3:3 Communications Service for [<String>] failed to start: [<String>].
3:4 Communications Service for [<String>] started successfully.
3:5 Communications Service for [<String>] stopped successfully.
3:6 The CommServe license for [<String>] has expired.
3:7 The MediaAgent license for [<String>] has expired.
3:8 Communications Service failed to start: [<String>].
3:9 This computer will require a manual reboot to replace system files that were in use during update installation.
3:10 Cannot produce complete firewall configuration for client [<String>]. It references client [<String>] for which firewall configuration was not established yet.
3:11 Processing of firewall configuration for client [<Number>] failed due to database lookup error.
3:12 Could not find Firewall or Data Interface Pair configuration for client [<String>], its current active node or any other Virtual Machine on that node.
3:13 Failed to retrieve CommCell Firewall certificates from the DB.
3:14 Failed to push firewall configuration to client [<String>] because of communication errors.
3:15 Failed to query client's name or ID.
3:16 Client [<String>] which is [<String>] is not a part of this CommServe's client list. Try stopping services or uninstalling instance on this client.
3:17 Could not retrieve physical machine client name from registry.
3:18 Could not apply 8.0 Firewall Config files to CommServe DB. Unknown error.
3:19 Could not find and load 8.0 Firewall configuration files.
3:20 Not connected to A/C power.
3:21 CPU utilization is too high.
3:22 No connectivity with CommServe.
3:23 Sufficient amount of free disk space is still available
3:24 Not in the right subnet
3:25 All conditions are satisfied, the jobs will run shortly
3:26 Minimum time interval between jobs
3:27 Some previously scheduled jobs are still running
3:28 Communication errors.
3:29 There are existing suspended jobs
3:30 There are existing pending jobs
3:31 There are install update jobs running
3:32 Expired CommServe SRM license
3:33 Job failed to start
3:34 Operational window
3:35 Backup activities are disabled on the CommServe
3:36 Job was killed
3:37 Job failed
3:38 Insufficient network bandwidth
3:39 Not on a wired network
3:40 Not on a wireless network
3:41 No changed files

Remote Exec Client

Code Description
58:1 Could not complete function:[<String>] - missing parameter:[<String>]
58:2 Communication with host:[<String>] failed. Please check this product's services on host:[<String>].
58:3 Could not send message to host:[<String>], received session error:[<String>=<String>]. Please check this product's services on host:[<String>].
58:4 Could not free message type:[<String>], received session error:[<String>=<String>]
58:5 Could not receive message:[<String>] from host:[<String>], received session error:[<String>=<String>]. Please check this product's services on host:[<String>].
58:6 Could not receive message from host:[<String>], received session error:[<String>=<String>]. Please check this product's services on host:[<String>].
58:7 Failed to create socket on host:[<String>], error code = [<String>].
58:8 Failed to resolve host name:[<String>], error code = [<String>].
58:9 Failed to bind port [<String>] on host:[<String>], error code = [<String>].
58:10 Failed to get socket name on host:[<String>], error code = [<String>].
58:11 Failed to listen socket on host:[<String>], error code = [<String>].
58:12 Failed to accept connection on host:[<String>], error code = [<String>].
58:13 Failed to send message on host:[<String>], error code = [<String>].
58:14 Failed to receive message on host:[<String>], error code = [<String>].
58:15 Failed to verify message on host:[<String>], error code = [<String>].
58:16 Failed to connect to host:[<String>] on host:[<String>], error code = [<String>].
58:17 Failed to make the connection before timeout [<String> seconds] on host:[<String>].
58:18 Unknown Error on host:[<String>].
58:19 Failed to bind port [<String>] on host:[<String>]. Another application may be using this port or the port is not released from the previous connection yet. Please retry after waiting for a few minutes.
58:20 Failed to connect service [<String>] on host:[<String>] from host:[<String>]. Received session error:[<String>=<String>]. Please check that this product's services on host [<String>] are up.
58:21 Failed to connect service [<String>] on host:[<String>] from host:[<String>].
58:22 Unknown event!
58:23 Unknown message!

Install Manager

Code Description
29:1 The first message.

Library and Drive Configuration

Code Description
36:1 Configuration of MediaAgent Library, Drives, and default Storage Policy completed successfully.
36:2 Memory allocation error displaying configuration.
36:3 Memory allocation error creating interface to Communications Service.
36:4 Memory allocation error creating Drive group.
36:5 Memory allocation error creating host information.
36:6 Memory allocation error.
36:7 Could not reassign Drive - received error [<String>].
36:8 Could not share DrivePool - received error [<String>].
36:9 Could not drop Master DrivePool - received error [<String>].
36:10 Failed attaching to Communications Service on CommServe [<String>] with error: [<String>].
36:11 Failed attaching to Communications Service on CommServe [<String>] - the service is not running. Please start this service.
36:12 Could not connect to Media Manager on CommServe: [<String>].
36:13 [<String>] failed. MediaAgent platform type is not valid.
36:14 [<String>] failed getting hostnames. Could not find MediaAgent or CommServe hostname in the platform information.
36:15 [<String>] failed. No host found.
36:16 Read configuration failed with error: [<String>].
36:17 Auto detect HOST:[<String>] failed with error: [<String>].
36:18 Auto detect HOST:[<String>] completed successfully. Libraries:[<String>], Drives:[<String>].
36:19 Starting services failed with error: [<String>].
36:20 Starting service for Library [<String>] failed with error: [<String>].
36:21 Starting service for Drive [<String>] failed with error: [<String>].
36:22 Stopping services failed with error: [<String>].
36:23 Stopping service for Library [<String>] failed with error: [<String>].
36:24 Stopping service for Drive [<String>] failed with error: [<String>].
36:25 Configuring host [<String>] failed. <String>
36:26 Configuring Library [<String>] failed. <String>
36:27 Configuring Drive [<String>] failed. <String>
36:28 Getting unique ID for Library [<String>] failed with error: [<String>].
36:29 Getting unique ID for Drive [<String>] failed with error: [<String>].
36:30 Getting unique ID for Master DrivePool [<String>] failed with error: [<String>].
36:31 Getting unique ID for DrivePool [<String>] failed with error: [<String>].
36:32 Internal error. Could not find Drive [<String>] in Library [<String>].
36:33 Initialization of data for host [<String>] failed with error [<String>].
36:34 Deconfiguring host [<String>] failed. <String>
36:35 Deconfiguring Drive [<String>] failed. <String>
36:36 Deconfiguring Library [<String>] failed. <String>
36:37 Discover Media is only valid on libraries.
36:38 Discover New Media only valid when Library has been configured.
36:39 Discover Media on Library [<String>] failed determining valid media types.
36:40 Discover Media on Library [<String>] failed determining spare media group list.
36:41 Discover Media on Library [<String>] failed with error [<String>].
36:42 Completed Discover New Media - no new media found in Library [<String>].
36:43 Discover Media on Library [<String>] failed. Media Manager process returned an error.
36:44 Unable to discover Media on Library [<String>]. Library is not in a ready state - it may be offline or an inventory may be in progress.
36:45 Discover Media on Library [<String>] failed. Error determining if the Library is in a ready state [<String>].
36:46 Library [<String>] must be configured before Drive [<String>].
36:47 At least one detected Library seems to have no Drives. Drivers for the Drives may not have been loaded. Please load the Drivers and run CVMMINST again.
36:48 At least one detected Library has a vendor : model [<String> : <String>], which has not been supported. Please call your vendor's support hotline.
36:49 At least one detected Drive has a vendor : model [<String> : <String>], which has not been supported. Please call your vendor's support hotline.
36:50 Drive [<String>] cannot be moved until it has been deconfigured.
36:51 Unable to get volume list for Library [<String>]. Error returned [<String>=<String>].
36:52 Unable to validate Drive configuration. No volumes were found in Library [<String>]. Please Discover Media and try again.
36:53 Error validating Drive [<String>] on Library [<String>]. Error returned [<String>].
36:54 Validate Drive on Library [<String>] failed. Library is not in a ready state - it may be doing an inventory.
36:55 Validate Drive on Library [<String>] failed. Error determining if the Library is in a ready state [<String>].
36:56 Could not move Drive [<String>]. All Drives in Library [<String>] from [<String>] through [<String>] must be deconfigured to complete the move.
36:57 Unmounting medium from Drive [<String>] failed with error [<String>=<String>].
36:58 Library [<String>] must be configured before DrivePool [<String>].
36:59 Library [<String>] must be configured before Master DrivePool [<String>].
36:60 Configuring DrivePool [<String>] failed. <String>
36:61 Configuring Master DrivePool [<String>] failed. <String>
36:62 Deconfiguring DrivePool [<String>] failed. <String>
36:63 Deconfiguring Master DrivePool [<String>] failed. <String>
36:64 Failed reading the current configuration from CommServe [<String>] - received error [<String>].
36:65 Operation failed on Drive [<String>]. Not enough information to perform action.
36:66 Operation failed on Library [<String>]. Not enough information to perform action.
36:67 Operation failed on DrivePool [<String>]. Not enough information to perform action.
36:68 Failed initialization - unable to read the platform type from the registry.
36:69 Failed reading the local platform information - received error [<String>].
36:70 Unable to add NDMP Drive to Library [<String>] and HOST [<String>]. Error returned [<String>=<String>].
36:71 Only Network browse is available for remote MediaAgents. Please enter Connect As and Password to browse the Network. To browse the local disks, run CVMMINST on MediaAgent - [<String>]
36:72 Please enter Connect As Username and Password to browse the Network.
36:73 Error impersonating user. Please verify that the username and password are correct.
36:74 Sharing Violation. The process cannot access the file because it is being used by another process.
36:75 A mount path already exists at the given location. Please enter a different mount path.
36:76 Access is denied.
36:77 The system cannot find the path specified.
36:78 Disk Libraries [<String>] are not configured. Backups to libraries [<String>] will fail until a mount path is added to them.
36:79 Disk Library [<String>] is not configured. Backups to Library [<String>] will fail until a mount path is added to it.
36:80 Unable to create NDMP Drive. 'NDMP Server Password' is different from 'NDMP Server Confirm Password'.
36:81 The access path for Drive [<String>] has changed - Drives have been added to or removed from HOST [<String>], or Drives are not being detected properly. Please configure this drive again or correct the detection problem.
36:82 Cannot detect Library [<String>] - SCSI adapters have been added to or removed from HOST [<String>], or libraries are not being detected properly. Please go to Properties Page to select the right SCSI address or correct the detection problem.
36:83 Cannot detect Drive [<String>] - SCSI adapters have been added to or removed from HOST [<String>], or drives are not being detected properly. Please go to Properties Page to select the right SCSI address or correct the detection problem.
36:84 Update SCSI bus failed for Library [<String>] failed. <String>
36:85 Update SCSI bus failed for Drive [<String>] failed. <String>
36:86 Could not find host [<String>]. Please check this host name.
36:87 Incorrect vendor for host [<String>]. The correct vendor is [<String>]. Please select the correct vendor.
36:88 Could not open an NDMP connection to host [<String>]. Please verify the NDMP server is running on that host.
36:89 Failed authenticating NDMP connection to host [<String>]. Please check the login and password.
36:90 Failed to get the OS type from host [<String>]. NDMP request failed. Please verify the firmware revision of the host.
36:91 Host [<String>] returned an unsupported OS type. Please verify the filer OS.
36:92 Unexpected error attempting to verify NDMP login to host [<String>].
36:93 A database error was encountered on the MMS2NDMPHostInfo table. Please check the Media Manager log for more information.
36:94 Cannot create mount path, Media Mount Manager may be offline!
36:95 Validation failed. Error returned [<String>].
36:96 Field [<String>] is empty.
36:97 Failed to get the OS version from host [<String>]. NDMP request failed. Please verify the firmware revision of the host.
36:98 Invalid Password.
36:99 Failed to delete NDMP information for host [<String>]. The NDMP information is still in use by a client.
36:100 NDMP Remote Server information cannot be deleted. To remove this entry, please uninstall the NDMP Remote Server.
36:101 Would you like to configure all the drives for Library [<String>]?
36:102 Are you sure you want to configure host [<String>] and all of its libraries and drives?
36:103 Are you sure you want to configure Library [<String>]?
36:104 Are you sure you want to configure Drive [<String>]?
36:105 Delete any storage policy or any storage policy copies associated with all libraries on this host. Deleting a storage policy copy will delete all backup data associated with the copy. Are you sure you want to deconfigure Host [<String>] and all of its libraries and drives?
36:106 Delete any storage policy or any storage policy copies associated with this Library. Deleting a storage policy copy will delete all backup data associated with the copy. Are you sure you want to deconfigure Library [<String>]?
36:107 Are you sure you want to deconfigure Drive [<String>]?
36:108 Drives must be deconfigured before their library. Would you like to deconfigure the drives for Library [<String>]?
36:109 Detection has already been completed. Detect again?
36:110 DMS Service for Drive [<String>] has just been started. LMS Service for Library [<String>] must be stopped and restarted to recognize the drive. Would you like to stop and restart this Library service now?
36:111 Validating a Library will mount a medium in each drive and can take several minutes per drive. Are you sure you want to validate Drives in Library [<String>]?
36:112 Validating a Drive will mount a medium in the Drive and can take several minutes. Are you sure you want to validate Drive [<String>]?
36:113 Are you sure you want to configure DrivePool [<String>]?
36:114 Are you sure you want to configure Master DrivePool [<String>]?
36:115 Would you like to configure all the Drives for Master DrivePool [<String>]?
36:116 Would you like to configure all the Drives for DrivePool [<String>]?
36:117 Are you sure you want to deconfigure DrivePool [<String>]?
36:118 Are you sure you want to deconfigure Master DrivePool [<String>]?
36:119 Drives must be deconfigured before their DrivePool. Would you like to deconfigure the Drives for DrivePool [<String>]?
36:120 DrivePools must be deconfigured before their Master DrivePool. Would you like to deconfigure the DrivePools for Master DrivePool [<String>]?
36:121 Validating a DrivePool will mount a medium in each Drive and can take several minutes per Drive. Are you sure you want to validate Drives in DrivePool [<String>]?
36:122 Validating a Master DrivePool will mount a medium in each Drive and can take several minutes per Drive. Are you sure you want to validate Drives in Master DrivePool [<String>]?
36:123 DrivePools must be deconfigured before their Library. Would you like to deconfigure the DrivePools for Library [<String>]?
36:124 Master DrivePools must be deconfigured before their Library. Would you like to deconfigure the Master DrivePools for Library [<String>]?
36:125 Are you sure you want to delete Library [<String>]?
36:126 Are you sure you want to delete DrivePool [<String>]?
36:127 Are you sure you want to delete Master DrivePool [<String>]?
36:128 Are you sure you want to delete Drive [<String>]?
36:129 The access path entered is an invalid format. Valid format is '\\.\tape#' where '#' is a positive number. Do you want to discard these changes and continue?
36:130 Are you sure you want to change SCSI address?
36:131 Dragging and dropping a DrivePool to a Master DrivePool will create a shared SAN DrivePool. Do you want to continue?
36:132 Does this Library [<String> <String>] have a barcode reader?
36:133 There is a configured Library [<String>] on MediaAgent [<String>] with the same or empty serial number; it could be the same library in SAN. Configuring the same library twice may make the library unusable in this product. Are you sure you want to configure this library?
36:134 For changing the options to take effect, you need to restart the program. Do you want to restart the program now?
36:135 Are you sure you want to change access path?
36:136 Are you sure you want to reset Library?
36:137 Are you sure you want to reset Drive?
36:138 Are you sure you want to change login/password?
36:139 Are you sure you want to delete the mount path[<String>]?
36:140 Are you sure you want to change the device name?
36:141 <String> Are you sure you want to continue anyway?
36:142 Make sure you have the privilege to create services on the passive nodes.
36:143 Remote configuration for Library and Drive is not allowed currently. Please try it on the local MediaAgent.
36:144 Are you sure you want to abort the exhaustive detection?
36:145 If you want to use this product instead of RSM for this library, please go to Device Manager and disable the Medium Changer driver for this library and detect the devices again. Are you sure you want to use RSM to control this Library?
36:146 Changing the Mount Path may cause the loss of all previous backup data. Are you sure you want to change the Mount Path?
36:147 Ready to configure.
36:148 Configuring host...
36:149 Deconfiguring host...
36:150 Error during host configuration.
36:151 Error during host deconfiguration.
36:152 Error during Library configuration.
36:153 Error during Library deconfiguration.
36:154 Error during Drive configuration.
36:155 Error during Drive deconfiguration.
36:156 Configuration of Library/Drives Completed Successfully.
36:157 Deconfiguration of Library/Drives Completed Successfully.
36:158 Auto Detection of Libraries/Drives Started on HOST:[<String>]....
36:159 Please select Detect to start Detection of Storage Libraries/Drives
36:160 Error attaching to CommServe.
36:161 Testing connection to Media Manager.
36:162 Media Manager connection successful.
36:163 Media Manager connection failed.
36:164 Could not determine CommServe or Local hostname.
36:165 Errors during AutoDetect.
36:166 Errors during AutoDetect NULL Host.
36:167 Errors During AutoDetect. Invalid platform type.
36:168 Starting MediaAgent LMSs and DMSs...
36:169 Errors during start LMSs and DMSs NULL Host.
36:170 Errors during start LMSs and DMSs.
36:171 LMS and DMS Services Started.
36:172 Stopping MediaAgent LMSs and DMSs...
36:173 Errors during stop LMSs and DMSs NULL Host.
36:174 Error stopping LMS and DMS Services.
36:175 LMS and DMS services stopped successfully.
36:176 Configuring Library [<String>]...
36:177 Configuring Drive [<String>]...
36:178 Deconfiguring Library [<String>]...
36:179 Deconfiguring Drive [<String>]...
36:180 Getting unique ID for Library [<String>]...
36:181 Getting unique ID for Drive [<String>]...
36:182 Starting service for Library [<String>]...
36:183 Stopping service for Library [<String>]...
36:184 Error stopping service for Library [<String>].
36:185 Starting service for Drive [<String>]...
36:186 Stopping service for Drive [<String>]...
36:187 Error starting Drive service.
36:188 Error stopping service for Drive [<String>].
36:189 Configuration of Library [<String>] completed successfully.
36:190 Deconfiguration of Library [<String>] completed successfully.
36:191 Deconfiguration of Library [<String>] canceled.
36:192 Configuration of Drive [<String>] completed successfully.
36:193 Deconfiguration of Drive [<String>] completed successfully.
36:194 Initializing host data.
36:195 Error initializing host data.
36:196 Completed Configuration - no items selected.
36:197 Completed Configuration - blank item selected.
36:198 Completed Deconfiguration - no items selected.
36:199 Completed Deconfiguration - blank item selected.
36:200 Trying to deconfigure <String> Libraries and <String> Drives...
36:201 Failed to attach to Communications Service.
36:202 Please Select Configure to start MediaAgent Configuration
36:203 Completed Discover New Media - no item selected.
36:204 Completed Discover New Media - invalid item selected.
36:205 Completed Discover New Media - could not get media type list.
36:206 Completed Discover New Media - could not spare media group list.
36:207 Discover New Media canceled.
36:208 Discovering new media on Library [<String>]...
36:209 Completed Discover New Media - no new media found.
36:210 Completed Discover New Media - error finding new media.
36:211 Discover New Media successful.
36:212 Validating Drive [<String>]...
36:213 Validating Library [<String>]...
36:214 Library [<String>] configuration validation successful.
36:215 Library [<String>] configuration validation failed.
36:216 Drive [<String>] configuration validation successful.
36:217 Drive [<String>] configuration validation failed.
36:218 DrivePool [<String>] configuration validation successful.
36:219 Unmounting a medium in Drive [<String>]...
36:220 Error Unmounting medium from Drive [<String>].
36:221 Error Mounting medium in Drive [<String>].
36:222 Configuring DrivePool [<String>]...
36:223 Error during DrivePool configuration.
36:224 Configuration of DrivePool [<String>] completed successfully.
36:225 Deconfiguring DrivePool [<String>]...
36:226 Deconfiguration of DrivePool [<String>] canceled.
36:227 Error during DrivePool deconfiguration.
36:228 Deconfiguration of DrivePool [<String>] completed successfully.
36:229 Configuring Master DrivePool [<String>]...
36:230 Error during Master DrivePool configuration.
36:231 Configuration of Master DrivePool [<String>] completed successfully.
36:232 Deconfiguring Master DrivePool [<String>]...
36:233 Deconfiguration of Master DrivePool [<String>] canceled.
36:234 Error during Master DrivePool deconfiguration.
36:235 Deconfiguration of Master DrivePool [<String>] completed successfully.
36:236 Validating DrivePool [<String>]...
36:237 Validating Master DrivePool [<String>]...
36:238 Initializing configuration data structures... Please wait.
36:239 Initialization failed.
36:240 Ready
36:241 Reading current configuration... Please wait.
36:242 Error reading the current configuration.
36:243 Install Disk Library...
36:244 Install Disk Library...Successful.
36:245 Install Disk Library...Failed.
36:246 Deconfigure Disk Library...
36:247 Deconfigure Disk Library...Successful.
36:248 Deconfigure Disk Library...Failed.
36:249 Add Mount Path for Disk Library...
36:250 Add Mount Path for Disk Library...Successful.
36:251 Add Mount Path for Disk Library...Failed.
36:252 Delete Mount Path from Disk Library...
36:253 Delete Mount Path from Disk Library...Successful.
36:254 Delete Mount Path from Disk Library...Failed.
36:255 Completed delete - no items selected.
36:256 Completed delete - blank item selected.
36:257 Cannot delete item - must be de-configured before delete.
36:258 Unable to add NDMP Drive to Library [<String>] and HOST [<String>].
36:259 Update Library [<String>] SCSI address failed!
36:260 Update Drive [<String>] SCSI address failed!
36:261 Resetting Library [<String>]...
36:262 Resetting Drive [<String>]...
36:263 Reset Library [<String>] successful.
36:264 Reset Library [<String>] failed. [<String>]
36:265 Reset Drive [<String>] successful.
36:266 Reset Drive [<String>] failed. [<String>]
36:267 Master DrivePool [<String>] configuration validation successful.
36:268 Library and Drive Configuration
36:269 Local Host
36:270 CommServe Host
36:271 Exit
36:272 OK
36:273 Cancel
36:274 Detect Devices
36:275 Add Disk Library
36:276 Configure
36:277 Deconfigure
36:278 Discover Media
36:279 Validate
36:280 Properties
36:281 Delete
36:282 Add Mount Path
36:283 Uninstall Library
36:284 Delete Mount Path
36:285 Detect Devices Options
36:286 Available MediaAgents:
36:287 Discover New Media
36:288 Select New Media Type:
36:289 Select Destination Scratch Pool:
36:290 Library Properties
36:291 Drive Properties
36:292 DrivePool Properties
36:293 Master DrivePool Properties
36:294 MediaAgent:
36:295 Drive Name:
36:296 Library Name:
36:297 Master DrivePool Name:
36:298 DrivePool Name:
36:299 Unique ID:
36:300 Manufacturer:
36:301 Model:
36:302 Description:
36:303 Firmware:
36:304 Serial Number:
36:305 WWN:
36:306 SCSI Address:
36:307 Access Path:
36:308 Base Address:
36:309 Drive Count:
36:310 Door Check (sec):
36:311 Disable RSM
36:312 Alias:
36:313 Unassigned
36:314 Device Name:
36:315 Service Status:
36:316 Could not communicate with the Media & Library Manager on CommServe [<String>]. Please verify this service has been started on the CommServe.
36:317 A database error was encountered when operating on the DrivePool table on CommServe [<String>]. Check the Media Manager log for more information. There may be jobs that have reserved drives in this Library - please kill these jobs and try again.
36:318 A database error was encountered when operating on the MediaGroupSpare table on CommServe [<String>]. Check the Media & Library Manager log (MediaManager.log) for more information.
36:319 The Media & Library Manager on CommServe [<String>] reported a database error. Check the Media & Library Manager log (MediaManager.log) for more information.
36:320 Storage Policy operations could not communicate with the Media & Library Manager on CommServe [<String>]. Check the Media & Library Manager log (MediaManager.log) for more information.
36:321 Storage Policy operations reported a database error on CommServe [<String>]. Check the Media & Library Manager log (MediaManager.log) for more information.
36:322 A Storage Policy could not be deleted on CommServe [<String>] because it is in use. Please check the Storage Policy assignments.
36:323 Storage Policy operations reported a database error when using the MediaGroup table on CommServe [<String>]. Check the Media & Library Manager log (MediaManager.log) for more information.
36:324 Media & Library Manager on CommServe [<String>] cannot complete action because the Library has a volume in use. Allow the backup or restore to complete.
36:325 Media & Library Manager on CommServe [<String>] cannot complete action because the Library has a volume in an unknown state. Check the Media & Library Manager log (MediaManager.log) for more information.
36:326 Media & Library Manager on CommServe [<String>] timed out waiting for a volume to mount or unmount. Check the Media & Library Manager log (MediaManager.log) for more information.
36:327 Spare Media Group could not be deleted on CommServe [<String>]. Check to see if the storage policy copies for this Library were properly deleted.
36:328 DrivePool could not be deleted on CommServe [<String>]. Check to see if the storage policy copies for this Library were properly deleted.
36:329 Could not allocate a license for library on CommServe [<String>]. Please check if there are licenses available.
36:330 Could not update the information on CommServe [<String>], the name may already be used by the other.
36:331 Could not update the information on CommServe, the name may already be used by the other.
36:332 Failed to unmount the medium from [<String>].
36:333 Failed to rename the node [<String>]. <String>
36:334 Configuring Copy Manager [<String>]...
36:335 Error during Copy Manager configuration.
36:336 Configuration of Copy Manager [<String>] completed successfully.
36:337 Deconfiguring Copy Manager [<String>]...
36:338 Error during Copy Manager deconfiguration.
36:339 Deconfiguration of Copy Manager [<String>] completed successfully.
36:340 Configuring Copy Manager [<String>] failed. <String>
36:341 De-configuring Copy Manager [<String>] failed. <String>
36:342 Would you like to configure Copy Manager [<String>] for all MediaAgents?
36:343 Are you sure you want to de-configure Copy Manager [<String>]?
36:344 Are you sure you want to de-configure Copy Manager [<String>] for all MediaAgents?
36:345 Are you sure you want to change Drive ID?
36:346 The SCSI addresses of some Libraries and Drives with serial numbers on MediaAgent[<String>] have been automatically updated in the database.
36:347 The mount path will be created under the root directory. The system will become inoperable if the root directory becomes full. Are you sure you want to create the mount path under the root directory?
36:348 You have detected devices without using Exhaustive Detection; this may result in the wrong library and drives association. Do you still want to configure devices without the Exhaustive Detection option?
36:349 Are you sure you want to create a standalone library for the selected drive?
36:350 Do you want to configure the standalone library now?
36:351 Are you sure you want to move the item to <String>?
36:352 Exhaustive detection may unload some drives on the selected MediaAgents. This may interfere with currently running backups/restores. Are you sure that you want to proceed?
36:353 Exhaustive detection will unload all drives on all the selected MediaAgents. This may interfere with currently running backups/restores. Are you sure that you want to proceed?
36:354 Do you want to configure the library now?
36:355 Are you sure you want to abort the drive validation?
36:356 Exhaustive detection has <updated/verified> the configuration. Do you want to configure Library [<String>] now?
36:357 Library only
36:358 Library and all drives
36:359 MasterDrivePool only
36:360 MasterDrivePool and all drives
36:361 DrivePool only
36:362 DrivePool and all drives
36:363 At least one library is not configured after running Exhaustive Detection. Do you still want to exit the program?
36:364 At least one library is not configured after running Exhaustive Detection. Do you still want to restart the program?
36:365 Exhaustive detection has verified <String> drives in Library [<String>]. Do you want to configure the library and the verified drives only now?
36:366 Exhaustive detection cannot verify any new drive in Library [<String>]. Please view log for details.
36:367 Host Name:
36:368 NDMP detection will require stopping library services of configured devices on the selected NDMP servers. Services will be restarted after detection. Are you sure you want to proceed?
36:369 Drive Slot Count:
36:370 Configured Drive Count:
36:371 Work Pool Number:
36:372 Please select MediaAgents first!
36:373 Select MediaAgents
36:374 A library with this name already exists. Please enter a different library name.
36:375 No devices were detected.
36:376 No new devices were detected.
36:377 Right-click a particular device to continue its configuration.
36:378 Please configure storage devices on the new MediaAgents.<String> - For SCSI devices, select Detect/Configure Devices.<String> - For other devices, select Add from the Start Menu.
36:379 Select an empty drive slot as the target
36:380 Select an empty drive slot as the target
36:381 Select the destination Master Drive Pool
36:382 No empty slots available to move this drive!
36:383 No other Master DrivePool available to create DDS DrivePool!
36:384 Please enter Connect As Username and Password to create the Mount Path from the remote MediaAgent.
36:385 Dragging and dropping a Library to another Library will create the failover Library Controllers. Do you want to continue?
36:386 Are you sure you want to delete Library Controller [<String>] on MediaAgent [<String>]?
36:387 Select the destination library
36:388 No Library available to create Failover Controller!
36:389 Library Controller Properties
36:390 This is a shared device, so changing the device properties may affect the properties (i.e., SCSI address, Access Path) of the shared device on other MediaAgents. Please detect the devices on those MediaAgents to correct any incorrect device property.
36:391 Configuring Device [<String>] failed. <String>
36:392 To discover media for Library [<String>] without the barcode reader, please enable Auto-discover Media feature for this library.
36:393 Failed to set the default media type for Library [<String>]. <String>
36:394 A full inventory of the library without barcode reader is required to identify the media. This operation will take several minutes. You can also perform a full inventory from the CommCell Console later. Click Yes to start the inventory in five minutes.
36:395 Failed to schedule the inventory for Library [<String>]. <String>
36:396 The selected Library Controller node will now move to the corresponding Library [<String>] node; please right-click the Library Controller to continue its configuration.
36:397 Generic
36:398 Copy Manager
36:399 To use RSM-enabled libraries, you also have to back up the RSM database as a separate subclient. Otherwise, any RSM database corruption may cause complete loss of data. Please see the user manual for more details.
36:400 Error while loading NDMP host info
36:401 Scanning NDMP devices. Please wait...
36:402 Are you sure you want to reset the MediaAgent [<String>]?
36:403 Are you sure you want to reset all MediaAgents?
36:404 Failed to reset MediaAgent [<String>]. <String>
36:405 This program is only used for the Disk libraries and the SCSI/SAN devices configuration. For other types of libraries, use the CommCell Console for Java GUI -> Tools -> Library & Drive Configuration to configure the libraries. Do you want to continue?
36:406 Do you want to detect the SCSI devices now?
36:407 No Service!
36:408 No Service Needed
36:409 Service Stopped!
36:410 Service Running...
36:411 Unknown!
36:412 No NDMP devices detected
36:413 Please detect devices first!
36:414 Please enter all necessary information!
36:415 Please enter Import/Export Area information!
36:416 Please enter the Device Name.
36:417 Unable to open connection to NDMP library device.
36:418 Unable to determine number of drives and their base address.
36:419 Unable to determine library vendor and model.
36:420 Please select a MediaAgent from the list.
36:421 Disk Library Properties
36:422 Mount Path Properties
36:423 Available NDMP Hosts:
36:424 Selected NDMP Hosts:
36:425 Are you sure you want to do the replacement for <String> and <String>?
36:426 Please select one device.
36:427 After discovery, move any cleaning tape that may have been discovered from the scratch pool [<String>] to the cleaning media scratch pool.
36:428 Are you sure you want to deconfigure Library Controller [<String>]?
36:429 Shared Library
36:430 Move
36:431 DDS Drive Pool
36:432 Library Controller
36:433 Deconfiguring Library [<String>] failed. <String> Do you want to force-deconfigure this library?
36:434 Please enter the name!
36:435 Please add at least one access node!
36:436 Please select an access node and the MediaAgent to detect and get the information for the cluster!
36:437 Are you sure you want to remove this access node?
36:438 Are you sure you want to remove this Centera cluster?
36:439 Adding access node [<String>] failed. <String>
36:440 Removing access node [<String>] failed. <String>
36:441 Adding Centera cluster [<String>] failed. <String>
36:442 Removing Centera cluster [<String>] failed. <String>
36:443 Regular Mount Path
36:444 Centera Mount Path
36:445 Configuring Disk Device [<String>]...
36:446 Error during Disk Device configuration.
36:447 Configuration of Disk Device [<String>] completed successfully.
36:448 Deconfiguring Disk Device [<String>]...
36:449 Error during Disk Device deconfiguration.
36:450 Deconfiguration of Disk Device [<String>] completed successfully.
36:451 Would you like to configure Disk Device [<String>] for all MediaAgents?
36:452 Are you sure you want to de-configure DiskDevice [<String>]?
36:453 Are you sure you want to de-configure DiskDevice [<String>] for all MediaAgents?
36:454 Shared Disk Device
36:455 Configuring Disk Device [<String>] failed. <String>
36:456 Configuring Disk Volume [<String>] failed. <String>
36:457 De-configuring Disk Device [<String>] failed. <String>
36:458 De-configuring Disk Volume [<String>] failed. <String>
36:459 Unknown
36:460 Fibre Channel - WWN
36:461 ISCSI - WWUI
36:462 GSS Id
36:463 ATAPI/IDE Id
36:464 A Centera Cluster already exists with the same Cluster ID.
36:465 Please enter the base folder name.
36:466 Please enter a mount path.
36:467 Please enter a valid mount path.
36:468 Cannot decrypt the password.
36:469 The password entries did not match, please enter password again!
36:470 The Cluster ID cannot change after the Centera Cluster is configured.
36:471 Using Access Node [<String>] detects different Cluster ID [<String>] from current Cluster ID [<String>]; please remove this Access Node from the list.
36:472 Failed to delete MountPath[<String>]. [Error: <String>] Do you want to remove the entry from the database? Removing the entries from the database will not delete the data from the physical disk.
36:473 Failed to deconfigure Disk Library[<String>]. <String> Do you want to de-configure it anyway?
36:474 Are you sure you want to create the mount path on the same drive of the CommServe?
36:475 Network Sharing Folder
36:476 Automatically Create Failover Library Controllers and DDS DrivePools
36:477 MS Shadow Copy
36:478 Snap View
36:479 HP/Compaq ISSG
36:480 Echo View
36:481 Fake
36:482 Sistina GFS
36:483 Are you sure you want to create the mount path on the same drive of the CommServe and DB folder?
36:484 Are you sure you want to create the mount path on the same drive of the CommServe DB folder?
36:485 Are you sure you want to create the mount path on the same drive of the MediaAgent Installation folder?
36:486 Select Drive IDs
36:487 Available Drive IDs:
36:488 Selected Drive IDs:
36:489 Failed to get the drive ID list for the library.
36:490 Are you sure you want to abort the device detection?
36:491 Updated Host successfully. Please detect devices on the new MediaAgent to update the device information.
36:492 Updated Host successfully. Please detect devices on the new MediaAgent to update the device information and re-select the Copy Manager for the Drive Pool.
36:493 Library [<String>] does not support drive identifiers; please run Exhaustive Detection or drag and drop the proper drives into the library before configuring the library.
36:494 Are you sure you want to deconfigure Library [<String>]?
36:495 Failed to start Library and Drive Configuration. <String>
36:496 User can use Library and Drive Configuration.
36:497 Another instance of 'Library and Drive Configuration' is being used by User [<String>].
36:498 Invalid user to unlock Library and Drive Configuration.
36:499 All information required to process this request is not received.
36:500 Failed to update NDMP Server. <String>
36:501 Failed to add NAS Client. <String>
36:502 Failed to remove NAS Client. <String>
36:503 Failed to undelete NAS Client. <String>
36:504 Add NDMP Server
36:505 NDMP Server Properties
36:506 Enter Drive Data:
36:507 Enter Drive Pool Data - select drive pool or fill in fields:
36:508 Enter Library Data - leave blank for new stand alone library:
36:509 Drive Description:
36:510 Drive Number:
36:511 Drive Serial Number:
36:512 Library:
36:513 MediaAgent:
36:514 NDMP Server Drive Path:
36:515 NDMP Server Host Name:
36:516 Populate Serial Number and Model
36:517 Update NDMP Server List
36:518 Cancel
36:519 OK
36:520 DNS
36:521 IPC
36:522 Port:
36:523 Access Node
36:524 Centera Cluster
36:525 Add...
36:526 Remove
36:527 Detect
36:528 Name:
36:529 Unique ID:
36:530 Access Nodes
36:531 Cluster Name:
36:532 Cluster ID:
36:533 Capacity
36:534 Version:
36:535 Detect Information From MediaAgent:
36:536 Centera Cluster List
36:537 New Cluster...
36:538 Remove Cluster
36:539 Properties...
36:540 Done
36:541 Centera Mount Path
36:542 Library Name:
36:543 Library ID:
36:544 Center Cluster:
36:545 Password
36:546 Please enter old remote server password (for this product):
36:547 Shared Mount Path
36:548 Disk Device:
36:549 Base Folder:
36:550 Add Library
36:551 MediaAgent:
36:552 IP Library Data:
36:553 MediaAgent:
36:554 Library Type:
36:555 Library Host Name:
36:556 Create Default Work Pool
36:557 Work Pool Number:
36:558 Vendor:
36:559 Model:
36:560 Description:
36:561 Drive Count:
36:562 NDMP Library Data:
36:563 NDMP Server Device Name:
36:564 Base Address:
36:565 Detect Library Data
36:566 Add Disk Library
36:567 Library Name:
36:568 Alias:
36:569 Unique ID:
36:570 Low Watermark (MB):
36:571 Automatically create storage policy for new data paths
36:572 Add NDMP Drive
36:573 DrivePool:
36:574 Drive Vendor / Model:
36:575 Selected MediaAgents:
36:576 Add >>
36:577 << Remove
36:578 Add All >>>
36:579 <<< Remove All
36:580 Discover Media Options
36:581 Yes
36:582 No
36:583 Should the media be discovered automatically for you?
36:584 Select Default Media Type:
36:585 Configuration
36:586 Configure
36:587 Device Confirmation
36:588 is an additional new device
36:589 Device:
36:590 replacement:
36:591 Device Configuration
36:592 It is strongly recommended that exhaustive detection be done prior to configuration to avoid errors. This may take several minutes.
36:593 Do Exhaustive Detection Now
36:594 Configure Devices without Exhaustive Detection
36:595 Copy Manager Controller Properties
36:596 Device Name:
36:597 Controller ID:
36:598 MediaAgent:
36:599 Manufacturer:
36:600 Model:
36:601 Firmware:
36:602 Serial Number:
36:603 WWN:
36:604 SCSI Address:
36:605 Access Path:
36:606 Concurrency Limit:
36:607 Copy Manager Device Properties
36:608 Disk Device Properties
36:609 ID Type:
36:610 ID:
36:611 LUN:
36:612 LB Offset:
36:613 Block Count:
36:614 Block Size:
36:615 Disk Volume Properties
36:616 Volume:
36:617 Mount Points:
36:618 Drive ID:
36:619 Modify...
36:620 Copy Manager:
36:621 NDMP Server Hostname:
36:622 NDMP Host List
36:623 Add New NDMP Host
36:624 Remove NDMP Host
36:625 Update NDMP Host
36:626 Add / Update
36:627 Cancel
36:628 NDMP Server Hostname:
36:629 NDMP Login:
36:630 NDMP Password
36:631 Confirm NDMP Password:
36:632 Vendor:
36:633 Firmware Revision:
36:634 Listen Port:
36:635 Device Selection
36:636 Start
36:637 Select Libraries:
36:638 Select Drives:
36:639 Auto-Configuration for New Device:
36:640 Barcode Reader Installed
36:641 Failover Library Controller
36:642 DDS DrivePool
36:643 Log
36:644 Close
36:645 Add Mount Path
36:646 Use Network Share
36:647 Connect As:
36:648 Password:
36:649 Verify Password:
36:650 Mount Path:
36:651 Media in the Free Media Pool:
36:652 Media to be discovered for this product:
36:653 Selected MediaAgents
36:654 Failed to de-configure Libraries/Drives.
36:655 Please enter a valid Mount Path (directory path).\nA valid mount path can be:\nA directory path on any local hard drive.\nexample: C:\\Temp\\MountPath\nOR\nA Universal Naming Coded (UNC) path.\nexample: \\\\server\\share\nOR\nA Unix-based path (if the library belongs\nto a Unix MediaAgent)\nexample: /usr/mount path 1
36:656 Add NDMP Device
36:657 Device Type
36:658 NDMP Library
36:659 NDMP Drive
36:660 Processing...
36:661 Abort
36:662 View log...
36:663 Aborting...
36:664 Elapsed Time:
36:665 Select MediaAgent
36:666 Detect/Configure Devices
36:667 Device Type
36:668 SCSI/SAN Devices
36:669 Detect on Selected MediaAgents in Parallel
36:670 Automatically Create DDS DrivePools
36:671 NDMP Devices
36:672 Exhaustive Detection (Only for Libraries without Drive ID Support)
36:673 SAN Switch Login
36:674 Please provide the login information on the SAN switch:
36:675 Switch IP:
36:676 User Name:
36:677 Password:
36:678 Move to...
36:679 Select the destination:
36:680 Detect Vendor
36:681 Change Password
36:682 Are you sure you want to remove the NDMP server [<String>] from the list?
36:683 Unable to determine platform type.
36:684 Failed to encrypt the password!
36:685 Drive Access Path is empty
36:686 Browse for Mount Path...
36:687 Could not get Vendor/Model information.
36:688 Could not get tape drive serial number information.
36:689 Server NDMP version does not support Serial Number and Vendor name detection.
36:690 No more memory available.
36:691 Unable to obtain Serial Number and Vendor information.
36:692 Unable to obtain Filer type.
36:693 NDMP Server Drive Path field is empty.
36:694 No NDMP server has been added.
36:695 No NDMP server has been selected from NDMP Server Host Name list.
36:696 Unable to obtain serial number and drive type.
36:697 Serial Number is not available. Please enter Serial Number manually.
36:698 Drive is not in the list of supported drives.
36:699 Empty Drive Slot <String> (empty or undetected drive)
36:700 Unknown Device
36:701 Failed to encrypt password
36:702 Failed to decrypt password
36:703 Please select the number of media between <Number> and <Number> (number of media in Free Media Pool).
36:704 Invalid Mount Path
36:705 Add
36:706 NDMP
36:707 Centera
36:708 Exhaustive Detection
36:709 Configure
36:710 De-configure
36:711 Add Master Drive Pool
36:712 Discover Media...
36:713 Validate
36:714 Reset Library
36:715 Delete
36:716 Properties...
36:717 Create DDS DrivePool...
36:718 SAN Path Report...
36:719 Reset Drive
36:720 Move to...
36:721 Move to Shared Library...
36:722 Create Standalone Library
36:723 Add Mount Path
36:724 Add Shared Mount Path
36:725 Add Centera Mount Path
36:726 Add Drive Pool...
36:727 Delete Mount Path
36:728 Select MediaAgents...
36:729 Detect/Configure Devices...
36:730 Disk Library...
36:731 Shared Disk Library...
36:732 IP Library...
36:733 Servers...
36:734 Add Library...
36:735 Add Drive...
36:736 Cluster...
36:737 Add Library...
36:738 Exit
36:739 Reset
36:740 Reset All MediaAgents
36:741 Create Failover Library Controller...
36:742 Volume Range:
36:743 De-configure on all MediaAgents
36:744 Are you sure you want to de-configure Drive [<String>] on all MediaAgents?
36:745 Client information cannot be deleted. To remove this entry, please de-configure the client from the Client Computers list.
36:746 Error updating Centera information in the database. Please check the Event Manager Service log for more details.
36:747 Error adding client [<String>]: already exist.
36:748 NAS Primary
36:749 NAS Secondary
36:750 NAS Snapshot
36:751 Generic Enabler
36:752 Shared Disk
36:753 Library Controller
36:754 Adding DRU Host[<String>] failed. <String>
36:755 Removing DRU Host [<String>] failed. <String>
36:756 Updating DRU Host [<String>] failed. <String>
36:757 None
36:758 CBRM cannot be deleted because it is in use by Centera clients. To remove this entry, please make sure no Centera clients are assigned to storage policies using this MediaAgent.
36:759 Libraries
36:760 Data Paths
36:761 Another instance of 'Library and Drive Configuration' is being used by User [<String>]. Do you want to close it and start a new instance?
36:762 This instance of 'Library and Drive Configuration' is being closed by User [<String>].
36:763 Could not open an NDMP connection to host [<String>]. The NDMP version running on that host is not supported.
36:764 Configuring Disk Library [<String>] ...
36:765 Configuring Disk Library [<String>] succeeded.
36:766 Configuring Disk Library [<String>] failed.
36:767 De-configuring Disk Library [<String>]...
36:768 De-configuring Disk Library [<String>] succeeded.
36:769 De-configuring Disk Library [<String>] failed.
36:770 Adding Mount Path [<String>] for Disk Library [<String>]...
36:771 Adding Mount Path [<String>] for Disk Library [<String>] succeeded.
36:772 Adding Mount Path [<String>] for Disk Library [<String>] failed.
36:773 Deleting Mount Path [<String>] from Disk Library [<String>]...
36:774 Deleting Mount Path [<String>] from Disk Library [<String>] succeeded.
36:775 Deleting Mount Path [<String>] from Disk Library [<String>] failed.
36:776 Creating LUN with size [<String>] GB for Disk Library [<String>]...
36:777 Created LUN for Disk Library [<String>].
36:778 Added Mount Path [<String>] for Disk Library [<String>].
36:779 Automatic Disk Group Configuration
36:780 Please select one of the following options:
36:781 Change physical disks and retry
36:782 Continue with automatic disk group configuration
36:783 Change to manual mode for disk group configuration
36:784 Cancel disk group configuration
36:785 OK
36:786 Found unconfigured physical disks available for automatic disk group configuration.
36:787 Warning: The unconfigured physical disks are not all the same size. Storage capacity will be lost in disk group configuration.
36:788 Warning: No hot spare is available to protect the disk group after configuration.
36:789 Warning: SAS physical disks are not supported for automatic disk group configuration.
36:790 Selecting manual mode will disable automatic disk group configuration. Are you sure you want to select this option?
36:791 Confirm Manual Configuration
36:792 Failed to set the registry key!
36:793 <String>
36:794 Disk group configuration cannot be performed in manual mode. Please change the mode or configure the disk group manually.
36:795 No new disk group available to configure.
36:796 Warning: No hot spare is available to protect some disk groups after configuration.
36:797 Warning: The size of hot spare may be too small to protect some disk groups after configuration.
36:798 Warning: There are unknown-type physical disks that are not supported for automatic disk group configuration.
36:799 Warning: Found a global hot spare disk that is not in slot 0.
36:800 Warning: Found one or more LUNs that do not meet standard configuration.
36:801 Warning: Found unsupported RAID type LUNs in disk array.
36:802 Remote Host Storage
36:803 Amazon S3
36:804 Microsoft Azure Storage
36:805 Nirvanix MFS
36:806 Rackspace Cloud Files
36:807 Iron Mountain ASP
36:808 Sun Cloud Storage
36:809 i365 Cloud Storage
36:810 EMC Atmos
36:811 Network Files
36:812 Warning: Found a global hot spare disk that is not in the desired slot.
36:813 Warning: Found one or more disks in the array with a different disk type compared to the specification provided for Disk Configuration.
36:814 Warning: The total number of enclosures exceeds the number in the specification provided for Disk Configuration.
36:815 Warning: Found disks in foreign state, please use Dell OpenManage Server Administrator to import or clear the foreign disk.
36:816 Failed to add user with MediaAgent management rights to library [<String>].
36:817 Warning: Found an unsupported disk array enclosure connected to the host.
36:818 Found unconfigured physical disk(s) available to configure as global hot spare disk(s).
36:819 CV Object Server
36:820 HDS Hitachi Content Platform
36:821 Mezeo Cloud Storage
36:822 Caringo CAStor
36:823 AT&T Synaptic Storage
36:824 Warning: SAS drives are not supported in the disk array.
36:825 Warning: SATA drives are not supported in the disk array.
36:826 Dell DX Object Storage Platform
36:827 OpenStack Object Storage
36:828 Amplidata AmpliStor
36:829 Library [<String>] already exists. Please enter unique library name.
36:830 In order to force deconfigure the mountpath, please use Library & Drive Configuration tool.
36:831 DDN WOS
36:832 China Mobile oNest

Media Management Service

Code Description
25:1 Failed to create directory <String>.
25:2 Failed to create directory <String>, code <Number>.
25:3 Failed to delete file <String>.
25:4 Failed to delete file <String>, Error: <Number>. Please correct the problem and delete the file manually.
25:5 Failed to delete subtree <String>.
25:6 Failed to delete subtree <String>, code <Number>.
25:7 Failed to delete directory <String>.
25:8 Failed to delete directory <String>, Error: <Number>. Please correct the problem and delete the directory manually.
25:9 Failed to get free space for <String>.
25:10 Failed to get free space for <String>, code <Number>.
25:11 [<String>]: Invalid drive ID specified.
25:12 Problem Impersonating user [<String>] in [<String>]. Error <Number>.
25:13 Problem Logging in user [<String>] in [<String>]. Error <Number>.
25:14 Problem decrypting password for user [<String>] in [<String>].
25:15 [<String>]: Path not found.
25:16 <String><String>
25:17 Controller for [<String>] did not connect after several retries. Please check if the target is working properly and the connections are okay.
25:18 Drive [<String>] in library [<String>] does not unload after several retries. Please check if the library or drive is working properly.
25:19 <String>
25:20 Auto re-synchronization with Media Manager service started. Please wait until the MediaAgent is online.
25:21 The parent directory [<String>] is not found. Creating the entire directory structure [<String>].
25:22 Media Mount Manager Service failed to start: [<String>].
25:23 Library Control Service failed to start: [<String>].
25:24 Failed to move media [<String>] in Library [<String>] to RSM Free Media Pool. Please move the media to RSM Free Media Pool using RSM Console.
25:25 Please provide the location and identifier for the media\n with Unique ID [<String>] used by JobID [<Number>]\n in Standalone library [<String>] drive [<String>].\n
25:26 [<String>]\n\n Please provide the location and identifier for the media\n with Unique ID [<String>] used by Job ID [<Number>]\n in Standalone library [<String>] drive [<String>].\n
25:27 Please insert the active media or a new media into the library [<String>] drive [<String>] for Job ID [<Number>]
25:28 [<String>]\n\n Please insert a new media into the library [<String>] drive [<String>] for Job ID [<Number>]
25:29 A CRC error was encountered when trying to read the tape for\n Job ID [<Number>] in the Standalone Library [<String>] Drive [<String>]. This could be due to:\n\n 1. The tape was written with a higher recording format,\n 2. Drive needs cleaning,\n 3. Media imperfections.\n\nPlease take appropriate action and re-run the job.
25:30 Failed to Stamp Media. A CRC error was encountered when trying to read the\n tape in the Standalone Library [<String>] Drive [<String>]. This could be due to:\n\n 1. The tape was written with a higher recording format,\n 2. Drive needs cleaning,\n 3. Media imperfections.\n\nPlease take appropriate action and re-run the operation.
25:31 A read error occurred for Job ID [<Number>] for the tape in Library [<String>] Drive [<String>].\n Tape volume block size encountered is different from this product's standard.\n\n Please insert a new tape or erase the data on this tape and re-run the job.
25:32 The media in the library [<String>] drive [<String>] for JobID [<Number>] is not correct. \n\nPlease insert the media <Message> <Message> <Message> <Message>
25:33 <String>
25:34 with barcode [<String>]
25:35 from the location [<String>]
25:36 with last write-time=[<String>].
25:37 <String>
25:38 The media in the drive is already in use by this product or it could be a cleaning media. Please eject this media \nThen insert the required media [<String>] for JobID [<Number>] <Message> <Message> <Message> <Message>
25:39 Please insert the required media [<String>] for Job ID [<Number>] <Message> <Message> <Message> <Message>
25:40 with identifier [<String>]\n
25:41 OR a new media
25:42 into the library [<String>] drive [<String>].
25:43 Media ID of the OML does not match. Expected [<String>] Got [<String>].
25:44 While accessing a drive the Serial Number obtained [<String>] is different from expected Serial Number [<String>].
25:45 Failed to flush the contents of the volume to the disk during an I/O operation on MediaAgent [<String>]. Please stop all applications accessing the disks on this machine including Windows Explorer.
25:46 Cleaning Media is loaded in the drive on [<String>] for Job ID [<Number>]. Please unload the cleaning media.
25:47 [<Message>]\n\n Please insert a new media into the library [<String>] drive [<String>] for Job ID [<Number>]
25:48 The tape drive [<String>] is no longer accessible from the MediaAgent [<String>]. This drive controller is marked as inaccessible. Please check if the drive is working properly and the host to drive connection is okay.
25:49 The tape drive [<String>] has lost accessibility from the MediaAgent [<String>] and further scans on the SCSI Bus will be stopped for discovering this drive. Please reset this drive manually when the communication issues between this MediaAgent and drive are resolved.
25:50 The tape drive [<String>], which had lost access from the host, is automatically detected on the MediaAgent [<String>]. This drive controller is marked as accessible.
25:51 The drive serial number obtained [<String>] is different from the expected SCSI Identifier [<String>] known by the Library medium changer.
25:52 System Compatibility check failed. All disk libraries using Dell disk arrays will be marked offline.
25:53 System Compatibility check failed with a critical error. All disk libraries using Dell disk arrays will be marked offline.
25:54 System Compatibility check completed with warning.

Network Module

Code Description
9:1 [<String>]:Remote system [<String>]. Protocol version is invalid.
9:2 [<String>]:Remote system [<String>]. Internal negotiation error - negotiation flag set, but the message type is not a connection [<HexNumber>=<String>].
9:3 [<String>]:Remote system [<String>]. Value for an argument [<String>] was invalid.
9:4 [<String>]:Remote system [<String>]. Message type is not PM_CONNECT and protocol has not been negotiated [<HexNumber>=<String>].
9:5 [<String>]:Remote system [<String>]. Max data value is invalid or has not been negotiated.
9:6 [<String>]:Remote system (unknown). Could not find CvSession object on the command line.
9:7 [<String>]:Remote system (unknown). Could not map view of CvSession object from shared memory - received error: [<Number>=<String>].
9:8 [<String>]:Remote system (unknown). Could not receive Communications Service Application msg. Incoming size [<Number>] is greater than max size [<Number>].
9:9 [<String>]:Remote system (not applicable). XDR Network byte order routine returned error - message data is invalid.
9:10 [<String>]:Remote system [<String>]. XDR Network byte order routine returned error - message data is invalid [<HexNumber>=<String>].
9:11 [<String>]:Remote system [<String>]. XDR Network byte order routine returned error - not enough space for converted data [<HexNumber>=<String>].
9:12 [<String>]:Remote system [<String>]. Data length [<Number>] is too big. Protocol max is [<Number>]. Data max is [<Number>].
9:13 [<String>]:Remote system [<String>]. Required parameter missing [<String>].
9:14 [<String>]:Remote system [<String>]. Socket is currently in an open state - cannot perform desired action.
9:15 [<String>]:Remote system [<String>]. The socket open failed. Error returned [<String>].
9:16 [<String>]:Remote machine [<String>]. The socket connect failed. Error returned [<Number>=<String>]. Check Network Connectivity.
9:17 [<String>]:Remote machine [<String>]. The socket connect failed - the remote process is not listening. Error returned [<Number>=<String>]. Check Network Connectivity.
9:18 [<String>]:Remote system [<String>]. The socket send failed. Error returned [<Number>=<String>].
9:19 [<String>]:Remote system [<String>]. The socket receive failed. Error returned [<String>].
9:20 [<String>]:Remote system [<String>]. The socket function was interrupted by signal. Error returned [<Number>=<String>].
9:21 [<String>]:Remote system [<String>]. The socket accept failed. Error returned [<Number>=<String>].
9:22 [<String>]:Remote system [<String>]. The socket select failed. Error returned [<Number>=<String>].
9:23 [<String>]:Remote system [<String>]. The socket receive was successful but no data was received. Error returned [<Number>=<String>].
9:24 [<String>]:Could not translate the name/address of machine [<String>] into an address/name. Error returned [<String>]. Check DNS or Host Files.
9:25 [<String>]:Remote system (not applicable). The socket bind to address failed. Error returned [<Number>=<String>].
9:26 [<String>]:Remote system (not applicable). The socket getsockname failed. Error returned [<Number>=<String>].
9:27 [<String>]:Remote system (not applicable). The socket listen failed. Error returned [<String>].
9:28 [<String>]:Remote system (not applicable). The service name [<String>] could not be found.
9:29 [<String>]:Remote system [<String>]. Unexpected message type. Received message type [<HexNumber>=<String>], Expected message type [<HexNumber>=<String>].
9:30 [<String>]:Remote system [<String>]. The socket is in an invalid state [<String>] for desired action.
9:31 [<String>]:Remote system [<String>]. Receive timed out waiting for message.
9:32 [<String>]:Remote system [<String>]. The abort operation was successful.
9:33 [<String>]:Remote system [<String>]. The service [<String>] could not be found.
9:34 [<String>]:Remote machine [<String>]. The socket connection was lost unexpectedly. MyIoctl returned 0 bytes waiting. Check Network Connectivity.
9:35 [<String>]:Remote system [<String>]. Authentication failed. Could not get the client name from platform information for platform type [<String>].
9:36 [<String>]:Remote system [<String>]. Could not get the password from platform information or the database - authentication failed.
9:37 [<String>]:Remote system [<String>]. Could not find the client password in the database - authentication failed.
9:38 [<String>]:Remote system [<String>]. Failed authentication returned from server.
9:39 [<String>]:Remote system [<String>]. Failed authentication returned from client.
9:40 [<String>]:Remote system [<String>]. Unexpected message type received [<HexNumber>=<String>] - authentication failed.
9:41 [<String>]:Remote system [<String>]. Could not encrypt challenge string when connecting - authentication failed.
9:42 [<String>]:Remote system [<String>]. Password received from client did not match the database password for that client - authentication failed.
9:43 [<String>]:Remote system [<String>]. Communications Service returned error when initiating post message processing. Pmtype=[<Number>].
9:44 [<String>]:Remote system [<String>]. Communications Service returned error when executing remote library [<String>] function [<String>].
9:45 [<String>]:Remote system [<String>]. Communications Service returned error when executing remote command [<String>] arguments [<String>].
9:46 [<String>]:Remote system [<String>]. The local file [<String>] could not be found during file transfer.
9:47 [<String>]:Remote system [<String>]. The remote file [<String>] could not be found during file transfer.
9:48 [<String>]:Remote system [<String>]. The remote system returned no-space when transferring file [<String>].
9:49 [<String>]:Remote system [<String>]. The remote system returned write error when transferring file [<String>].
9:50 [<String>]:Remote system [<String>]. Local write error when transferring file [<String>].
9:51 [<String>]:Remote system [<String>]. The remote system returned error indicating the file exists when transferring file [<String>].
9:52 [<String>]:Remote system [<String>]. Local file already existed when transferring file [<String>].
9:53 [<String>]:Remote system [<String>]. The remote system returned unknown error when transferring file [<String>].
9:54 [<String>]:Remote system [<String>]. Local unexpected error when transferring file [<String>].
9:55 [<String>]:Remote system [<String>]. The remote system returned read error when transferring file [<String>].
9:56 [<String>]:Remote system [<String>]. Local read error when transferring file [<String>].
9:57 [<String>]:Remote system [<String>]. The remote system returned open error when transferring file [<String>].
9:58 [<String>]:Remote system [<String>]. Local file could not be opened when transferring file [<String>].
9:59 [<String>]:Remote system [<String>]. Receive return error when transferring file [<String>].
9:60 [<String>]:Remote system [<String>]. Could not determine platform type.
9:61 [<String>]:Remote system [<String>]. Remote execute request returned error: [<String>].
9:62 [<String>]:Remote system [<String>]. Invalid platform type: [<String>].
9:63 Internal Error: Function [<String>] Argument [<String>]: Invalid or missing argument!
9:64 Internal Error: Function [<String>]: Operation only allowed on CommServe!
9:65 Internal Error: CVNetMessage class not initialized properly!
9:66 Internal Error: Function [<String>]: CVNetMessage does not support connection type requested!
9:67 Internal error: pre-install connection is only allowed to the CommServe.
9:68 Internal Error: CVNetMessage requires the request, response, subsystem identifiers to be initialized!
9:69 Internal Error: CVNetMessage requires the loadable DLL Name and Entry point to be initialized!
9:70 Internal Error: CVNetMessage requires the remote hostname to be initialized!
9:71 Internal Error: Could not allocate space for buffers.
9:72 Failed to establish connection to remote client hostname [<String>]!
9:73 Internal Error: Platform type is neither a QNet Child nor a Parent.
9:74 [<String>]: XML Convert: Could not convert XML message [<String>]. Error [<String>].
9:75 Failed to resolve host name [<String>]. Please make sure that the DNS settings are appropriate.
9:76 The current version of the computer [<String>] does not support executing a process by impersonating a user.
9:77 Could not initialize Session Pool for QNet CNSession class. Error [<String>].
9:78 [<String>]:Failed to initialize Windows COM subsystem.
9:79 [<String>]:Failed to initialize Server SecureSocket COM object.
9:80 [<String>]:Failed to initialize Client SecureSocket COM object.
9:81 [<String>]:Failed to get Session Key from Security object.
9:82 [<String>]:Failed to get Public Key from Security object.
9:83 [<String>]:Failed to get System Time from Security object.
9:84 [<String>]:Failed to encode [<String>].
9:85 [<String>]:Failed to decode [<String>].
9:86 Internal Error [<Number>] in CVSession while communicating with remote host [<String>]. [<String>]
9:87 Internal Error [<Number>] in CVSession. [<String>]
9:88 The network connection was lost unexpectedly. Check Network Connectivity.
9:89 Authentication failed for host [<String>]. Could not find the client entry in database.
9:90 Authentication failed for host [<String>]. Network password does not match.
9:91 CVSession Authentication failed for host [<String>]. Password is not available on the host.
9:92 Timed out waiting for a response.
9:93 Machine [<String>] is Blacklisted. It is not allowed to connect.
9:94 Inability to connect to remote machine [<String>]. Please check Network Connectivity or the machine may be down.
9:95 Connection to remote machine [<String>] refused. Please check that the services are running on the remote machine.
9:96 Inability to resolve host name [<String>]. Please make sure that the DNS settings are appropriate.
9:97 Unable to execute command [<String>] on remote machine [<String>]. Please ensure that the latest service pack is installed on the remote machine. If the problem persists contact your software provider.
9:98 SSL authentication with [<String>] has failed: [<String>]
9:99 Client [<String>] is not allowed to connect with built-in certificates. If you are reinstalling, please revoke all of the client's outstanding certificates in the Certificate Administration applet of Control Panel in the GUI.
9:100 [<String>]:Remote system [<String>]. The remote system returned error during move when transferring file [<String>].
9:101 Can't generate new certificate for client [<String>] because there are too many of them already: [<Number>]. Try revoking some first.

Connection Manager

Code Description
21:1 [<String>]:No errors.
21:2 [<String>]:Select timed out.
21:3 [<String>]:Received exit return code from callback.
21:4 [<String>]:Could not allocate memory to add node to list of sessions.
21:5 [<String>]:Could not open session for listening.
21:6 [<String>]:Could not set port to [<Number>].
21:7 [<String>]:Could not set service [<String>] during initialization.
21:8 [<String>]:Could not complete attaching to session from [<String>] to [<String>] at port <Number>. Please check the following \n 1. Network connectivity between machines. \n 2. If there is a firewall configured, make sure that the firewall configuration in the software is correct. \n 3. Check for services on the Machine [<String>].
21:9 [<String>]:Could not find socket [<Number>] in list.
21:10 [<String>]:Socket error when selecting data from socket list [<Number>=<String>].
21:11 [<String>]:Socket error when accepting incoming socket [<Number>=<String>].
21:12 [<String>]:Could not allocate buffer space for incoming message on socket [<Number>].
21:13 [<String>]:Error when receiving message on socket [<Number>].
21:14 [<String>]:Error when freeing session buffers for message [<HexNumber>=<String>].
21:15 [<String>]:Cannot change listen port parameters after listening has started.
21:16 [<String>]:Session server state is not listening, cannot wait for messages.
21:17 [<String>]:Could not register port for service name [<String>] in platform information.
21:18 [<String>]:Could not create mutex. Error returned [<Number>=<String>].
21:19 [<String>]:Session error. Error returned [<Number>=<String>].
21:20 [<String>]:Session could not be added - it is in an invalid state.
21:21 [<String>]:Could not begin thread. Error returned [<Number>=<String>].
21:22 [<String>]:Could not determine a list of sockets to listen on.

SAN Volume Configuration

Code Description
47:1 Could not complete function:[<String>] - missing parameter:[<String>].
47:2 Could not send message to host:[<String>], received session error:[<String>=<String>].
47:3 Could not attach session to host:[<String>], received session error:[<String>=<String>].
47:4 Could not free message type:[<String>], received session error:[<String>=<String>].
47:5 Could not receive message:[<String>] from host:[<String>], received session error:[<String>=<String>].
47:6 Could not receive message from host:[<String>], received session error:[<String>=<String>].
47:7 Configure SAN Volume...
47:8 Configure SAN Volume...Successful.
47:9 Configure SAN Volume...Failed.
47:10 Deconfigure SAN Volume...
47:11 Deconfigure SAN Volume...Successful.
47:12 Deconfigure SAN Volume...Failed.
47:13 Detect SAN Volume...
47:14 Detect Host:[<String>] completed successfully. SAN Volume:[<String>].
47:15 Detect SAN Volume...Failed.
47:16 Detect Host:[<String>] failed. Error: <String>
47:17 Ready
47:18 Reading current configuration... Please wait.
47:19 Error reading the current configuration.
47:20 Could not delete the configured object [<String>].
47:21 Could not read the platform information.
47:22 Unknown event!
47:23 Unknown message!

Meta-Data Database

Code Description
22:1 No rows were affected or no data was returned from the operation.
22:2 Where clause was required for the previous operation.
22:3 No values were specified for the previous operation.
22:4 RDBMS specific library has not been substituted for the stub library.
22:5 Expecting one row, received many.
22:6 Already connected to database.
22:7 No (expected) previous connection to re-establish.
22:8 No (expected) transaction in progress.
22:9 Can't lock table. No referenced transaction object.
22:10 No database server in environment set.
22:11 Timed out waiting for locks to clear.
22:12 Statement timed out before completion.
22:13 Method is not supported by this object.
22:14 Connection refused by data source.
22:15 Constraint violation (foreign or primary key).
22:16 Application bound with conflicting version of database object.
22:17 Open cursor was attempted and cursor was still open.
22:18 Fetch was attempted and cursor was closed.
22:19 Previous statement handle for this object is still open.
22:20 Error code [<Number>] returned for previous operation. Please call your vendor's support hotline if the problem persists.
22:21 Attempt to run a command on an already busy connection.
22:22 Conflict between dll and database object revisions.
22:23 Database Space Check Alert: Problem fetching global parameter [<String>], error = [<Number>]. Default value of [<Number>] will be used.
22:24 Database Space Check Alert: Problem opening table containing list of files in the database. Error [<Number>] returned.
22:25 Database Space Check Alert: Problem fetching rows from table containing list of files in the database. Error [<Number>] returned.
22:26 Database Space Check Alert: The filegroup [<String>][id=<Number>] may not have sufficient room to grow. The free space is less than <Number> percent on all drives.
22:27 Database Space Check Alert: The potential filegroup growth on drive <String>: is below the <Number> percent free space threshold (<Number> KB growth/<Number> KB free).
22:28 Database Space Check Alert: filegroup [<String>][id=<Number>] cannot grow past fixed file size set.
22:29 Transaction started at [<String>] exceeded current lock timeout period of [<Number>] seconds by [<Number>] seconds.
22:30 Could not establish connection to [<String>] on attempt [<Number>].
22:31 Established connection to [<String>] on attempt [<Number>].
22:32 DBclass Internal Buffer Overrun.
22:33 Operation requires that the table have a primary key.
22:34 Error for operation [<String>] on table [<String>].
22:35 Cannot set [where] clause for object of this subclass (Cursor or Stored Procedure).
22:36 Cannot set [order by] clause for object of this subclass (Cursor or Stored Procedure).
22:37 Drive [<String>:] has less than <Number> percent free disk space remaining. There is [<Number>] of [<Number>] KB free.

Data Classifier Client

Code Description
78:1 Exiting because event initialization failed.
78:2 Error notifying Job Manager of successful completion.
78:3 Error notifying Job Manager of failure.
78:4 Started.
78:5 Exiting...
78:6 Failed to Initialize Global Data.
78:7 Initial file transfer successful, src: [<String>] dest: [<String>] desthost: [<String>].
78:8 Failed to synch files for src: [<String>] dest: [<String>] desthost: [<String>].
78:9 Failed to start pipeline for src: [<String>] dest: [<String>] desthost: [<String>].
78:10 Failed to get LOG object in configuration for src: [<String>] dest: [<String>] desthost: [<String>].
78:11 Failed to Open Collect File.
78:12 Failed to Write into Collect File.
78:13 Failed to Read from Collect File.
78:14 Failed to Seek into Collect File.
78:15 Failed to Create Collect File.
78:16 Failed to Restart Job, Invalid restart string.
78:17 New Path Added to Repset: [<Number>] SubClient: [<Number>] from [<String>] to [<String>].
78:18 Path Repset: [<Number>] SubClient: [<Number>] Removed.
78:19 Path Started Repset: [<Number>] SubClient: [<Number>].
78:20 Path Aborted Repset: [<Number>] SubClient: [<Number>].
78:21 Path Paused Repset: [<Number>] SubClient: [<Number>].
78:22 Path Resume Repset: [<Number>] SubClient: [<Number>] successful.
78:23 Could not Add Path, Repset: [<Number>] SubClient: [<Number>].
78:24 Could not Remove Path, Repset: [<Number>] SubClient: [<Number>].
78:25 Could not Start Path, Repset: [<Number>] SubClient: [<Number>].
78:26 Could not Abort Path, Repset: [<Number>] SubClient: [<Number>].
78:27 Could not Pause Path, Repset: [<Number>] SubClient: [<Number>].
78:28 Could not Resume Path, Repset: [<Number>] SubClient: [<Number>].
78:29 Configuration Missing.
78:30 Configuration File Missing.
78:31 Configuration Corrupted.
78:32 FRN configuration missing.
78:33 Failed to update FRN configuration.
78:34 Initiated Log Transfer for RepSet: [<Number>] SubClient:[<Number>].
78:35 Deleting log file [<String>].
78:36 This machine has Delete Log Configuration Set!!!
78:37 Consistency Point successfully marked for the Replicationset [<Number>].
78:38 Consistency Point cannot be marked for the repset [<Number>].
78:39 Snapshot is successfully taken for the volume [<String>].
78:40 Snapshot cannot be taken for the volume [<String>].
78:41 Successfully made database entries for CP JobID [<Number>].
78:42 Cannot make database entries for CP JobID [<Number>].
78:43 Database needed to be rebuilt on volume [<String>].
78:44 Failed to open Database. Failure may be due to lack of drive space. Check drive space; Db Path [<String>]; ErrorMsg [<String>]; Misc-ID [<String> - <String>]
78:45 Failed to execute Database command; command [<String>];ErrorMsg [<String>];Misc-ID [<String> - <String>]. Check drive space.
78:46 Received Database error message; ErrorID [<String>]; Misc-ID [<String> - <String>]. Check drive space.
78:47 Failed Active Directory search using group [<String>]; Misc-ID [<String> - <String>]. Check valid group name and/or credentials.
78:48 Failed Active Directory connection for domain [<String>]; Misc-ID [<String> - <String>]. Check valid domain name and/or credentials.
78:49 Free space on volume [<String>] is approaching 1 GB.
78:50 Loading DC driver succeeded.
78:51 Failed to load DC driver. [<String>].
78:52 DC Monitor request sent for the following volumes. [<String>]
78:53 DC Stop Monitor request sent for the following volumes. [<String>]

Documentum iDataAgent

Code Description
96:1 Failed to initialize Documentum client agent.
96:2 Failed to generate Collect Files for Full Text Index Backup. Please make sure the Path [<String>] specified for Full Text Index is valid.
96:3 Error during Backup of Full Text Index [<String>].
96:4 Failed to communicate to client [<String>] for generating Collect Files. Please make sure this product's Services are running on this client.
96:5 Failed to communicate to Full Text Index client [<String>] for Full Text Index Backup. Please make this product's Services are running on this client.
96:6 Failed to generate Collect files for Storage Area [<String>]. Please make sure to associate the Storage Area with correct client.
96:7 Failed to generate Collect Files.
96:8 Failed to update Job Manager for progress.
96:9 Failed to notify Job Manager of Job Completion.
96:10 Failed to communicate with client [<String>] for Storage Area Backup. Please make sure this product's Services are running.
96:11 Failed to receive message from Storage Area Client. Make sure this product's Services are running on all Storage Area hosts.
96:12 Failed to create index for Storage Area Backups.
96:13 Failed to finalize the index for Storage Area Backups.
96:14 Storage Area Backup has failed on all nodes.
96:15 Documentum Discovery Request has failed with error [<String>]
96:16 Encountered error during Documentum Response parsing.
96:17 Full Text Index Quiesce Script is not specified in the subclient properties.
96:18 Full Text Index Unquiesce Script is not specified in the subclient properties.
96:19 Full Text Index Quiesce Script [<String>] execution failed. Please check the logs and verify the Quiesce Script execution.
96:20 Full Text Index Unquiesce Script [<String>] execution has failed. Please check the logs and verify the UnQuiesce Script execution and restart Index Server and Agent.
96:21 No new documents have been added since the last FULL Backup.
96:22 No new documents have been added since the last FULL Backup on client [<String>]. Skipping Incremental Backup on this client.
96:23 No documents to include in the FULL Backup for Storage Area client [<String>]. Skipping Storage Area Backup on this client.
96:24 Streams are not reserved for Storage Area Client [<String>]. Skipping Backup on this client.
96:25 Failed to generate Collect Files for Storage Area Backup. error message [<String>].

Datamover

Code Description
40:1 Out of Memory.
40:2 Failed to log on as user [<String>], domain [<String>] for writing to disk:
40:3 Failed to impersonate user [<String>], domain [<String>] for writing to disk:
40:4 Failed to decrypt password for user impersonation:
40:5 Media with barcode [<String>] in library [<String>] is write-protected.
40:6 Error occurred in Library [<String>], Drive Name [<String>], Barcode [<String>], Path [<String>] [<String>]. For more help, please call your vendor's support hotline.
40:7 Error occurred in Disk Media, Path [<String>] [<String>]. For more help, please call your vendor's support hotline.
40:8 The required media with barcode [<String>] needed for <String> job is not inside the library [<String>].
40:9 There is no spare media which the job can use to continue. Please import a spare media.
40:10 Failed to initialize client restore process. Please check that all services are running, that there is sufficient memory and that there is not a network problem.
40:11 Failed to set restore parameters. Please check that all services are running, that there is sufficient memory and that there is not a network problem.
40:12 Failed to receive source path from the CommServe. Please check that all services are running, that there is sufficient memory and that there is not a network problem.
40:13 Failed to receive destination path from the CommServe. Please check that all services are running, that there is sufficient memory and that there is not a network problem.
40:14 Failed to get the archiving rules from the CommServe. Please check that all the services are running. If the problem persists, please call your vendor's support hotline.
40:15 Cannot initialize stubbing. Please check if MAPI profile, message list file, etc. are correct.
40:16 Failed to initialize the MediaAgent modules as one of the parameters is invalid.
40:17 Failed to initialize the MediaAgent modules as the platform is invalid.
40:18 Failed to get the host name of the MediaAgent.
40:19 Failed to allocate memory to initialize the MediaAgent modules.
40:20 Failed to establish connection with the Media Manager Service.
40:21 Wrong sequence of operations encountered during the job.
40:22 Failed to create archive file on media as the MediaAgent modules have not yet been initialized.
40:23 Failed to get the information of the archive file that was created from the archive manager on the CommServe.
40:24 The media have not been initialized to continue the job.
40:25 Failed to determine the size of the chunk for the archive file.
40:26 Failed to determine the version of the CommServe.
40:27 Failed to get the unique ID of the chunk from the archive manager on the CommServe.
40:28 Interruption of data transfer due to network problems.
40:29 Data received on the MediaAgent has invalid data size.
40:30 During a backup, MediaAgent received data from a client which was not selected for the current backup operation.
40:31 Failed to position on the correct location on the media to start reading the data.
40:32 Data from the media is unreadable.
40:33 Failed to create a new chunk for the archive file.
40:34 Failed to determine the last write position on the media to continue the backup.
40:35 Failed to allocate required memory.
40:36 Failed to get the chunk information for the archive files from the archive manager on the CommServe.
40:37 Failed to get the media needed for restoring the data.
40:38 Failed to parse the metadata that was read from the media.
40:39 Failed to update the chunk information to the archive manager on the CommServe.
40:40 Failed to inform the archive manager that the archive file is closed on the media.
40:41 Invalid information sent to the archive manager while closing the chunk on the media.
40:42 Unable to determine the type of media.
40:43 Failed to determine the block size that will be used to write or read from the media.
40:44 The backup media has not been initialized properly.
40:45 Failed to update the CommServe Database with the number of file markers written on the tape.
40:46 The media was never initialized to perform the backup.
40:47 Archive file of unknown type has been requested for creation.
40:48 The NetWare volume name is invalid or is not specified in the correct format.
40:49 Failed to get free disk space on the disk volume.
40:50 Failed to connect or create a remote disk mount path.
40:51 Failed to update CommServe Database with metadata information.
40:52 Failed to contact CommServe Services from the MediaAgent[<String>] during the start of the Data Transfer operation. Please check the network connectivity from this MediaAgent to the CommServe and make sure services are running on the CommServe.
40:53 Failed to initialize the data writer.
40:54 MediaAgent module is unable to communicate with the CommServe Services even after several retries.
40:55 Found an Active MediaAgent resource which is not being used by any running jobs. Job might be failed or stopped/killed by the user.
40:56 Failed to start the modules that monitor the MediaAgent resource that is being used.
40:57 Erase Migration Data failed, could be related to querying directory or MAPI logon.
40:58 Failed to erase some of migration data, could be stubs from previous releases or archive file lookup error.
40:59 Retrieving index from Media.
40:60 Data Writer for the current multiplexing stream is in an Invalid state.
40:61 Auxiliary Copy cannot write Multiplexed Data on to a Deduplication enabled library as this operation is not supported.
40:62 Failed to retrieve Archive metadata for this job from the CommServe Database. Please contact your vendor's customer support.
40:63 Failed to impersonate user [<String>] for writing to disk path [<String>].
40:64 Error occurred in Library [<String>], Drive Name [<String>], Barcode [<String>], Path [<String>] [<Message>]. For more help, please call your vendor's support hotline.
40:65 Error occurred in Disk Media, Path [<String>] [<Message>]. For more help, please call your vendor's support hotline.
40:66 Unable to communicate with the device [<String>]. Please check whether the correct version of drivers has been installed for this device. Please check whether the devices have been configured properly.
40:67 The device is busy or not yet initialized. Please check whether the device is initialized and working properly.
40:68 Check whether the path [<String>] is accessible.
40:69 Backup file does not exist on the path [<String>]. Check whether the path [<String>] is accessible and the backup file exists at that location.
40:70 Backup file already exists on the path [<String>]. This could be due to an error in previous deconfiguration of mount path [<String>].
40:71 Unable to communicate with the device [<String>]. Please check whether the correct version of drivers has been installed for this device.
40:72 Error occurred while writing to the drive [<String>]. Check whether the drive is online and connected properly. Please check whether the correct version of drivers has been installed for this device.
40:73 Drive did not respond to commands properly. There may be too many drives on the SCSI Bus operating at the same time. Try reducing the number of drives on the SCSI Bus. Try reducing the synchronous transfer rate on the SCSI Controller. Or two controlling programs may be accessing the library concurrently. For more details, please check to see a corresponding Operating System event for this device.
40:74 Please check whether the correct version of drivers has been installed for this device. Please check whether the SCSI Bus is terminated properly.
40:75 Error occurred while reading from the drive [<String>]. See if the drive is online and connected properly. Please check whether the correct version of drivers has been installed for this device.
40:76 Device did not respond to commands properly. The SCSI Controller reset the SCSI Bus. For more details, please check to see a corresponding Operating System event for this device.
40:77 The mount path [<String>] is full. Add a new mount path to a different disk so that the job can resume.
40:78 The end-of-data marker was reached during an operation.
40:79 The block size is incorrect on the tape. Please format the tape using TapeTest.exe application and try again. For more help, call Customer Support.
40:80 The tape that was in the drive has been replaced or removed. Please make sure that the intended tape is in the drive.
40:81 The indicated device requires re-initialization due to hardware errors. Please check whether the correct version of drivers has been installed for this device.
40:82 The drive requires cleaning. Please retry after cleaning the drive.
40:83 The operation failed since the library door is opened. Retry the job after completing the operations with library.
40:84 Unable to communicate with the device [<String>]. Please check whether the correct version of drivers has been installed for this device.
40:85 No media found in drive. Please make sure that the media in the drive is not accessed by any other applications.
40:86 The media is write-protected. Please change the write-protect settings on the tape and retry the job.
40:87 The drive is being used by another application or by another job. Please wait and retry the job later.
40:88 The drive reported a CRC error. This could be because the drive needs cleaning or the tape used is old. Please retry the operation after cleaning the drive and use a different tape.
40:89 The drive reported a CRC error. This could be due to a bad block on the disk. Please run disk utilities to correct this problem.
40:90 The Physical End of Tape Reached. This could be because Early Warning for Logical End of Tape (LEOT) has not received from the Tape Drive.
40:91 Failed to Copy or verify Chunk [<Number>] in media [<String>], Storage Policy [<String>], Copy [<String>], Host [<String>], Path [<String>], File Number [<Number>], Backup Jobs [<String>].\n<Message> <Message>
40:92 During a backup, MediaAgent received invalid data sequence from the client. Please run diagnostics on the Network for the data integrity of the data transferred between the client and MediaAgent.
40:93 During a backup, MediaAgent received invalid data sequence from the client [<String>]. Please run diagnostics on the Network for the data integrity of the data transferred between the client and MediaAgent.
40:94 No Files were archived as No Rules were selected.
40:95 No Files matched archival criteria.
40:96 No Files were migrated as Rules were disabled.
40:97 Hardware device does not support Hardware Encryption. Please verify with your hardware vendor. If device does not support hardware encryption, turn off the hardware encryption feature from GUI Console and retry the operation.
40:98 Failed to enable hardware encryption on the hardware device. Please make sure that your device supports hardware encryption and it's functioning correctly.
40:99 Failed to disable hardware encryption on the hardware device. Please make sure that your device supports hardware encryption and it's functioning correctly.
40:100 Failed to retrieve Mount Path information using mount path ID [<Number>]. Please make sure that Mount Path is configured correctly.
40:101 Current backup is Deduplicated. It is prevented from multiplexing on to same media with other Jobs.
40:102 Waiting for SILO retrieval job [<Number>] to complete retrieval of volume [<Number>].
40:103 Dependent SILO retrieval job [<Number>] failed while retrieving volume [<Number>].
40:104 Starting conversion of DMAPI stubs to the new format.
40:105 Failed to convert DMAPI stubs to the new format. Please check the client logs for more details.
40:106 Successfully converted DMAPI stubs to the new format.
40:107 Waiting for SILO retrieval job [<Number>] to complete retrieval of data at path [<String>].
40:108 Dependent SILO retrieval job [<Number>] failed while retrieving data at path [<String>].
40:109 Error occurred in Cloud Storage Library Path [<String>] [<Message>]. For more help, please call your vendor's support hotline.
40:110 Client-side deduplication enabled job found Cache-Database and Deduplication-Database are out of sync. Job will be proceeded by next resume.
40:111 Failed to open Deduplication Database (DDB) on the MediaAgent[<String>], please check network connectivity between [<String>] and DDB MediaAgent [<String>].
40:112 Starting conversion of CXFS stubs to the new format.
40:113 Failed to convert CXFS stubs to the new format. Please check the client logs for more details.
40:114 Successfully converted CXFS stubs to the new format.
40:115 Unable to mount active media. [<String>].
40:116 <String>
40:117 Failed to get media during write.
40:118 Failed to open deduplication database on one or more of the following MediaAgents [<String>]. Please check the network connectivity between [<String>] and the DDB MediaAgents.
40:119 Check if the specified network path is accessible from MediaAgent [<String>].
40:120 SIDB is in incorrect State. Failed to open deduplication database on one or more of the following MediaAgents [<String>].
40:121 SIDB process has been failed on one or more of the following MediaAgents [<String>].
40:122 Cache-DB process has been failed.

CommServe Disaster Recovery

Code Description
34:1 CommServeDR: Usage: <String>
34:2 CommServeDR: Full backup started for set [<Number>].
34:3 CommServeDR: Differential backup started for set [<Number>].
34:4 CommServeDR: Full backup completed <String>.
34:5 CommServeDR: Differential backup completed <String>.
34:6 CommServeDR: Full backup failed.
34:7 CommServeDR: Differential backup failed.
34:8 CommServeDR: does not support restore (yet).
34:9 CommServeDR: Coinit fails: Error = 0x<HexNumber>.
34:10 CommServeDR: Could not create component: Error = 0x<HexNumber>.
34:11 CommServeDR: VDS::Create fails: Error = 0x<HexNumber>.
34:12 CommServeDR: VDS::GetCFG Timed out. Check the VDI.log in the MSSQL directory for details.
34:13 CommServeDR: execSQL failed for backup.
34:14 CommServeDR: VDS::Getconfig fails: Error = 0x<HexNumber>.
34:15 CommServeDR: SQL Command for Backup Timed out.
34:16 CommServeDR: VDS::Open Device fails: Error = 0x<HexNumber>.
34:17 CommServeDR: Error Performing Transfer: Error = 0x<HexNumber>.
34:18 CommServeDR: cwait failed: error = <Number>
34:19 CommServeDR: Could not launch process for sqlcmd.exe, error = <Number>.
34:20 CommServeDR: Could not open backup file [<String>], error = <Number>.
34:21 CommServeDR: Completion Failed: error = 0x<HexNumber>.
34:22 CommServeDR: Successfully completed data transfer.
34:23 CommServeDR: VDS: Unexpected termination: Error = 0x<HexNumber>.
34:24 CommServeDR: Cannot insert row, error: <String>.
34:25 CommServeDR: Cannot update row, error: <String>.
34:26 CommServeDR: Differential backup: Cannot obtain information on previous full, error = <String>.
34:27 CommServeDR(prune): Cannot start database transaction. <String>
34:28 CommServeDR(prune): Cannot get row count for table. Error=<String>.
34:29 CommServeDR(prune): No sets to purge.
34:30 CommServeDR(prune): Cannot open database table [<String>].
34:31 CommServeDR(prune): Cannot read directory entries for [<String>].
34:32 CommServeDR(prune): Could not remove [<String>], Error: <String>
34:33 CommServeDR: Duplicate or conflicting command line option [<String>]
34:34 CommServeDR: Error. More than one command specified.
34:35 CommServeDR: Insufficient arguments.
34:36 CommServeDR: Failed to initialize Event Messages.
34:37 CommServeDR(prune): Deleting ER Set [<Number>].
34:38 CommServeDR: Error getting hostname.
34:39 CommServeDR: Error initializing Job Manager Object.
34:40 CommServeDR: Error initializing Job Control Object.
34:41 CommServeDR: Error notifying Job Manager of Completion.
34:42 CommServeDR: Quit Message received from Job Manager.
34:43 CommServeDR: Could not retrieve default Disaster Recovery target directory from global parameters. Error = [<Number>].
34:44 CommServeDR: Could not retrieve list of SmartMedia files to backup. Error = [<String>]
34:45 CommServeDR: Could not flush SmartMedia files to disk, Error = [<Number>].
34:46 CommServeDR: Could not copy SmartMedia file [<String>] to directory [<String>], Error = [<String>]
34:47 CommServeDR: Could not open SmartMedia Target file [<String>] for writing, Error = [<String>]
34:48 CommServeDR: File Compression Error [<String>]
34:49 CommServeDR: Failure: [<String>]
34:50 CommServeDR: Problems encountered backing up SmartMedia files.
34:51 CommServeDR: Problems encountered backing up NT registry.
34:52 CommServeDR: Problems encountered backing up SQL metadata.
34:53 CommServeDR: Destination Directory [<String>] does not exist or is inaccessible
34:54 CommServeDR: Command [<String>] failed. System Error [<String>]
34:55 CommServeDR: Problem Impersonating User [<String>] in [<String>]. Error = [<Number>]
34:56 CommServeDR: Problem writing file for [<String>]. Destination may be full.
34:57 CommServeDR: Restarting Differential Backup as Full. Last Full completed with Errors.
34:58 CommServeDR: Destination directory has changed from [<String>] to [<String>]. Backup converted from differential to a full.
34:59 CommServeDR: Path [<String>] cannot be accessed. It may not exist. Otherwise, please check Share and Security settings.
34:60 CommServeDR: Could not delete file [<String>]. Error = [<String>].
34:61 CommServeDR: Cannot fetch row from table [<String>]. Error = [<String>].
34:62 CommServeDR: The database is still in use by another process and cannot be restored.
34:63 CommServeDR: The server the restore was attempted on is not compatible with the server the database originated from.
34:64 CommServeDR: One or more files needed for the restore already exists and the restore cannot continue.
34:65 CommServeDR: Error: [<String>].
34:66 CommServeDR: Device activation error. A physical file name may be incorrect. Consult the log file for more details.
34:67 CommServeDR: A directory specified for a log file may be invalid. Consult the CommServeDR log file for more details.
34:68 Insufficient space for one of the restore files. Consult the CommServeDR log file for more details.
34:69 Could not create temporary directory. Retry by starting CommServeDR in a local temporary directory.
34:70 The restore file specified [<String>] is not a regular file!
34:71 CommServeDR: Database may have been corrupted. All server activities are disabled.
34:72 CommServeDR: Operation was terminated abnormally. Consult CommServeDR log file for details.
34:73 CommServeDR: DBCC CHECKDB command failed to execute. Please run DBCC CHECKDB command manually to detect database corruption. This command may fail if database is located on FAT drive. Please move database to a non-FAT drive to prevent this problem.
34:74 CommServeDR: rskeymgmt.bkp is not copied to staging directory. It may not be generated for SRM.
34:75 CommServeDR: Unknown backup option. Please check the version of Microsoft SQL Server for latest support.
34:76 CommServeDR: There is insufficient system memory. Consult the CommServeDR log file for more details.

External Data Connector

Code Description
141:1 NBDB login and/or password is invalid.
141:2 Discovery job succeeded. Refresh CommCell Console to see new entities.
141:3 Failed to access cached information at [<String>] on [<String>]. If this persists, rerun discovery job with Full sync option enabled.
141:4 Job status code [<String>].
141:5 Job finished with code [<String>]-[<String>].
141:6 The network connection with remote client was lost unexpectedly. Check Network Connectivity.
141:7 NetBackup services are not running.
141:8 Unknown error.
141:9 No Array Credentials found for Filer [<String>].
141:10 Unable to reach remote client. Discover job could not be run.
141:11 Nothing to merge. No data discovered.
141:12 No data returned by NetApp Powershell. SnapDrive and SnapManager Services may not be running correctly or there are no SnapManager backup jobs to discover.
141:13 No data returned by NetApp Powershell for instance [<String>]. SnapDrive and SnapManager Services may not be running correctly or there are no SnapManager backup jobs to discover for this instance.
141:14 Multiple CCM merge execution is not allowed. Waiting for other job to finish merge.
141:15 EMC NetWorker Services are not running
141:16 Discovery failed. Please check EDCDiscovery.log for details.
141:17 TSM login and/or password is invalid

EvArchive Manager

Code Description
65:1 Out of Memory.
65:2 Has received an unprocessed element type [<Number>-<String>].
65:3 <String> threw an exception.
65:4 Browser session ID [<Number>] has been closed.
65:5 Attempt to re-associate Storage Policy [<String>] properties denied.\n\n<String>\n
65:6 Failed to initialize with the Job Manager.
65:7 Unable to re-associate the subclients: Jobs are running for this Storage Policy.
65:8 DBTran::startTran() failed error [<Number>/<String>]
65:9 Failed to associate applications for Storage Policy [<String>].
65:10 Failed to get the archive group name.
65:11 Failed to log audit trail.
65:12 Too many streams.
65:13 Archive Manager error: [<String>].
65:14 Update Storage Policy failed for [<String>]
65:15 Set next backup to be full failed.
65:16 Finish updating Storage Policy [<String>].
65:17 Could not determine original values for Storage Policy [<String>]:\n
65:18 Storage Policy name may have changed.\n
65:19 Number of Streams may have been changed to [<Number>]\n\n
65:20 Number of Streams changed from [<Number>] to [<Number>]\n
65:21 Storage Policy [<String>]: Number of Streams changed from [<Number>] to [<Number>]\n
65:22 Storage Policy Name Changed from [<String>] to [<String>]\n
65:23 Incremental Storage Policy is changed from [<String>] to [<String>]\n
65:24 Deletion of Storage Policy [<String>] denied\n\n<String>\n
65:25 There are applications associated with Archive Group [<Number>-<String>]
65:26 Get application for Archive Group failed
65:27 Unable to init with Job Manager for delete Storage Policy <String>
65:28 Unable to delete Storage Policy <String> because jobs are running
65:29 Failed to set ER storage policy to default
65:30 Failed to get information for Storage Policy <String>
65:31 An Incremental Storage Policy is configured for this Storage Policy
65:32 This Storage Policy is an active Incremental Storage Policy for another Storage Policy
65:33 Delete Archive Group failed
65:34 Deleted Storage Policy [<String>] but failed to remove backup history
65:35 Has rolled back transaction due to errors
65:36 Unsupported operation type specified
65:37 Has received an unprocessed element type [<Number>-<String>]
65:38 No copy header specified
65:39 No drive pool specified
65:40 No spare media group specified
65:41 No library specified
65:42 Operation [<String>] for Storage Policy Copy [<String>] denied\n\n<String>\n
65:43 Failed to get type and subtype for library <Number> \n
65:44 Get Desired Media Type failed\n
65:45 Get Media Group Recording Formats failed\n
65:46 Get Drive Pool list for disk library <Number> failed\n
65:47 Create Archive Group copy failed - Errors returned from Database Operation
65:48 Create Archive Group copy failed - Errors returned from Media Manager
65:49 Create Archive Group copy failed - Memory allocation problems
65:50 Create Archive Group copy failed - A copy with the same name already exists
65:51 Create Archive Group copy failed - Too many streams
65:52 Create Archive Group copy failed - Effective time of the copy cannot be in the past
65:53 Create Archive Group copy failed - Effective time of the copy cannot be in the past
65:54 Set copy <Number> <String> failed
65:55 Failed to get Application ID [<String>] Error [<String>]
65:56 Failed to get the client from Application ID [<String>]
65:57 Failed to get client ID for Application ID [<String>] Error [<String>]
65:58 Failed to get client Name for Application ID [<String>] Error [<String>]
65:59 Failed to get AppType for Application ID [<String>] Error [<String>]
65:60 Failed to get the instance from Application ID [<String>]
65:61 Failed to get instance Name for Application ID [<String>] Error [<String>]
65:62 Unable to get media list for Archive Group <Number>
65:63 Get Archive Group [<Number>] Copy list failed
65:64 Unable to get copies for Archive Group <Number>
65:65 Get Uncopied Media for Copy <Number> failed
65:66 Lookup aging rule failed
65:67 Invalid name or source policy ID.
65:68 Cloning the Storage Policy on the Policy ID [<Number>] has failed.
65:69 Failed to get Content Indexing properties for Storage Policy ID [<Number>]
65:70 Failed to get Content Indexing applications for Storage Policy ID [<Number>]
65:71 Failed to create Content Indexing properties for Storage Policy ID [<Number>]
65:72 Failed to update Content Indexing properties for Storage Policy ID [<Number>]
65:73 Failed to create Archive Group Copy and Subclient Association for Content Indexing Properties
65:74 Failed to add Deduplication access path [<String>] due to errors: [<String>]
65:75 Failed to delete Deduplication access path [<String>] due to errors: [<String>]
65:76 Failed to update Deduplication access path [<String>] due to errors: [<String>]
65:77 Failed to release Auxiliary Copy Encryption license for Storage Policy [<String>]
65:78 Failed to release Deduplication license for Storage Policy [<String>]
65:79 Failed to delete Content Indexing properties for Storage Policy ID [<Number>]
65:80 Failed to associate applications for Storage Policy [<String>] \nbecause Auxiliary Copy Encryption option cannot be used for Subclient [%s] prior to 7.0.
65:81 Storage Policy has been cloned successful. But new Access Path for Deduplication is disabled.\nPlease manually change Access Path location, then enable it.
65:82 Unable to set incremental storage policy. Jobs are running for storage policy.
65:83 Failed to get properties of Storage Policy ID [<Number>] for moving snapshot to backup media
65:84 Failed to set properties of Storage Policy ID [<Number>] for moving snapshot to backup media
65:85 Failed to release Tape Deduplication license for Storage Policy [<String>]
65:86 Failed to get properties of Storage Policy for mining snapshot
65:87 Failed to set properties of Storage Policy for mining snapshot
65:88 Unable to associate a Deduplication store to the storage policy copy. The specified Deduplication store is invalid.
65:89 Unable to associate a Deduplication store to the storage policy copy. Copies in the same storage policy cannot share Deduplication stores.
65:90 Unable to associate a Deduplication store to the storage policy copy. Storage Policies with different block sizes cannot share Deduplication stores.
65:91 Unable to get Global Deduplication host policies due to a database error
65:92 Unable to use the given Global Deduplication host policy due to a database error
65:93 Unable to get Global Auxiliary Copy host policies due to a database error
65:94 Unable to use the given Global Auxiliary Copy host policy due to a database error
65:95 Unable to get Global Auxiliary Copy Policy dependent copies due to error.
65:96 Offline Content Indexing Jobs are running for the SP. Hence failed to update Content Indexing Properties.
65:97 Change of block size not allowed since copies dependent on Global Dedup Storage Policy exists.

EvLibrary Controller

Code Description
67:1 Out of Memory

EvMedia Manager

Code Description
66:1 Out of Memory
66:2 Total Number of Mount and Unmount Errors
66:3 Number of Mount and Unmount Errors after Last Clean
66:4 Total Number of Hours Used
66:5 Number of Hours Used after Last Clean
66:6 Total Number of read, write Errors
66:7 Number of read, write Errors After Last Clean
66:8 Drive Controller is not alive, MediaAgent is offline
66:9 Has received an unprocessed element type [<Number>-<String>]
66:10 Unsupported operation type [<Number>] specified
66:11 Could not start transaction. Export media not scheduled. Error [<String>]
66:12 Security Credentials Check Failed. The error returned is : <String>
66:13 Unable to add immediate schedule entry
66:14 Error committing transaction [<String>]. Media Export not scheduled
66:15 Could not commit schedule
66:16 Could not add task
66:17 Invalid Library ID for the operation Discover Media
66:18 Problems rolling back transaction. Some data may need to be cleaned up. Error [<String>]
66:19 Could not Set Schedule for the Full Inventory
66:20 Cannot perform Quick Inventory for Non-Blind Libraries
66:21 Error retrieving Library info for Library <Number>, error = <String>
66:22 Library name [<String>] was changed to [<String>]\n
66:23 Default Scratch Pool was changed from [<String>] to [<String>].\n
66:24 'Auto Clean On Sense Code' option was turned on for the library [<String>].\n
66:25 'Auto Clean On Sense Code' option was turned off for the library [<String>].\n
66:26 'Auto Discover' option was turned on for the library [<String>].\n
66:27 'Auto Discover' option was turned off for the library [<String>].\n
66:28 Mount timeout was changed from [<Number>] to [<Number>].\n
66:29 Unmount timeout was changed from [<Number>] to [<Number>].\n
66:30 Scratch Pool [<String>] added to Library.\n
66:31 Library [<String>] Low Watermark was changed from <Number> MB to <Number> MB\n
66:32 Library [<String>] Low Watermark was changed to <Number> MB from <Number> MB\n
66:33 No default data pipe interface\n
66:34 No default data pipe interface OR exception <String>
66:35 No default data pipe interface OR unknown exception
66:36 Lookup System OS failed
66:37 Lookup System OS by client failed
66:38 Unable to initialize the registry lookup on the CommServe [<String>].
66:39 Lookup System OS by client failed
66:40 Problem encountered changing Index retention time from [<Number>] to [<Number>] days.\n
66:41 Index retention time changed from [<Number>] to [<Number>] days.\n
66:42 Scratch Pool [<String>] deleted\n
66:43 Scratch Pool [<String>] has been renamed to [<String>].\n
66:44 Scratch Pool [<String>] Low Watermark has been changed from [<Number>] to [<Number>].\n
66:45 Problems rolling back transaction. Some data may need to be cleaned up. Error [<String>]
66:46 Unable to add immediate schedule entry
66:47 No default data pipe interface OR exception
66:48 Has received an unprocessed element type [<Number>-<String>]
66:49 Media Expiration for media type [<String>]: Changed read, write error threshold from [<Number>] to [<Number>].\n
66:50 Media with identifier [<String>], Unique ID [<String>] created at time [<String>] belongs to the CommCell [<String>].
66:51 The SCSI2 reservation for the selected drive cannot be released while there are still job reservations for the selected drive's library. Please stop all corresponding jobs and try again.
66:52 The SCSI2 reservation release was attempted, but it failed.
66:53 'Mark Media Appendable' option was turned on for the library [<String>].\n
66:54 'Mark Media Appendable' option was turned off for the library [<String>].\n
66:55 'Use Appendable Media' option was turned on within [<Number>] days for the library [<String>].\n
66:56 'Use Appendable Media' option was turned off for the library [<String>].\n
66:57 'Overwritten Media When Content Verification Fail' option was turned on for the library [<String>].\n
66:58 'Overwritten Media When Content Verification Fail' option was turned off for the library [<String>].\n
66:59 'Overwritten Media When From Different CommCell' option was turned on for the library [<String>].\n
66:60 'Overwritten Media When From Different CommCell' option was turned off for the library [<String>].\n
66:61 'Start New Media When Required Media Exported' option was turned on for the library [<String>].\n
66:62 'Start New Media When Required Media Exported' option was turned off for the library [<String>].\n
66:63 'Start New Media When Required Media Stuck' option was turned on for the library [<String>].\n
66:64 'Start New Media When Required Media Stuck' option was turned off for the library [<String>].\n
66:65 Failed to retrieve existing pipeline interface pairs.
66:66 Failed to add new pipeline interface pairs.
66:67 Failed to delete pipeline interface pairs.
66:68 Failed to update pipeline interface pairs.
66:69 <String> option was turned on for the library [<String>].\n
66:70 <String> option was turned off for the library [<String>].\n
66:71 'Mark Library/Drive broken when error thresholds exceeded'
66:72 'Verify access path using Serial Number for Drive'
66:73 'Check for cleaning media loaded in Drive'
66:74 'Check for Tape Alerts'
66:75 'Set drive as needs cleaning on Cyclic Redundancy Check(CRC) errors'
66:76 SCSI Reservation options changed for the library [<String>].\n
66:77 'Auto clean drive when Cleaning Thresholds exceed'
66:78 'Continue using drive even if it needs cleaning'
66:79 Library Extended Attributes were changed for the library [<String>].\n
66:80 Drive clean interval was changed for the library [<String>].\n
66:81 Library [<String>] Warning Watermark was changed from <Number> MB to <Number> MB\n
66:82 Library [<String>] Warning Watermark was changed to <Number> MB from <Number> MB\n
66:83 Failed to check for any store in the target path [<String>] ,for details see [EvMgrs.log].
66:84 Failed to get DDB reconstruction job presence ,for details see [EvMgrs.log].
66:85 Failed to get DDB backup job presence ,for details see [EvMgrs.log].
66:86 Failed to get backup job presence ,for details see [EvMgrs.log].
66:87 Cannot start DDB move partition job as a DDB reconstruction job is currently running.
66:88 Cannot start DDB move partition job as a DDB backup job is currently running.
66:89 Cannot start DDB move partition job as there is an existing partition at the specified target path [<String>].
66:90 Cannot start DDB move partition job as a job is running to the Storage policy [<String>].
66:91 Cannot seal the store because DDB move partition job is running on this store.
66:92 Cannot start DDB reconstruction job as a DDB move partition job is currently running.
66:93 Cannot start DDB backup job as a DDB move partition job is currently running.
66:94 Failed to fetch store information for storeId [<Number>]. Please try again.

Event Manager Client

Code Description
16:1 Event Manager Client started successfully.
16:2 Event Manager Client stopped successfully.
16:3 [<String>] on computer [<String>] failed to start; Failed to get local host name.
16:4 [<String>] on computer [<String>] failed to start. Network subsystem on the computer is down.
16:5 [<String>] on computer [<String>] failed to start. Host Name for this computer may not be configured properly.
16:6 [<String>] on computer [<String>] failed to start. Name resolution failed for the interface[<String>].
16:7 [<String>] on computer [<String>] failed to start. Could not get the port number from services file.
16:8 [<String>] on computer [<String>] failed to start. Failed to determine if the computer is a cluster. Registry may be corrupt.
16:9 [<String>] on computer [<String>] failed to start. Port [<Number>] may be busy.
16:10 [<String>] on computer [<String>] failed to start. Could not get information for disk group [<String>] on machine [<String>].
16:11 [<String>] on computer [<String>] failed to start. Could not bind to the specified port on any address.
16:12 Failed to resolve host name [<String>]. Please make sure that the DNS settings are appropriate.
16:13 The current version of the computer [<String>] does not support executing a process by impersonating a user.
16:14 Calendar [<String>] definition will expire in [<String>] months.
16:15 Calendar [<String>] definition is expired.
16:16 Client [<String>] has inconsistent set of updates because additional packages were installed. Apply service pack [<String>] patch [<String>] for proper operation.
16:17 Failed to get the Search URL.
16:18 The current version of the computer [<String>] does not support browsing agent files.
16:19 Client [<String>] has inconsistent set of updates because additional packages were installed. Please apply update(s) [<String>] and/or most recent Service Pack for proper operation.

Event Manager Server

Code Description
15:1 Event Manager Server started successfully.
15:2 Event Manager Server stopped successfully.

Restore iDataAgent

Code Description
23:1 Winsock initialization error.
23:2 Socket from MediaAgent closed prematurely.
23:3 Write error on socket to MediaAgent.
23:4 Read error on socket from MediaAgent.
23:5 Get platform information failed for section [<String>], field [<String>].
23:6 Open archive [<Number>],[<Number>],[<Number>] failed.
23:7 Seek archive [<Number>],[<Number>],[<Number>] to offset [<Number>] failed.
23:8 Read archive [<Number>],[<Number>],[<Number>] starting at offset [<Number>] failed
23:9 Could not send restore status of a pathname to the GUI Server.
23:10 Error while reading pipeline buffer from MediaAgent [<String>].
23:11 Memory allocation error.
23:12 Error occurred in pipeline data transfer.
23:13 Error while setting up pipeline.
23:14 Unrecognized message [<HexNumber>]
23:15 Invalid mode [<Number>] for file [<String>].
23:16 UTF8 to Unicode conversion error: destination buffer too small.
23:17 Get File Attributes error [<Number>]
23:18 Error [<Number>] while writing to [<String>].
23:19 Error [<Number>] while issuing final BackupWrite for [<String>].
23:20 Error [<Number>] while closing [<String>].
23:21 Error [<Number>] while setting attributes [<HexNumber>] on [<String>].
23:22 Could not open [<String>]. Restoring to [<String>].
23:23 Error [<Number>] while opening [<String>].
23:24 Error [<Number>] while marking [<String>] to be moved on reboot to [<String>].
23:25 Error [<Number>] while marking registry hive [<String>] to be moved on reboot to [<String>].
23:26 Error [<Number>] while obtaining the process' access token.
23:27 Error [<Number>] while looking up the process' backup privilege.
23:28 Error [<Number>] while looking up the process' restore privilege.
23:29 Error [<Number>] while looking up the process' security privilege.
23:30 Error [<Number>] while looking up the process' take-ownership privilege.
23:31 Error [<Number>] while enabling the process' privileges.
23:32 Registry file [<String>] is not recognized as a Hive.
23:33 RegSaveKey failed
23:34 Client initialization error.
23:35 Error [<Number>] while opening registry key [<String>].
23:36 [<String>] key not found in registry. Using default hive list...
23:37 Restore of [<Number>] files on client [<String>] subclient [<String>] started.
23:38 Timeout [<Number>] seconds expired while waiting for message from MediaAgent [<String>].
23:39 Restore on client [<String>] subclient [<String>] completed.
23:40 Error [<Number>] while creating semaphore.
23:41 Protocol error: received message type [<HexNumber>] instead of [<HexNumber>].
23:42 Error [<Number>] while spawning a thread.
23:43 File Statistics: Total [<Number>], Succeeded [<Number>], Failed [<Number>]
23:44 Byte Statistics: Total [<Number>], Succeeded [<Number>], Failed [<Number>]
23:45 Pathname translation error for not-in-place restore.
23:46 Could not find a prefix for [<String>] in the source paths list.
23:47 Error [<Number>] while updating file times for [<String>].
23:48 Error [<Number>] while setting compression attribute on [<String>].
23:49 Unable to obtain controlling CommServe's name.
23:50 Unable to obtain the local host's name.
23:51 Unable to obtain CommClient platform information.
23:52 Unable to obtain event log directory name.
23:53 Could not initialize restart functionality.
23:54 Unable to obtain File System Agent directory name.
23:55 Reboot [<String>] to complete restoration of locked files.
23:56 Unable to create a file-backed list.
23:57 Could not strip [<Number>] levels off path [<String>].
23:58 Logon of <String>/<String> failed with error <Number>. Check the user's password and privileges.
23:59 Impersonation of logged on user failed with error <Number>.
23:60 Logged on as <String>/<String>
23:61