Loading...

Installing the CVINSTPKG.savf Installation Package on the IBM i Client

You must transfer the CVINSTPKG.savf installation package from the proxy client to the IBM i client using FTP and perform installation. The CVINSTPKG.savf installation package is located in the software_installation_path/iDataAgent/ProxyPackage/iSeries/ directory on the proxy client. The installation program copies all the necessary binaries into the CVLIB program library, prepares the configuration settings, and registers the Commvault TCP service.

You can start or stop the Commvault services using the standard IBM i utility by running the STRTCPSVR SERVER(*SIMPANA) and ENDTCPSVR SERVER(*COMMVAULT) commands.

Before You Begin

  1. Enable TCP/IP services.
  2. Install the IBM i agent on the proxy server
  3. Verify that the IBM i client has a valid IP address and a host name that the proxy client computer can resolve.
  4. Verify that the IBM i client has the DNS services configured and the proxy client computer host name must be resolvable.

Procedure

  1. On the IBM i client, type the following command to create a save file that will be used to receive the installation save file from the proxy client. The file must be located within the General Purpose Library (QGPL).

    CRTSAVF FILE(QGPL/CVINSTPKG) TEXT('Commvault installation save file')

  2. Using FTP transfer the installation save file (.savf) directly into the QGPL/CVINSTPKG file on the IBM i client:
    1. Start FTP from the proxy client and log on to the IBM i client with an IBM i user ID and password. Make sure that your current directory on the proxy client is /opt/Commvaultxx/iDataAgent/ProxyPackage/iSeries.

      Where

      xx: The proxy instance.

      # ftp IBM_i_client_host_name
      Name (usidev1.mycompany.com):IBM_i_user_iD
      Password:password

    2. Send the save file (.savf) to the IBM i client from the proxy client.

      ftp> bin
      ftp> cd QGPL
      ftp> put CVINSTPKG.savf

  3. Log on to the IBM i File System Agent server with a user ID that has a user class *SECOFR, for example the QSECOFR user ID.

    Note: For IBM i File System Agent servers that have a non-English operating system, perform one of the following procedures based on the profile type that you want to use.

  4. Restore the installation library stored in the .savf save file. On the command line, type the following:

    RSTLIB SAVLIB(CVSTAGE) DEV(*SAVF) SAVF(QGPL/CVINSTPKG) MBROPT(*ALL) ALWOBJDIF(*ALL) RSTLIB(CVINST)

    Note: Ignore the security changes-type message at the bottom of the installation pane.

  5. Run the CVINST/INSCVSIM installation command.

    Set the following parameters.

    • Commvault Client Name: set this parameter to the same value that is configured on the CommServe.
    • User profile to run services: Set this parameter to the user profile that will own the installed files.

      The software uses this user profile to run the Commvault backup and restore operations. You must select a user profile that meets the following requirements:

      • The profile has the *SECOFR user class and with all special authorities.
      • Is enrolled to the QDLS file system when QDLS data protection is required. For information on how to enroll the user profile, go to the IBM website, search for the Client Access Express for Windows Setup document. Click the appropriate link to open the document and search for Enroll Client Access Express users.

        Note: Do not use the following user profiles:

      • "QDBSHR"
      • "QDOC"
      • "QLPAUTO"
      • "QLPINSTALL"
      • "QRJE"
      • "QSECOFR"
      • "QSPL"
      • "QDFTOWN"
      • "QTSTRQS"
      • "QSYS"

    Optional parameters:

    • Subsystem description: Set this parameter to the IBM i subsystem name to the location where the Commvault services run; QSERVER is the default value).
    • Job queue: Set the parameter to the job queue which is already attached to the subsystem mentioned with parameter SBSD. The default input is “*DEFAULT” which will pick the existing jobq attached to the subsystem. An additional option “*CREATE” will create a new jobq in the Commvault library CVLIBOBJ and will attach to the subsystem.
    • Library: Set this parameter to specify the library. The default is *LIBL.
    • Port number: Set this parameter to the port number (*DEF uses 9401 by default). You must use this value for the CVD Port Number (NewIBM i File System AgentClient dialog box) when you create the IBM i client  in the CommCell Console.

      For information on adding an IBM i client, see Adding the IBM i File System Agent Client.

    • Data directory path: To set the location of the data files (*DEF uses the /var/commvault directory by default).
    • Job Priority: Set the job priority of the Commvault jobs. The valid values are between 1-9, where 1 is the highest priority. The default value is 5.
    • Run Priority: Set the run priority of the Commvault jobs. The valid values are between 1-99, where 1 is the highest priority. The default value is 50.
    • Start Services: Set whether the Commvault services need to start automatically after the successful installation.

    The installation command performs the following tasks:

    • Creates CVLIB and CVLIBOBJ program libraries when it does not exist
    • Copies the required files into the CVLIB program library
    • Creates the class object, job description and if you specify the job queue, then it creates the job queue
    • Copies the configuration files to the /var/commvault directory
    • Prepares the data directory
    • Changes the subsystem description by adding the new routing entry and attaches the job queue, if specified, to create the jobq
    • Starts the Commvault services in the specified subsystem
    • Sets the ownership for library, directories, and files

                      Commvault Installation (INSCVSIM)
      Type choices, press Enter.
      Commvault Client Name . . . . . .
      User Profile to run services . . Existing & Valid user profile
      Subsystem description . . . . .  QSERVER Name
        Library . . . . . . . . . . .   *LIBL Name, *LIBL, *CURLIB
      Job queue . . . . . . . . . . . *DEFAULT Name, *DEFAULT, *CREATE
      Library . . . . . . . . . . . *LIBL Name, *LIBL, *CURLIB
      Port number . . . . . . . . . . 9401 Port Number
      Data directory path . . . . . . '/var/commvault' ___________________________________________
      ___________________________________________________________________________________________
      ___________________________________________________________________________________________
      Job Priority . . . . . . . . . . 5 1-9
      Run Priority . . . . . . . . . . 50 1-99
      Start Services . . . . . . . . . *YES *YES or *N

    As a minimum, you can also run the following command for installation.

    Substitute 'XXXXX' with the user profile.

    CVINST/INSCVSIM CLIENT(ISERIES) USRPRF(XXXXX)

  6. To start the Commvault services, type the following command:

    COMMVAULT START

    To stop the Commvault services, type the following command:

    COMMVAULT STOP

    To restart the Commvault services, type the following command:

    COMMVAULT RESTART

    To uninstall the Commvault services, type the following command:

    Note: If you plan to reinstall the client without removing the job result directory from the IBM i client, then you must use the “COMMVAULT TASK(UNINSTALL) RMVJRDIR(*NO)” command, that removes all the components except the job results directory.

    COMMVAULT UNINSTALL

    To check the status of the Commvault services, on the command line, type the following command:

    COMMVAULT STATUS

    To go to the Commvault services job results directory, on the command line, type the following command:

    COMMVAULT JOBRESULTS

    To go to the logs directory that is related to the Commvault services, on the command line, type the following command:

    COMMVAULT LOGS

Result

The installation creates the CVLIB and CVLIBJOB program libraries when they do not exist.

Last modified: 8/21/2018 12:08:11 PM