Solutions and Use Cases > Exporting File System Backups as CIFS, SMB, and NFS Shares > 3DFS Configuration > Configure the 3DFS Cache Path > Configuring the 3DFS Cache by Using an Additional Setting

Configuring the 3DFS Cache by Using an Additional Setting

By default, the 3DFS cache is located in the jobResults/3dfs directory. You can specify a different path for the 3DFS cache by adding an additional setting.

Note: If you enabled Samba server for CIFS support, then you must specify a 3DFS cache path other than the Job Results directory and Commvault installation directory. CIFS support mounts the NFS shares locally in the 3dfs/exports directory. Placing the 3dfs/exports directory in the jobResults/ directory might result in Commvault timeouts.

Before You Begin

Verify that the local mount point path is accessible to all users (executable permission must be set for others).

Procedure

• On the MediaAgent computer, add the s3dfsRootDir additional setting as shown in the following table.

  For instructions about adding the additional setting from the CommCell Console, see Add or Modify an Additional Setting.

  Property	Value
  Name	s3dfsRootDir
  Category	3Dfs
  Type	STRING
  Value	new_path

Last modified: 9/6/2019 6:54:03 AM