Loading...

Contents for Service Pack 13

  1. Create Domain page is not refreshing after successfully creating domain. 1094, 1095
  2. Restore job launched from GUI is failing even if user has correct permissions set on Client group level's owner permissions. 1094, 1095
  3. Cloud apps solution may not be listed in adminconsole 1092, 1093
  4. Name change operations may not work for clients below version 10. 1090, 1091
  5. Performance enhancement retrieving virtual machine information. 1063, 1065, 1067, 1085
  6. 1-Touch backup fails if pvs command outputs DM name of disk instead of actual name Linux 1-Touch backup might fail if lvm commands report non-persistent device mapper names rather than persistent device mapper names 1066
  7. Enhancement to support entity extraction of Exchange data. 1064
  8. Explorer plugin may not display overlay icons. 1062
  9. Pure Storage IntelliSnap jobs may fail if there is a case mismatch on the IQN. 1060
  10. Pure Storage IntelliSnap jobs may fail on firmware 4.7 or lower. 1060
  11. Virtual server backups may complete with errors due to failures collecting file level metadata. 1058
  12. Enhancement to allow browse and restore of files from virtual machine clients. 1055, 1056
  13. Delete operation on a job may not mark the job as pruned. 1054
  14. Mailbox discovery for O365 in sovereign clouds may not work. 1052
  15. IntelliSnap backups may wait with a message that no resources are available. 1050
  16. OracleVM backups may fail when VMs have empty cdroms attached. 1049
  17. Mailbox Agent (Classic) with Office 365 mailboxes and AutoDiscover enabled may move mailboxes out of "Do Not Backup" subclient. 1048
  18. Browse by JobId from command line may not show any data. 1045
  19. Linux 1-Touch - add back skipped mountpoints for powerpath/drbd/etc. devices to /etc/fstab after restore 1043
  20. Backups may fail during archive Index phase. 1041
  21. Hadoop distributed backup may fail when Kerberos authentication is enabled. 1040
  22. CommServe Upgrade may hang. 1036, 1038
  23. File level metadata collection may fail. 1033
  24. Enhancement to fail files that are already open in shared write mode. 1030
  25. Browse and restore from Exchange MB classic agent may display duplicate folders 1017
  26. Oracle RAC data aging crosscheck operation may fail with missing CMDFILE error. 1016
  27. Oracle restores may fail with a connection lost error. 1015
  28. Backup Job Summary Report may not show Virtual Server Synthetic Full job info. 1019
  29. Two Factor Authentication configuration is not honored for Mapped AD user groups 1018, 1022
  30. Schedule Reports may not be sent as email. 1013
  31. Security vulnerability in Chilkat package. 1012
  32. CVD process may stop abruptly on IBM i client 1014
  33. Download Center may not show all the registered packages. 1009
  34. DDB Backups may not run if the DDB subclient is deconfigured. 1003, 1004
  35. Jobs initiated from admin console server plan may be automatically converted to a full. 1001, 1002
  36. Activate and cancel buttons may not be visible on the registration takeover screen. 987
  37. Fixes for Spanish localization. 986, 988
  38. IntelliSnap jobs for NetApp cluster mode luns may fail with VSS timeout error. 983
  39. Restoring multiple files with same name in Compliance Search may not restore all the files. 979
  40. Incremental backup of FusionStorage VM may fail. 974
  41. Simplified API for VMware in place restore which takes VM GUID and job id and sub client details in query. 964, 965
  42. A user with backup capabilties may not be able to start a backup from AdminConsole. 960, 961, 962, 963
  43. Enhancements for Hyperscale imaging. 949
  44. VMware live sync may fail or hang when the VM has disks attached to a secondary SCSI controller. 948
  45. Re seller feature support in Admin console. 945, 946, 947
  46. Reseller feature support 941, 942, 943, 944
  47. Backup may fail randomly with 404 error for premium storage unmanaged Azure virtual machines. 939
  48. Backup of Azure virtual machines may fail with error "VM is not found" 939
  49. Managed disk snapshots are left over in Azure even after streaming backup is completed. 939
  50. Enhancement to allow file search in virtual machines. 936, 937
  51. Exchange Online mailbox backup may protect stubs always. 926, 927
  52. Oracle Cloud VMs may be deleted after being restored. 920
  53. Azure stack backup may run for a long time when the disk footer reports incorrect size. 919
  54. NDMP restores may report a large number of failed or skipped files. 918
  55. Backup copy jobs may report "dangling inodes" errors. 918
  56. CVD process may crash on IBM i. 900
  57. Update install jobs may start on IBM i when other jobs are running. 900
  58. IBM i DR backup jobs may fail with error message CPI5922. 900
  59. Enhancement to support Amazon RDS using a Linux proxy. 908
  60. IntelliSnap backup for Oracle Database on Windows may not delete archive log file after they are backed up. 906
  61. The application size for a Windows File System backup may be higher than expected if the job is restarted. 899
  62. Changing client name change may result in loss of communication to the client 898
  63. Exported Job summary report has the job start and end time in unix time format. 896
  64. VMware backups may not complete. 895
  65. Enhancement to download email in EML format when using WebConsole from a Mac. 889, 890, 891
  66. WebConsole email download may fail if SSL/TLS is configured with a self-signed certificate. 889, 890, 891
  67. AWS live browse may leave stale volumes. 886
  68. VMware Changed Block Tracking may be reset on a VM during snap backup even though it is disabled on the subclient. 883
  69. Junk email folder may get back up even though it is is in excluded list. 875
  70. Job visibility fixes for Virtual Server agent. 868, 870, 872
  71. AdminConsole/ComplianceSearch web page may not come up after fresh install due to port number conflict 859
  72. Enhancement to SDG app to support email and SharePoint data. 856, 857, 858, 861
  73. Exchange GDPR job may fail. 856, 857, 858, 861
  74. Content indexing API for Edge drive may fail. 856, 857, 858, 861
  75. EDiscovery Project and inventory security sharing may not work. 856, 857, 858, 861
  76. Enhancement. New OS support. 854
  77. Unable to change Bandwidth throttling rules for any CDR client. 853
  78. ExchBackup.exe may not exit when Exchange mailbox backup completes. 852
  79. Index gateway service may not start. 849, 850
  80. VSA AppAware backup may fail to discover Apps from a linux based proxy. 848
  81. Some pages may not load in AdminConsole. 844
  82. CVRecallMailbox utility may fail to recall email with embedded attachments 840
  83. Incorrect error message may be reported when a DDB volume is not mounted in HyperScale appliance. 836
  84. MSSQL AG backup may fail. 835
  85. Azure client creation may fail with authentication errors when connecting to Azure German Cloud. 822
  86. HyperScale upgrade from SP9 to SP12 fails. 816
  87. Mount path free space on HyperScale may be reported as zero. 813
  88. Alert may not be generated when a bad disk is detected in a HyperScale storage pool. 811
  89. Sharepoint Online restore may fail with a web exception. 809
  90. SharePoint Online backup of some files may fail with a "BadRequest (400)" error. 804
  91. SQL restore will fail with LSN errors when point in time restore was done from block level backups. On performing point in time restore from Block level backups, latest data will be seen rather than data between given time range. 805
  92. Offline Browse of a SharePoint Content Database may find the latest data in the restored database than the data between provided browse time range. 805
  93. Enhancement. New OS support. 803
  94. Alert modification may fail when associating a large number of entities. 786
  95. Enhancements to hide infrastructure resources from tenant administrators. 774, 777, 778, 779
  96. Web SLA Report does not allow custom time frame for more than 30 days. 767
  97. Online health report SLA tile may not show the correct status. 766
  98. Performance improvement for NetApp NAS FileSystem snapshot cataloging. 756
  99. MediaAgent services may crash when Isilon engine is used. 755
  100. Enhancements for HyperScale Appliance for 1-gig management network. 753
  101. Browse and restore may fail because of an index playback failure. 746
  102. Size of data in browse may be incorrect. 745
  103. Backup may not start with error that the size is over the quota for the owner. 745
  104. Block Level backup copy job may fail after being restarted. 741
  105. OnDemandInstance ArchiveLog Backup for Oracle RAC may fail. 741
  106. Oracle RAC restore may fail when using an OnDemand RMAN script. 741
  107. Disks missing from a HyperScale node are being shown as healthy in admin console. 735, 736
  108. Index backups may be retained on media longer than required. 728, 729
  109. Performance enhancement for online crawling jobs. 727
  110. Index Cache may go offline. 714, 716
  111. HyperScale node may hang with "kernel: Out of memory" error. 714, 716
  112. Oracle OnDemand backups may fail for version 10 clients in a version 11 CommCell. 713
  113. Enhancement for MAC Edge Monitor app to support SAML login. 700
  114. Unable to associate a default plan or remove an existing default plan from admin console 695
  115. Exporting / Saving table data as XLS may save an empty file. 688
  116. Snap mount on AIX may fail with error "can't find log for volume group." 676
  117. Hyper-V live sync fails while merging recovery disks with error disk merge is pending for virtual machine 675
  118. Live sync jobs may not complete. 672
  119. Backup Copy from SnapVault may not select all jobs. 671
  120. Enhancements for Exchange Mailbox Entity extraction. 658
  121. Exchange Database live browse may not show deleted mailboxes. 657
  122. File System backups may fail during file scan on on Windows 2003. 656
  123. Enhancement to support virtual machine file search and restore and download from Admin Console. 655, 660
  124. Enable global search in adminconsole 645
  125. Enhancement to support AIX 5.2 32-bit. 648, 649, 650
  126. Browse on reference copy client may fail if the source client is deleted. 640
  127. Selective copy may not pick all jobs when "Prevent multiple copies of job across selective copies" is enabled. 636, 637
  128. Transferring a user's ownership rights to another user may fail. 632, 633
  129. Saving health report as PDF may not work. 628, 629
  130. Health Report embedded in E-mail may be distorted. 628, 629
  131. Exported web console Backup Job Summary report may include duplicate jobs. 623
  132. Analytics jobs may fail when run as a non-admin user. 609, 610, 611
  133. SMTP address of AD users are shown at the default log level. 609, 610, 611
  134. DDB Verification job may go to pending if partially modified index files are present in the chunk. 606
  135. Enhancement for versioning support in virtual machine delayed cataloging. 600, 604
  136. Cleanup Health Report may show deleted Client groups. 597, 598, 599
  137. Data Aging may fail with error "duplicate key in object 'dbo.#IndexingAFToKeep'" 590, 591
  138. Amazon VSA snap backups, restore and live browse are slow 585
  139. VMware virtual machine restore may fail via NBD transport when the VM has a large number of disks. 584
  140. CommCell Console may not sort "Attempt Start Time" column in chronological order. 580
  141. Browsing from "VMs and Templates" may not list all VMs on Huawei FusionSphere. 577
  142. VM owner detection may not work. 576
  143. AWS Snap backup copy job may fail with error 503 'Request Limit exceeded' 574
  144. Enhancements for file level restore from delayed cataloging. 572
  145. Retrieve new subclient mailbox information during restore to my inbox option 566, 567
  146. SharePoint backups may fail with error "InitializeComUtils() - Failed to initialize managed logger." 562
  147. Duplicate BIOS Guid may cause VSA backups be associated with the wrong client. 554, 556
  148. Xen Storage Repository browse may fail for V9 clients with. 548
  149. Enhancements to hide infrastructure resources from tenant administrators. 534
  150. LiveSync to Azure may fail if the VM size is set to "automatic." 523
  151. SharePoint Online out-of-place Restore for some lists/libraries may fail. 522
  152. VMs that failed in snap are not marked as failed in backup copy. 512
  153. Hyper-v Intellisnap Backup copy jobs may hang with "Disk info list object is empty" 512
  154. Vault Tracker Report may not be sent as an e-mail attachment. 503
  155. DB2 restore job may fail when "Use latest backup image" and "Leave in Roll-forward pending state" options are selected. 502
  156. Restore from an Isilon file server may restore more files than expected. 495
  157. Enhancement to support IBAN in SDG app. 498, 499, 500
  158. Azure virtual machine backup may fail with a "request timeout" error. 489
  159. Greenplum database backup may fail. 482
  160. Enhancement to allow specific Greenplum databases to be added as subclient content. 482
  161. Oracle 12C snap clone creation may fail. 482
  162. Enhancement to support NFS volumes for Oracle cross platform migration. 479
  163. Oracle RDS migration work flow job may fails when resumed. 479
  164. Browse and restore may fail because of an index playback failure. 471
  165. Live Sync may fail when disk filtering is enabled. 469
  166. NDMP Snap Restore to Windows/UNIX client may fail if a firewall is configured between the MA and destination client. 466
  167. Media export fails with error ''Failed to export media from library'' when the media location contains non-ASCII characters. 457
  168. Admin Console is not properly localized in Spanish. 431, 434, 441
  169. SQL Management Studio add-in enumeration of servers is not limited to the rights assigned to the logged-in user. 446, 447
  170. Enhancement to allow users to delete mail from Outlook ContentStore email viewer. 433, 439, 445
  171. SharePoint Online restore may not restore all documents. 427
  172. SharePoint Online restore may fail if there are renamed columns. 427
  173. Oracle incremental backup may fail for selective online full subclient with a customize script. 426
  174. Enhancement to support CVJOBID variable in the additional setting "sCustomBackupPieceFormat" 426
  175. Log only backup for Oracle RAC selective online full subclient may report channel failure errors in RMAN output. 426
  176. Oracle RAC backups on HPUX11.23 may fail with error "No more allocated streams are available" 426
  177. Index server client backup might not start when a cluster is used as Media Agent 425
  178. Browse may fail with error "index not up to date". 424
  179. Synthetic full may fail because index is under reconstruction. 424
  180. Clients may not be visible on WebConsole "My Data" page when classic security is used. 423, 428
  181. Users may not receive an error when attempting to edit the Exchange Mailbox plan when they do not have the necessary permission. 416
  182. Top 25 Growing Clients report shows incorrect information. 413, 414, 415
  183. HyperScale network configuration may fail. 405
  184. When a corrupted ddb/index cache drive is replaced on a HyperScale node the new configuration may not consume the entire available drive capacity. 405
  185. CaseManager job may fail for data migrated from a PodCell as part of GRC setup. 400
  186. MSP admin users may experience a delay logging in. 397, 398, 399
  187. Browse from copy precedence is taking longer time. 394, 395, 396
  188. Sharepoint site restore may fail when lists contain non-English characters. 384
  189. Sybase temp databases are not being restored into the default temporary database group. 380
  190. Subclient content with "Archives" may also backup "Email Files". 375, 376
  191. Backed up client preview is not working 372
  192. Support for email and sharepoint data source review 372
  193. IntelliSnap backup may fail with error "authorization required" for Isilon OneFS file servers configured with Cross Site Request Forgery validation. 367
  194. ContentStore Mailbox may reject emails forwarded from Office 365 366
  195. Exchange Mailbox restores may be slow. 365
  196. Users with limited capabilities are able to see all libraries in classic reports. 355, 356
  197. Index restore jobs are visible in AdminConsole. 351, 352, 353
  198. All VMs will be excluded during discovery by host with filters 336
  199. Edge drive offline backups may go to pending and cause delays in sync. 333
  200. CVD process memory consumption may grow over time causing backup throughput loss. 330
  201. SIDB reconstruction may fail. 329
  202. Storage and subclient policy may not be assigned to a client during installation from a custom package. 326
  203. Installation of a CommServe using an existing DB dump may fail during database upgrade phase with error "Product [CommServ] is not supported." 325
  204. Export to CSV from reviewset may fail. 319
  205. VMware-OCI Conversion may fail to regions other than us-phoenix 315, 318
  206. Instead of eu-frankfurt-1, uk-london-1, it was showing wrongly with prefix as us-* 315, 318
  207. privateKeyPassword field doesn't reset to empty, once it is set 315, 318
  208. OpenStack Full VM Instance restore may fail with error "The resource could not be found." 311
  209. Exchange mailbox client creation from AdminConsole may create all types of BackupSets. 309
  210. IBM i restore job may report many files as failed. 305
  211. Logical files are linked to source library during IBM i out-of-place restore. 305
  212. NAS Isilon multi-stream backup copy job may go pending with error "Failed to update the chunk information to the archive manager on the CommServe." 295
  213. Enhancement to support File System iDA on AIX 5.2 TL4. 294
  214. 'As Built Guide' option is not available in single commcell environment. 279, 285
  215. Linux CVBF driver support for debian9 280
  216. Linux CVBLK driver support for debian9 273
  217. Exchange Database discovery may not complete if there are stale database entries in Active directory 275
  218. Virtual Server Agent backups not running if VM client has backup activity disabled. 271
  219. VM conversion from Hyper-V environment to Azure may fail with error "Unable to write data to the virtual disk". 270
  220. Tenant Admin is unable to run Exchange Mailbox content indexing jobs. 274, 276, 277
  221. Running jobs are not transferring data. 266, 267
  222. Edge sync may not sync folders. 263
  223. Recall from cloud archive storage may fail with "No client available." 261, 262
  224. Unable to see VM details in Synthetic Full backups 259, 260
  225. CVODS process may crash while running File Level Analytics report from commcell console. 256
  226. Enhancement to support HBase backup and restore. 251
  227. Enhancement to allow restoring to a PST on a access node in a different domain. 249
  228. Enhancement to use multiple OneDrive Apps when throttling is encountered 248
  229. OneDrive restore to disk may fail for some files. 248
  230. Multi stream synthetic full job may go to pending on Linux MediaAgents. 245
  231. Enhancement to support Entity Extraction for Exchange. 241, 242, 243, 244, 246
  232. Enhancement to support backup and restore of MongoDB. 237
  233. Enhancement to disable wrapping of csv data with quotes. 233, 235
  234. With CHAP username provided and no password, snap operations are failed by the Nimble engine 231
  235. For revert, CHAP authentication fails when source volume is enabled with CHAP auth 231
  236. Block level backup copy of ASM devices fails. 199
  237. Customize script + Selective Online FULL subclient fails for INCR jobs 199
  238. ArchiveLog backup is not backing up control file when autobackup is disabled. 199
  239. Oracle Table level restores from Block level copy would fail if target database is down. 199
  240. Commserver may lose firewall configuration when adding new gateway from Admin console. 185, 187, 188
  241. Oracle RAC snap backups may fail with the error "ORA-19625: error identifying file +DS<path>.dbf" 182
  242. Compliance Search may show deleted or aged e-mail. 181
  243. Some exchange delegated mailboxes may not be visible in WebConsole. 170, 171
  244. Snapshot name wrongly set for NFS and LUN while checking the status for Tegile Snap Engine. 169
  245. NFS share subfolder check wrongly compared with root of the share with Tegile Snap Engine. 169
  246. Linux CDR/FSDM driver support for debian9 168
  247. SQL Availability Group Client may be populated with incorrect SQL clients. 165
  248. Exchange DAG client creation may list proxy clients that the user does not have permission to see. 162, 166
  249. DDB reconstruction may fail with a "state file corruption" error. 157
  250. Salesforce backup may fail when there are a large number of attachments. 156, 160
  251. Virtual machine may not boot after restore. 155
  252. VSA backup jobs may go pending if VM archiving is enabled. 151
  253. Planed failover of CommServe does not work as expected. 132
  254. MySQL backup copy job may fail error "File Scan initialization failed" 129, 130, 131
  255. Legal Hold workflow may not process all the items. 112
  256. Add cvfwd.exe to firewall exclusion list for upgrades 108
  257. Jobs may fail after updating passwords via User Account Management. 100
  258. Service pack install on machines running data analytics service may take a long time. 57, 59, 63
  259. SAP Oracle App-free restores may fail on windows with error "restored file mode is invalid." 55
  260. AWS snap file level browse may fail. 8
  261. Virtual machine restore from backup copy may fail. 12
  262. AWS instance restore from snap may fail. 11
  263. Non recursive restores can have high number of skipped or failed files 66799
  264. New support to allow Salesforce dependent object exclusion selection 67003, 67050, 67086, 67113
  265. Sharepoint Online backup may fail with the error "The path is not of a legal form" or "There is not enough space on the disk" 67119
  266. Sharepoint Online restore may complete without restoring some documents. 67119
  267. To enable mounting of NetApp snapshots of cluster disks back on the source cluster host 66937
  268. Non applicable options are shown for RDS databases. 66766
  269. BlockLevel backup copy job might fail on job restarts 66861
  270. CVD service may not stop. 66846
  271. In NAS Isilon multi-stream backup copy job, one stream may wrongly invalidate AFile from other streams and fail intermittently. 66835
  272. Restore and Data Verification jobs may take long time to complete if Gluster MPs are involved. 66834
  273. Oracle test clone is removed after 90 days even though the expiry time is set for 999 days. 66970, 67020
  274. Remove permission option is not there in resolve risks 66731
  275. Exchange DB backups may not start. 66967, 67017
  276. SQL restore fails with error "-: Failed to fetch number of streams and array of Arch Files with error [1]" 66964, 67014, 67065
  277. 1)PostgreSQL data directory is in a symlink path, run block level backup 2)Stop server, delete DATA and WAL dir, symlink is not unlinked. Do a full instance restore 3)Restore fails in log restore phase, as it fails to create symlink & no proper JPR . 4)Unlink the symlink and resume the job, it completes by creating the symlink 66804
  278. NDMP subclients consume a large amount of index cache space 66942
  279. Tapes being requested for synthetic full because stubs' data is present in Tapes. 66389
  280. Browse might show partial results because synthetic full playback has not completed. Synthetic full Index Playback in onepass subclients might be slow if jobs with huge number of files were killed in SP7. 66389
  281. Virtual Server Agent backups with many backup streams may take longer time to finish. 66825
  282. Jobs on primary are held by REQ_BY_DATA reason for the secondary copy jobs that are not copied and marked disabled. 66447, 66548
  283. Jobs on primary are held by REQ_BY_DATA reason for the secondary copy jobs that are retained and having same days retention as Primary 66447, 66548
  284. Job on Primary are held by LOG_RULE due to jobs on Mirror copy 66447, 66548
  285. Tapes may get marked as aged wrongly 66441, 66543
  286. Tape to tape copy jobs may get interrupted by other jobs. 66441, 66543
  287. Option to limit parallel backup copy jobs that can run on a given storage policy 66445, 66546, 66618
  288. Web Console - My data page is not listing the clients 66479, 66571
  289. Restores may not happen LAN-free if client to MediaAgent pairing feature is enabled. 66526, 66607
  290. Dash copy job may wait for data to process even when there is no reservation currently active. 66529, 66610
  291. Jobs may not be pruned from disk as expected. 66778
  292. SAP Oracle browse start time and end time are not displaying correcrly if client and Cs are in different time zone. 66238
  293. SAP Oracle subclient with limited user caplinity(without storage policy assiciation) is resetting data streams when user saves subclient properties. 66238
  294. Need Mongob DB client creation option from new client dialog 66238
  295. Intelli snap panel is not applicable for IBM-i subclient policy 66238
  296. CVFailover communication issue between nodes after TLS 1.0 is disabled 66382
  297. Customer is seeing empty backuspet in webconsole after logs in 66350
  298. SBT restore from AppFree restore disk media does not require Commserver connectivity 66338
  299. Add Job ID variable to customer backup piece format 66338
  300. Script to get list of entities for which password needs to be updated and an option to update affected passwords. 66330
  301. Robustness fixes for HyperScale. 66314
  302. Enhancement to apply Unix group and permissions while adding packages from GUI. 66299, 66407
  303. New Linux File System backup clients do not work on SAP HANA appliance running SuSE. 66405
  304. 1-Touch restore may result in BSOD upon completion if AD is installed on non-system drive 66275
  305. Restore to disk as original file failing for some files. 66269
  306. sometime CVD process is not going down gracefully when stopping Commvault services 66267
  307. This enhancement lets the user download files from Admin Console for vmware in the background and shows localized error messages. 66180, 66686
  308. Added a setting to hide deconfigured FS clients in the Web Console My Data | Computers page. This setting defaults to false. 66257, 66681
  309. Archive capacity may incorrectly be consumed for backup jobs when retention settings are made at the subclient policy level. Exchange mailbox (classic) is excluded from archive calculation 66466, 66563
  310. Unable to view libraries after new library configuration. 66446, 66547, 66651
  311. Remote cache configuration GUI may throw exception 66245
  312. NAS restore fails for non-dedup restores via cloud recall workflow 66443, 66545
  313. UNC path Win FS iDA scan failure with error - There is nothing to back up. A possible cause is that none of the subclient contents exist 66243
  314. Changes to support Avamar, Networker and DPM 66242
  315. Replication groups may be shown to unauthorized users in Admin console. 66437, 66536
  316. Restoring a VMware vCloud VM using AdminConsole may fail. 66025
  317. Backups of VMware VMs on datastores with a space in the name may fail on vSphere 6.7. 66094
  318. Backups of VMware template vms may fail when hotadd mode is used. 66094
  319. Enhancement for drill-down from custom dashboard. 66111
  320. 1. VSA EC2 instance snapshot backup may be slow if large number of instances selected in subclient. 66095
  321. Snapshots may be left behind on AWS console, with status as "Failed to delete" on Commvault. 66095
  322. CvMountd may crash during snap backup of Stopped Amazon RDS instances. 66095
  323. Disk filters added from the command line may not work as expected for a VMware VM backups. 66083
  324. Edge drive might not sync all the data 65943
  325. GRC export job may take long time. 65895, 66042, 66104
  326. New GRC export won't be triggered if there is already past successful export which is not merged. 65895, 66042, 66104
  327. Use current running export job for the new import job if the previous import job is killed. 65895, 66042, 66104
  328. Space reclamation job may not complete. 66013
  329. SharePoint Farm backup may fail if a third party RBS provider is configured. 66035
  330. When destination machine boots post restore, the IP address settings mapped to each NIC might be changed compared to the backed up machine 66009
  331. Reset userGUID 65983
  332. SharePoint offline mining restore job may fail if one or more documents could not be restored. 65979
  333. Restore from SharePoint offline mining is not honoring the "Unconditional overwrite" causing a child site to be created. 65979
  334. User has to first create the fields in the destination data source for them to be visible in data blending window. 65966
  335. New feature to add Oracle/MySQL/PostgreSQL agent on Amazon pseudo clients. 65898, 65946
  336. Security enhancement in web service database connectivity 65934
  337. Customer requested for a report which will compare the month over month change in usages, that are shown in the Royalty Reports 65919
  338. Enhancement: New Metrics Restore Job Summary report to show restore and restore validate jobs. 65917
  339. Requirement to add an option to Queue jobs if other conflicting jobs found from Client Group level 65810
  340. Robustness fixes for HyperScale. 65783
  341. Full Backup job for One Drive attempts to run an Index Restore job. 65775
  342. Web Console - AllowLaptopClassicSecurity key not working for My data page 65761, 65763
  343. If Data Classification scan fails to complete due to low free space on the volume causing the DC DB processing to get interrupted, this may not be updated in the GUI clearly 65757
  344. Pending jobs metrics report is not showing waiting and queued jobs. 65687
  345. During Synthfull the fsrestorehead readers are getting stuck and eventually cvd crashes. 65683
  346. disk does not map properly during restore. error in network configuration during restore 65711
  347. Requirement to provide a custom alert for Aux copy when it fails for N times. 65656
  348. If mount takes a long time to finish, browse may fail in the end 65637
  349. - AdminConsole doesn't show any inherited customization. - Web Console shows the MSP customization. 65595, 65630
  350. Automatic method for granting permissions to a schedule (created by tenant admin) to tenant admin group 65719, 65734, 65739
  351. When there are two schedules with blank names in the same schedule policy, and when we try to provide a name for one of the schedules, the other schedule is deleted 65719, 65734, 65739
  352. Not enough performance counters to trace the time spent during the file scan phase 65621
  353. LiveSync Direct Failback DataMover and vsvrst changes 65358
  354. Performance enhancements for OneDrive backups. 65574
  355. Utility to cleanup archive files without valid data. 65556, 65557
  356. Copy type value returned in get storage policy REST API request is wrong 65554, 65555
  357. Enhancement: A new Custom Dashboard to help monitor DDB Operations across Commcells. 65544
  358. DDBPerformance Report does not have default sort order. 65544
  359. Notes Database Scheduled Incremental Jobs on the Transaction Log Subclient also Start a Job on the Default subclient 65540, 65543
  360. Upgrade to V2 on clients with MA's less than SP8 results in "Index Update failed" errors 65536
  361. Backups does not allow volumes with 4K sector size. We cant not configure Application extent size. 64036
  362. IBM i restore job is reporting many files as failed. 65475
  363. Logical files are linked to source library during IBM i out-of-place restore. 65475
  364. Hyper-V full VM restore using Linux MA fails due to case mismatch of VolHdr disk file name 65450
  365. Attempt to deconfigure library fails after long time. Logs show lots of unrelated db procs timing out. 65508, 65516
  366. In GRC job, we may not get access to newly added mount paths in GRC cell. 65484, 65511
  367. User would be able to view associations to schedules even when subclient is in deleted state. 65426
  368. Improve performance on retrieving SLA results for web console and metrics reports. 65431, 65433, 65561
  369. Disk Library Growth report shows incorrect percentage of free space when some mount path is not writable. 65431, 65433, 65561
  370. This enhancement allows download requests to be processed in the background even if the user navigates between different pages. 65371, 65524
  371. Workflow fails when encountering invalid character in the path selection for restore (Exchange Database) 65410
  372. If external OCUM job is running on a dataset, NetApp 7mode snap auxcopy doesn't wait for the external job to complete. This may cause errors when copying new snap jobs. 65336
  373. add support for SEGY file index 65233
  374. New Feature: Workflow to check readiness of 1-touch enabled linux client 65362
  375. Layout gets wrong and Card component/Charts are not properly rendered while the report is exported as PDF or HTML. 65315
  376. Multiple value filtering in chart interactivity is not working as expected when custom groups are defined. 65315
  377. "No backups" alert criteria is incorrectly triggered for subclients where 1-Touch backups ran. 65319, 65324, 65412
  378. Oracle test clone is removed after 90 days even though the expiry time is set for 999 days. 65308, 65311
  379. A change in Nimble Array's IP results in failed backups for corresponding snaps 65303
  380. Enhancement: New custom report Client Group SLA. 65289
  381. 1-Touch and Command Line jobs are not included in the report output. 65298, 65304
  382. Large recall downloads that are requested from a Celerra Filer client may fail. 65247
  383. Clients having multiple default Backup set cannot be deleted from GUI 65241
  384. add function to support large text file content index 65236, 65242
  385. Storage account may not be found during live sync operations. 65239
  386. Enhancement for adding "Show FET for VSA and other iDAs" option to Chargeback report. 65203, 65210
  387. Unable to delete migrated GDSP 65190, 65205
  388. Agent type not mapped correctly with the selected agent type of schedule policy in schedule policy information report. 65144
  389. Enhancement to show Latest SLA Per Client Group in Average SLA custom report. 65143
  390. SQL database discovery may fail when a very long password is used. 65129, 65131, 65133
  391. When option "Check Archive Bit during Backups" is enabled backups might take a long time in PostOp phase 65125
  392. Sometimes CDR action may result with failure and causing workflow completion with errors. 65078
  393. Move mountpath job may fail with read/write errors on UNC paths 65053
  394. Email of AD groups not getting updated 65064, 65068
  395. Use Isilon OneFS APIs to calculate the volume size. 65007
  396. If the File size > 320GB, it will fail to upload to S3 for native file because the part number is limited to 10000. 65007
  397. Add reg keys sCloudGlobalSendHourBucket and sCloudGlobalRecvHourBucket for Cloud Throttling schedule. 65007
  398. Oracle third party backups will to merge jobs when SID is longer than 8 characters or RAC unique db name is longer than 12 characters. 64999
  399. Enhancement: New Metrics server view for DR job details. 65043, 65046
  400. Backups may fail when some large objects are backing up. 65001, 65031
  401. Unable to export Azure SQL db if it takes more than timeout time to finish. 64979
  402. Client owners are missing for a few clients in DB 64951
  403. SharePoint Farm level backup may fail on non-English locale. 64916
  404. For SQL DB Archiving, process is timed out if driving table has large row count. 64914
  405. Large number of failed files reported due to transactions on the server after the collect file is generated. All failures are error code 2: File not accessible. 64910
  406. Enhancement: A new Custom Dashboard to help monitor DDB Operations across Commcells. 64907
  407. DDBPerformance Report does not have default sort order. 64907
  408. Disk Volume Reconciliation is showing errors accessing data on mount paths 64858
  409. CVDistributor process might crash intermittently on some linux machines 64812
  410. Log backup of a database is getting converted to full after a database with same name from different instance is restored with different name on the source instance where backup is running. 64800
  411. This enhancement lets the user download files during guest file browse for vmware on Admin Console including the ability to see current download items being processed. 64617, 64672
  412. CCM merge may fail if GACP copy has extended retention is enabled on source. 64801, 64803
  413. Added support for IBM Cloud Object Storage. 64732, 64751
  414. Filescan on incremental after synthfull/true up takes a long time when compared to regular incrementals 64798
  415. Intellisnap backup for Isilon UNC subclients fails with "authorization required" error for Isilon OneFS file servers configured with CSRF validation. 64779
  416. Data is not aging off of mount paths if they have chunks from NAS jobs 64792, 64799
  417. Restore from Copy (with Fast Copy or inline Copy option enabled) is Failing if the Aux copy was run for a NAS Backup with Restarts. 64792, 64799
  418. The peak sizes in Jul, Aug, Sep, Oct and Dec of 1017 and Jan 2018 are incorrect. 64770
  419. Fix stored procedure detecting backups done outside of DR 64767, 64769, 64804
  420. Oracle backups get converted to full when Activity is disabled and enabled 64763
  421. zfs snapshot of root volume is not skipped 64753
  422. FileScan memory usage is huge when there are more snapshots 64753
  423. Installation of temporary client may fail when there is a firewall between the client and cs 64728
  424. 1-Touch restore of a v10 backed up client using v11 client may lead to BSOD when booting. 64728
  425. Static IP may not be set after 1-Touch restore 64728
  426. Gateway may not be set after 1-Touch restore 64728
  427. Entity Extraction does not happen properly when Unicode characters and special characters are present in the document. 64726, 64731
  428. Configuring SCOM crashes EvMgrS 64722
  429. UNIX filesystem backup fails to backup files if Snap Backup and Backup Copy use different proxy machines. 64717
  430. Web-console support for the Seismic File System Connector 64668, 64676, 64679, 64698, 64700
  431. add support for SEGY file index 64638, 64651
  432. Oracle Instant Clone overwrites user supplied PFILE with auto created PFILE. 64636
  433. Registering a client from the CommCell console may fail. 64623
  434. Loss of control process : ifind 64622
  435. Sometimes new snap backup jobs are not getting picked by free streams by auxiliary copy job. 64639, 64645
  436. New feature-Add the message changes needed for entity extraction on backed up data. 64577, 64580
  437. Laptop jobs may not run correctly 64615, 64621, 64663
  438. SharePoint Document backup with Direct Database Access (DDA) enabled may fail. 64609
  439. Backup job may fail with the error - "Current backup is Deduplicated and is attempting to use the same writer resource" 64548
  440. Linux file system snap backup or backup copy of EMC PowerPath devices may fail. 64542
  441. Able to create 2 different backed up datasources with same name under a project 64562, 64566, 64584, 64594
  442. No support to run CI job for a particular set of user mailboxes when email datasource is created 64562, 64566, 64584, 64594
  443. "Start data collection" starts live crawl job for a backed up datasource 64562, 64566, 64584, 64594
  444. Creating datasource from NAS client is failing 64562, 64566, 64584, 64594
  445. Export to Web Server feature is not honoring preference set from search administration site. 64526, 64527, 64531, 64551
  446. SQL logs may contain some errors. 64522
  447. Creating multiple backupsets at the same time may fail with the error "Failed to create new subclient." 64520
  448. Enhancement : Add columns to show "Total Data to process, Total Data Processed and Total Items Processed" in job controller. 64475
  449. Excessive logging may fill up the system drive of SQL clusters. 64469
  450. Enhancements for Exchange browse tool. 64464
  451. Adding tool to aid performance enhancements in EE 64459
  452. Enhancement: A new Custom Dashboard to help monitor DDB Operations across Commcells. 64443
  453. SQL Differential backups are taking longer than FULL to complete 64442, 64444, 64463
  454. Backup Job Summary report states "files failed to back up: unable to get file list" for jobs. 64436
  455. QLogin.exe errors out with ''Entry Point Not Found'' on windows server 2003 R2 clients. 64417
  456. Enhancement: New Metrics server view for DR job details. 64393, 64398
  457. Job details report on the metrics server immaturely prunes valid jobs that are older than 26 months. 64392, 64397, 64447
  458. Metrics Collection query 220 might fail on Commservs with SQL Server 2008. 64392, 64397, 64447
  459. Web console Job Summary report is not showing incremental jobs of MySQL. 64372, 64378
  460. Enhancement: Storage Policy filter is added to Web console Job Summary report. 64372, 64378
  461. New Feature - To SCG to List Clients based on Operating System 64341, 64343, 64344
  462. Enhancement to remove requiring a User Account with Read only access to LDAP for permission and authentication when configuring Active Directory in Commvault 64320
  463. DB2 backup may fail on windows. 64318
  464. Processing of the cloud XMLs fail with database errors. 64312
  465. Unmount operation skips detaching the LUN. 64303
  466. Log backup of a database is getting converted to full after a database with same name from different instance is restored with different name on the source instance where backup is running. 64287
  467. Restore of large db on linux fails. 64287
  468. CVDistributor process might crash intermittently on some linux machines 64280
  469. MySQL MariaDB backup may fail. 64266
  470. live browse will fail for data disks if instance created from image 64262
  471. IntelliSnap ETERNUS snap mount operation may fail for VMware agent if the ESX host has IPv6 enabled. 64259
  472. Oracle backup on AIX may fail with channel allocation errors. 64258
  473. Office365 mailbox backups may consume high memory. 64256
  474. Media retention end time may not be updated for media with only partial jobs. It may cause vault tracker to show return date as "NOW" for the media. 64234, 64236
  475. Predictive Reports do not run from either the Remote Managed Services report or the predictive report. 64220
  476. Creation of SQL AG instance may fail. 64213
  477. When adBackup failed to send index files to MA, it does not report the error. The backup job status is reported as successfully completed, but the backup set is bad since the index files are missing. 64205
  478. Enhancement: New Metrics server view for DR job details. 64209, 64214, 64219
  479. Option to configure live sync at backupset level is not available after upgrading to SP11. Customer wants this option to configure live sync at backupset level. 64176, 64177
  480. Synthetic full may drops the files if duplicate CommCell numbers exists 64171, 64172
  481. 1-Touch restores may fail with an erroneous error message indicating the destination and source boot firmware does not match even when that's not the case. 64159
  482. Dash Copy job with pick new jobs enabled might fail with SQL during repopulate 64130, 64131
  483. Auxiliary Copy fallen behind alert may not get cleared even after the Auxiliary copy has caught up 64126
  484. Azure inplace restore may fail with error "changing property 'sourceUri' is not allowed" 64107
  485. Unable to run backups against client due to missing license 64085
  486. Incorrect geolocation is reported for the client. 64074
  487. Clients with 1-Touch Recovery Enabled custom report do not consider subclient policy settings. 64072
  488. IntelliSnap 3PAR Inline Replication job may fail in synchronization phase 64027
  489. Media Mount Manager service (CVMA) may be terminated abnormally sometime while processing IntelliSnap 3PAR Inline Replication 64027
  490. Existing scheduled Job Summary reports are listing all Storage Policy copy names under "Report Criteria" which is sent to all customers and is causing a security breach 64009
  491. This enhancement lets the user download files during guest file browse for vmware on Admin Console. This form supports multi-file/folder(s) download. 63991, 64011
  492. Enhancement: Calendar Job Summary report to have total and completed jobs columns in two separate columns to make it more CSV friendly. 63989
  493. Inactive users report may have incorrect users. 63968, 63972, 63974, 63977, 63986
  494. Analytics reports shared with users are not accessible 63968, 63972, 63974, 63977, 63986
  495. Oracle backups may fail on SunOS. 63944
  496. ACL change on pair's source folder does not replicate to destination 63950
  497. There is no option to enable/disable schedule or schedule policy in Admin console. 63911
  498. Backup on analysis engine or AWS or AZURE will fail with no resources allocated error on SNAP OEM. 63900
  499. Content Indexing errors for deleted subclient 63906, 63908
  500. Explorer copy of stubs residing on a folder that has the folder quota set, can cause the copy of the file to be an incomplete copy of the file. 63882
  501. VM Backup report doesn't show subclient name for excluded VMs. 63876
  502. Database plan creation is falling in case schedule modified 63842, 63843
  503. DASH auxcopy may fail with DDB record not found errors even when records are there. 63796
  504. Full reconstruction jobs may fail due to read failures or failure to process chunk metadata. 63813
  505. A DV2 job may go pending if partially modified index files are present in the chunk. 63827
  506. Unmount operation may not re-scan the HBA on a clustered ESXi host. 63825
  507. Enhancements for space reclamation job with reporting option and incremental support. 63819
  508. When two clients have sql server instances with same name, it's possible that AG property with wrong client id is saved to csdb, and thus AG job would fail because replica saved is wrong. 63582, 63583
  509. Guest File restore may fail for files or folders with special characters 63690, 63738
  510. We need to create 2 datasourcetype, email and dbanalysis 63742, 63749, 63800, 63802
  511. Allow export to web server feature to be configured from search administration site 63747, 63754, 63784, 63790
  512. Additional command line backup job may be invoked after Online DB2 command line backup job. 63774
  513. Sometimes, clicking on an extracting entity in GDPR UI does not highlight it in the preview. 63761, 63764, 63769
  514. If comma is present in the pattern of a custom entity, the extracted entities are pushed as 2 separate entities. 63761, 63764, 63769
  515. Modification time of migrated files may occasionally get bumped up to current 63741
  516. ContentStore jobs fail after upgrading to SP11 when local job results folder is not the default 63755
  517. Enhancement to display ''Number of Streams" in backup job details for all iDAs 63224
  518. Unable to edit job summary report schedule when configured for calendar and Archive\Compliance Archive jobs. 63695
  519. Content indexing job on a GRC commcell may not load balance across multiple nodes of the search engine. 63735, 63744, 63776
  520. Content indexing of synthetic full jobs on a GRC commcell may not complete. 63735, 63744, 63776
  521. Replication jobs might not run for Nutanix Snap engine. 63717, 63726
  522. Jobs may be stuck in the running state. 63684
  523. CvPlink.exe can not be launched from workflow 63677
  524. Oracle backups and restore jobs may store passwords in rman script file and script file may not get cleaned up for long time. 63676
  525. Jobs may not age as expected. 63704, 63713
  526. DDB Data Verification Job on a cloud library may go pending with error "Sfile container file missing or corrupt during data verification job". 63675
  527. default Backupsets without the name of 'defaultDummyBackupset' appear in the Subclient without Storage Policy Association report. 63667
  528. When Oracle instance name is longer than 8 characters, the third party rman backup jobs start failing in job merge. 63666
  529. ENHANCEMENT: To support generation of exported tablespaces for cross platform migration on non-snappable volumes with image copy. 63619, 63659
  530. RMAN image copy backup fails in 12cR1 some setups if dbname and dbuniquename are different. 63535
  531. Oracle OSC archivelog backups should monitor the Flash recovery Area usage if the archivelog location is Oracle Flash Recovery area 63451, 63611, 63654
  532. Oracle snap backup may fail if the log archive log dest points to the same path as FRA 63451, 63611, 63654
  533. Linux VirtualizeME may not display all disks in the recovery wizard. 63578
  534. 1. If we try to use non-standard port for ODBC interface, backup and restore will be failed. 63573
  535. Upgrading 7z to version 18.5 63568
  536. 1: VSA Agentless file restore may restore files along side the parent folder. 2: Parent folder of restored file has incorrect ownership and permission. 63567
  537. Explorer plugin does not trigger locking of files from windows laptop. 63565
  538. Enhancement - Restriction of commands in python-based CLI for end-users 63558, 63559
  539. Unix Intersystems Cache DB Backup Browse shows nothing after second full backup of a Backup Set. 63557
  540. Unable to Recall/Download stubs using Outlook Addin with error "Download Failed" 63551
  541. Case Manager job support for searching files based on user access. 63544
  542. Analysis services backup failed with no resources allocated. 63542
  543. CDR not replicating after enabling nExtraSockets in firewalled environment 63524
  544. Find Feature does not work in Flat View of a Browse and Restore operation when there are multiple pages of results. 63517
  545. Corrupt links written to chunk metadata causing failures during recon. 63513
  546. Backup copy jobs for FS under NAS might try to backup deleted items and report them as failed. 63508
  547. Linux guest VM IP address customization support for Live Sync (VMWare) 63333
  548. Duplicate Mailboxes in browse. 63425, 63461
  549. Keyword facet is disabled by default 63326
  550. DR backup to cloud may fail when a proxy is configured to connect to the internet. 63457
  551. DASH Copy may fail with DDB record not found errors even when records are there. 63413
  552. VSA jobs that are committed when the maximum number of attempts is exceeded may fail to browse and restore. 63420
  553. Admin account on commcell console no longer shows master role 63419
  554. Can't save Oracle subclient properties if user has no permission on the Storage Policy. 63321
  555. Schedule Policy shows 0 associated objects even though it has a client associated to it 63395, 63406
  556. OneDrive group user discovery is slow. 63384
  557. infinite loop while downloading a OneDrive file 63384
  558. Failed items are not replayed 63384
  559. Killed the first Full backup and started incremental. But the Job detail shows it's Incremental job. It should be Full backup. 63384
  560. When html source in entered in client description and choosing "HTML" radio button just shows the html source tags instead of rendered content. 63367
  561. Reports Save As/Schedule file may contain some table data at the top instead of the designated place. 63363, 63401
  562. Custom Reports included in health page PDF export have only 2 rows. 63363, 63401
  563. Web job summary report may show incorrect data when exported. 63363, 63401
  564. Text pasted into the client group description is saved with HTML tags. 63343, 63348, 63352, 63372
  565. Allow to Skip Exchange database discovery by using reg Key 63347
  566. add support for SEGY file index 63332, 63334
  567. new feature - VM customization of Linux VMs for VSA Live Sync 63331
  568. Large CI jobs may fail if TO, CC fields have large list of recipients. 63325, 63327
  569. Region based VM discovery is failing for Azure VMs in few regions. For e,g, Canada Central, South India 63324
  570. Cloud backup may fail for Azure File Share if the number of the files is greater than 1000 in one folder. 63323
  571. Getting Glacier inventory result may fail in CloudTestTool.exe because the huge number of files. 63323
  572. ISAM Errors might be seen during playback. 63322
  573. LiveSync to ARM fails during NIC configuration 63319
  574. 1. When VDC_Complete command enabled, we get the error message in Windows Application log. 63314
  575. A delegated user cannot see email folders for a mailbox in the web interface 63298
  576. Delegate collection for mailbox fails when mailbox DN has '/' character in it 63298
  577. Exchange Database IntelliSnap process unable to be killed 63297
  578. File Scan may crash during a windows file system backup of a cluster volume. 63295
  579. HANA backup jobs using client and client group schedules may fail with invalid store key errors. 63283
  580. Jobs may go pending after DR restore. 63267, 63270
  581. There is a possibility that critical fields entered might be stored in config file without encryption 63242
  582. Fixes for issues in Custom dashboard feature. 63241
  583. Recovered stubs on XFS may have an incorrect access time. 63237
  584. Exported web console Backup Job Summary report may include duplicate jobs. 63233
  585. Recall might fail with PL_FS_READ_ERROR when there was network error between MA and CS 63208
  586. Entity Extraction job for backed up data failing. 63191, 63193, 63204
  587. Lndb Tr logs replay may fail when linux filesystem on jobresults directory is different from that of TR log directory. 63133
  588. Enhancement to automatically unpicking job from Backup Copy on failure for Block level backup based on an additional setting. 63151
  589. High CPU, memory usage in file activity anomaly detection 63120, 63147, 63177
  590. When Incremental is run in parallel with Syntheticfull or if we are using Latest cycle in Index key we may report index upto date when its not. 63109
  591. Clicking on scheduler icon from commcell console takes lot of time to display schedules. 63126
  592. The Exchange Online index server playback sometimes fails with the error: "multiple values encountered for non multivalued field". 63080
  593. Health Cleanup Report is shown Mount Path is offline but there is no Mount Path offline 63060
  594. Index playback may fail 63043
  595. This enhancement lets the user download files during guest file browse for vmware on Admin Console. This form currently only supports single file downloads. 62982, 63011
  596. NAS jobs imported via tape catalog may fail in restores. 62988, 62994
  597. Performance enhancement to improve dedupe media read speeds on Unix/Linux MediaAgents. 62958
  598. OSC config has other schedules(laptop plan) for edge configured Laptop clients. 62941, 62943
  599. Added job level option to control collection of granular file information. 62903, 62916
  600. QScript for Hyperscale Log Monitoring Policy Association 62905, 62906, 62907, 62908
  601. Modify hyperscale reports based on comments 62905, 62906, 62907, 62908
  602. User trying to run job immediately via resubmit of existing job with stagger time may not start the job immediately. 62896, 62898
  603. RMS Dashboard: Unable to launch Admin/Backup/Predictive reports from the Summary report page. 62885
  604. SAP Oracle point-in-time Database copy fails with BR*Tools version 7.20 62882
  605. HANA backup jobs using client and client group schedules may fail with invalid store key errors. 62882
  606. CvMountd can crash during source cleanup after mount path move job. 62879
  607. For EMC Celerra NDMP backup, it is recommended to select advanced backup NAS option 'Backup from Snapshot' to back up a copy of the file system which will not change during the backup. Raise an event if the option is not selected. 62866
  608. Externalize icons in Windows Edge Monitor App. 62865, 62868
  609. When a fully qualified domain name (FQDN) was used in the SQL Server alias for SharePoint, the CVSPScan process was failing. 62700
  610. Failing to generate Restore Job Summary Report due to CVODS crash. 62756
  611. The script can be used to remove package records from deconfigured laptops. 62800
  612. Files may be missing from Hyper-V Live Browse of VM with checkpoints. 62782
  613. Admin Console does not show the dashboard with the following error: "Report does not exist or you do not have permissions to view it." 62772
  614. PostGreSQL full backup was completing with errors. 62731
  615. Linux 1-Touch: After restore, partition table label and types might look different than original machine for certain partition tables that have a hybrid MBR 62693
  616. PostBackup Process fails to run with credential errors after subclient properties are saved even when not making changes to the subclient. 62689
  617. Certain streams might back up more data than others when there is a combination of few large files and many small files in the backup content. 62691
  618. Prune of a Content Indexing job might be slow. 62748
  619. Branding support for Mac native package(.pkg only) 62682
  620. SharePoint document backup operations at some sites take more time than expected to complete. 62738
  621. End user is not able to select resource groups during the restore of an Azure stack VM. 62661, 62717
  622. CCM DDB's that do not exist may require resync. 62716, 62721
  623. Error repeatedly occurring in the event viewer Resync of Deduplication Engine [{engine name}] cannot proceed. Reason [Store from foreign commcell]. 62716, 62721
  624. Though backup command RMAN returns success, there are errors related to out of memory in backup.out. The customer wants to detect the error code"ORA-00603" and mark backup job CWE. 62673
  625. Commvault office app is not working. 62642, 62702
  626. Enhancement to rebuild accelerator using IdxCLI. 62450
  627. DB support needs to be added to support billing history custom reports 62612, 62619
  628. Windows System State backup may crash. 62593
  629. GDPR clients may start backup jobs. 62584
  630. Some Europe char may display wrong in email preview 62575
  631. After embedded workflows complete the output is not properly built. 62573
  632. For Incremental Backups, the Scan is performing Full Lustre Filesystem scan of the CvScanDB even though the subclient content is only a small portion of the Lustre Filesystem. 62572
  633. For filenames with special characters, The Full scan fails with subclient content does not exists. The Incremental scan will not backup the files with correct filenames causing in subsequent backups. 62572
  634. When there are hardlinks in Lustre Filesystem, the Full Scan fails during Index rebuilding and the Incremental scan cannot capture all hardlink files. 62572
  635. Full VM restore to Azure stack is failing when job is submitted by end user with permissions to virtual machine only 62569
  636. Restore to Personal Storage Table (PST) crashes when there are attachment property errors. 62567
  637. Backup of Azure managed VMs may fail if the disk name is too long. 62566
  638. Compliance search export operation may not export all selected emails. 62565
  639. add support for SEGY file index 62535
  640. Command "qoperation replication -o resume" may cause an application error. 62561
  641. Log backup of a database is getting converted to full after a database with same name from different instance is restored with different name on the source instance where backup is running. 62558
  642. Restore of large db on linux fails. 62558
  643. Exchange browse tool Journal mailbox support. 62555
  644. AIX Informix agent upgrade from v9 to v11 may fail to create AppBase registry 62548
  645. Backup of common store files fails. 62547
  646. if Web proxy is enabled for requests sent over Internet then all requests to Azure are routed through web proxy even if service end point is enabled at cloud proxy to transfer data over Azure network. This is impacting Azure backup performance. 62478
  647. Import from Exchange Mailbox (Classic) job may slow down 62475
  648. Browse after import from Exchange Mailbox (Classic) job may show two 'Archive Mailbox' folders. 62475
  649. Performance enhancement for DataAging job 62503, 62515, 62521
  650. After upgrading to SP11 permissions associated at the Commcell level are broken 62460
  651. Add items to Review Set in export bulk operation fails 62456
  652. Export bulk operation fails 62456
  653. New Feature: To alert when a job exceeds the threshold set for the pending or the waiting state. 62451
  654. User would not be able to access cloud store from web console. 62449
  655. Filescan on incremental after synthfull/true up takes a long time when compared to regular incrementals 62425
  656. "No backups" alert criteria is incorrectly triggered for subclients enabled with Intellisnap backups. 62429, 62431, 62432
  657. System hangs on accessing mount points under AzureMountPoint folder. Mounted snaps for snap and\or block level job was processed by FS job 62406
  658. Export to CAB or PST or HTML or CSV jobs are getting prevented to be submitted unless restore to alternate location path is registered into the system. 62385, 62393
  659. When there is a firewall between the CommServe and the client, there may be a delay of up to one hour before some operations can be performed on the client. 62364
  660. Resubmitted new job may start running before the failed job is cleaned up and fail to start. 62356
  661. SSTableloader fails for cassandra version 3.11.1.2070 and higher. 62355
  662. We try to stream the data to other data centers during restores in a multi datacenter environment. 62355
  663. Creating on table might fail during restores if the CLUSTER ORDERING has case sensitive column names. 62355
  664. The sstableloader may fail when they find a new unknown property in the yaml file. 62355
  665. Not able to remove CQL and JMX authentication 62354
  666. Early release tags are displaying for PostgreSQL Standby settings and MySQL Extra backup options panel 62354
  667. Enhancement for adding "Snap Jobs Met SLA if Backup Copy is Not Enabled" option at CommCell level. 62274, 62291, 62344
  668. Strike Counts Summary in Health report may show incorrect numbers of subclients, clients and VMs. 62274, 62291, 62344
  669. File level restore of files with reparse points may be reported as failed files 62334
  670. Successful and failed file counts from a file level restore of files with reparse points may be inaccurate 62334
  671. File level restore reports may show files with invalid path (missing colon characters after the driver letter) 62334
  672. File level restore reports may show an entry with an empty path 62334
  673. Firewall configuration on MA hangs Java GUI. 61982
  674. VSA AppAware snap backups in NetApp licensed Commcells are failing with error "App aware backup is skipped for Virtual Machine". 62090
  675. Reconstruct index from the latest cycle of the new CommCell environment. 62325, 62326
  676. Secondary copy may be written with a new baseline when signature generation before compression is configured. 62282
  677. Failure in configuring offline edge drive on laptops activated in shared laptop mode. 62286
  678. Snap backup for Pure Storage snap engine might fail when the volume name is not present in vcenter MOB 62269
  679. Email CI perforce improvement. 62259
  680. Parsing failed due to violation of primary key for metrics query 153. 62256
  681. Recoverability SLA of Health report does not show the latest recovery point for Oracle DB subclients. 62256
  682. New alert to notify when SQL Server backup job skips the database backup operation. 62244
  683. Browse may not return any items. 62229
  684. VSA Restore "Attach disk to existing VM" may fail when using vCloud. 62225
  685. Live sync: snapshots are created on source VM when destination instance is deleted 62218
  686. A-to-Z sorting in workflow drop down while executing workflows from commcell console is case sensitive. Customer would like this to be configurable to not be case sensitive. 62214
  687. Live browse may time out 62202
  688. In some cases, Index Free Restores for deduplication database reconstruction were failing if the CommServe system network host name and the CommServe client host name were different. 62184
  689. CCR 208167 : Colorblind feature for Web UI - admin console 62151, 62155
  690. Storage Navigation item in AdminConsole not visible to Tenant Admins/ Tenant Users / Restricted Users irrespective of navigation preferences set to show items 62151, 62155
  691. Navigation Items shown on navigation preferences page irrespective of setup for the solution/navigation is completed or not 62151, 62155
  692. Sometimes Auxiliary copy job on newly created copies is running with only one stream. 62142, 62149, 62159
  693. List media for older cycle jobs on a latest cycle only Index lists only checkpoint 62141, 62148, 62154
  694. SOAP message response cannot be used in other subsystems like workflow without converting it to .x based XML response. 62061
  695. Enabling encryption on primary copy fails with license error about aux copy encryption license 62127, 62128, 62129
  696. Enhancement: Adding "Last X Days" option to the strike report. 62107
  697. Compliance Search option to restore files with Access Control List information 62103, 62106
  698. View media for Vault Tracker policy may show an incorrect number of tapes. 62088
  699. Enhancement to show "Fallen Behind Jobs" and "Fallen Behind App Size" in "Fallen Behind Secondary Copies" report. 62087, 62099, 62119
  700. Logging on to the CommCell Console might take more time than expected. 62086, 62089
  701. Content indexing optimize operation was running out of disk space. 62059
  702. Resubmitted interactive job may start after some delay. 62064, 62074
  703. DPE & DAE capacity may increase due to Virtual Server backups incorrectly consuming more capacity. 62058, 62073
  704. MSDB will be skipped from OSC even after changing its RM to FULL. 62050
  705. Automatic snap unmount for VSA App-aware application snaps may fail. 62034, 62036
  706. VSA Restore: Incorrect size of application and excessive read time for disks that are not needed to be restored 62029
  707. Commcell Configuration Report is not showing DIPs set on Client Group level. 62021, 62022, 62025
  708. Jobs may not get resumed at the requested time when suspended with Auto Resume Interval. 62009
  709. Unable to share the cloud MountPath with the folder path to the MediaAgent which is part of another MountPath with the same folder path. In terms of the cloud, both might be a different storage place. 62006
  710. Enhancement: Added code for pruning of records in RMReservationRequestHistory table. 62003, 62004
  711. A configuration setting to hide the Computer User Account tile has been added to the Web Console. 61979, 61981
  712. AWS EC2 snap backup may fail for instances with spaces or dashes in tags. 61851, 61968, 61975
  713. AWS EC2 Instance tags may not be restored. 61851, 61968, 61975
  714. AWS EC2 snap backup may fail due to VSBKP process crash. 61851, 61968, 61975
  715. Added support for AWS China region. 61851, 61968, 61975
  716. Filtering by tags applied in review set after upgrade does not work. 61941, 61948, 61974
  717. Metadata collection enabled on subclients that are not snap subclients 61967, 61969
  718. Database insert fails due to invalid object id in snap structure. 61942
  719. Improvement in Content Indexing engine performance. 61933
  720. Linux 1-Touch restore with a generated (UEFI) DVD might restore sparse files as flat 61910
  721. Linux 1-Touch - ability to override disk mapping 61910
  722. Linux 1-Touch : restore will fail if /boot is on lvm. 61910
  723. The admin console landing page is shown when trying to restore SQL databases. 61884
  724. Linux 1-Touch : restored machine's network configuration might be incorrect 61835
  725. Worldwide Storage Resources Summary Report shows same amount Free Space on all Libraries when saved as as PDF or html. 61840, 61844
  726. CVCBT may cause crash while deleting bitmap file. 61837
  727. CVCBT my cause diskmgmt.msc and explorer to deadlock when volumes are surprise removed. 61837
  728. Linux VirtualizeME may fail. 61819
  729. NetApp Virtual Storage Console stops working if the export policy created during NFS snapshot mount operation has permissions with mixed values for "allow-suid" parameter. 61817
  730. New option "Export to Web Server" in compliance search that retains security on file system data. 61336, 61337, 61345, 61600, 61798
  731. Enhancement to export emails (into PST) or files to specified network location. 61336, 61337, 61345, 61600, 61798
  732. Compliance user may not see preview of emails present in a shared review set, 61750, 61752, 61797
  733. List media for older cycle jobs on a latest cycle only Index lists only checkpoint 61753, 61762, 61792
  734. sales force record level restore brings in additional parent records 61741, 61756
  735. infinite loop while downloading a OneDrive file 61744
  736. OneDrive restore fails 61744
  737. CMR: OnDemandInstance support for Oracle RAC 61724, 61729, 61742, 61791
  738. Huawei file server password is logged in CVMA.log file at higher debug level. 61711
  739. Subclient content browse from admin console for HNAS file server just shows the list of file systems. Listing of directories under file systems fails. 61711
  740. Intellisnap backup job for Huawei NDMP subclient fails if file server does not support snapchangelist setting. 61711
  741. SAP Oracle GUI restarted rman log backups might fail to update index for config files when there is connection timeout with MA. 61707
  742. Disk volume size updates may take more time on a MediaAgent because there are redundant calls to check if path is a directory. 61700
  743. Database restores (Application free restore to disk) might report incorrect job status when encountered with MA read errors or when MA services are down. 61683
  744. Enhancement to add custom audit functionality for library, mount path, storage policy. 61679
  745. GUI exception while closing[X] "Add tape Library" window. 61679
  746. In Netapp NAS Snap NRE restore, even though restore was successful, JPR is set with "NDMP Server reported the following error: [DUMP: Write to socket failed]." 61682
  747. Pruning performance improvements. 61709, 61713, 61771
  748. HyperScale network configuration may fail on a server with inactive network ports. 61672
  749. VMWare EMC Celerra Intellisnap backup will fail in prepare phase with error: "Unable to get filesystem information for share <sharepath>" 61656
  750. IntelliSnap support for MEDITECH using Nimble LUNs. 61655
  751. On CS where domainless login is enabled, Snap-User Operation workflow execution fails with login error. 61697
  752. SLA does not discount VMs committed within a Failed VSA backup job. 61675, 61696, 61723
  753. Enhancement for reporting SLA history per client group. 61675, 61696, 61723
  754. Data in RptSLA table is not pruned causing the database table to grow big. 61675, 61696, 61723
  755. Enhancement to allow File system agent to use V1 indexing. 61617, 61619
  756. Data Verification job may get stuck. 61595
  757. CommServe database may grow due to audit information. 61598
  758. No code to preserve access time for NFS shares and also capture ACL changes in the next backup. 61588
  759. When creating a new client the customer would like to have the "Global Filters on Subclients" set to default to "Use Cell Level Policy" instead of "on". 61586
  760. New CMR: Add support for RAC OnDemandInstance 61562
  761. Selective copy operation may not select jobs as expected on custom calendar. 61571, 61577, 61584
  762. Recalls from cloud archive storage may fail when copy precedence is selected. 61561, 61570, 61583
  763. Enable granular pruning from removable media if the MediaAgent is on V11 SP11 or higher. 61565, 61573
  764. Media status remains "Full" after data has been pruned from Removable Media due to granular pruning. 61564, 61569
  765. Tree view in webconsole is broken for a file system data source that scans local paths 61556
  766. Analytics job going to content push phase even when no file qualified for contest push phase. 61556
  767. Launching java console from web browser may fail after release upgrade. 61547
  768. Client - Agent Management does not give option to hide Exclude filters. 61539
  769. DDB recovery may fail to read chunks created by synthetic full 61534
  770. Cannot remove tape library - Error during Library deconfiguration 61525
  771. DDB may end up with missing primary records after secondary file compaction. 61522
  772. Data Verification job may not progress. 61516
  773. DDB data verification job may fail with error 667. 61515
  774. Application aware backup on Windows application from UNIX proxy may not complete on a fresh install. 61509
  775. Client readiness may show client not ready even though the client is ready. 61507, 61508
  776. AWS EC2 snap backup may fail for instances with spaces or dashes in tags. 61499, 61501, 61502
  777. AWS EC2 Instance tags may not be restored. 61499, 61501, 61502
  778. AWS EC2 snap backup may fail due to VSBKP process crash. 61499, 61501, 61502
  779. Added support for AWS China region. 61499, 61501, 61502
  780. VSA for AWS may backup more VMs than expected because of a 503 (request limit exceeded) error. 61486
  781. Adding nodes to a scale out storage pool may fail. 61447
  782. Memory leak in action alerts. 61395
  783. Case Manager jobs submitted from compliance search site to ignore any data from tape media based on an existing configuration setting. 61377, 61385, 61398
  784. If a reviewer user on a case do not have rights at comm-cell level then operations such as search, export does not work for reviewers on the case. 61377, 61385, 61398
  785. Granular pruning from removable media may not be performed at regular intervals. 61353, 61360
  786. Resubmit operation on Virtualize Me Job may not work. 61314, 61321
  787. Removed array names form script input parameters and now detected through REST API Added check for python requests package installed Added check for vstore mapping Added finding remote site from IP 61317
  788. Unable to view libraries after new library configuration. 61293, 61301, 61318, 61334, 61346
  789. Script SetRetentionForUserDeletedItems do not set retention on laptop subclient. 61296, 61297
  790. DDB recovery may take time because of mark and sweep phase 61251
  791. Synthetic full may be slow with dash readless. 61249
  792. Customer would like to remove Explorer Plugin Endpoint Users. 61242
  793. Restore fails with the following error "Failed to get the chunk information for the archive files from archive manager". 61224, 61225
  794. Oracle ASM filter driver support. 61203
  795. Disable activity on ASM instance 61203
  796. Triggering online crawl jobs (Subclient data analytics) may trigger tempDB growth and cause sluggishness on commcell activities 61212
  797. db_recovery_file_dest parameter was getting reset during script preview 61197
  798. JPR for PDB clone was not correct 61197
  799. Oracle Snap deletion may fail 61197
  800. Oracle targetless Tablerestore some times fails with syntax errors 61197
  801. Oracle Snap based Tablerestore using File System fail if the source paths have symbolic links 61197
  802. Oracle RAC PDB restore with switch database mode option selected may fail 61197
  803. Fixes for vrealize data protection package and adding features. 61207
  804. The Commvault Communication Service (CVD) may cause high disk I/O. 61190
  805. DMSetting 'RecallBasedPreviewAllowed' is not honored during webconsole preview 61127
  806. New alert to notify when SQL Server backup job skips the database backup operation. 61118
  807. When activity is disabled on one Oracle instance, other Oracle instances also end up not getting backed up when client is associated to schedule policy. 61117
  808. New alert to notify when SQL Server backup job skips the database backup operation. 61093
  809. Unable to identify the last SAP Archive Link backup needed to complete the migration process. 61090
  810. Cluster configuration fails due to Global Zone cluster without Commvault software. 61081
  811. Virtual Server Subclient Filter is not shown in Subclient configuration Information Report 61078
  812. When Win32 is configured with different packages. Update/Package install from remote cache to Win64 client will fail with file not found error. 61077
  813. Copy software in old download is failing to copy HotFix updates 61077
  814. Block-level snapshot backup job having ZFS mounts might fail in the Archive Index phase. 61043
  815. Block-level snapshot jobs that have a good number of ZFS mounts may take a long time to complete the snapshot phase. 61043
  816. Block-level ZFS live browse might fail in case of nested mount points. 61043
  817. CommServe database may grow due to audit information. 61046
  818. Emails copied directly to a journal mailbox are not content indexed. 61042
  819. A user cannot perform a "copy only" backup when Block Level is enabled with SQL. 61037
  820. Indexbackup was completing with a JPR when there is nothing to backup 61034
  821. Script to set include global filters as use cell level policy. 61033
  822. Compliance Search option to restore files with Access Control List information 61006, 61010
  823. When lndb system files are misconfigured, lndb scan may crash. 60993
  824. Pseudo client shows as Windows client 60991
  825. Db2 snap cross machine restore completes with JPR 60984
  826. Share Enhancement: 1. When a public link is created with password, two email will be sent out. 1st email with share url and second with the password. 2. Password will be auto generated if specified in the create/update share request 60891, 60894, 60994, 61018, 61027
  827. When load balanced web servers are used for the purpose of high availability, the login token validation fails if the token was created by a web server different than the one that is currently processing the request. 60980, 60981, 60992, 61007
  828. VMWare discovery/backup/restores might fail on unix proxies with name resolution errors when hostname of vcenter can only be resolved via local /etc/hosts file 60975
  829. Added a test regkey to restore from user staging file. 60963
  830. Dash Auxiliary copy job might get stuck in reservation until manually suspended and resumed. 60929
  831. "Largest 25 Clients" report shows higher than expected value of application size for subclients which have snap backup enabled. 60928
  832. During organization creation, fields like contact name, associated smtp, primary domain name etc could not be provided from commcell console 60916
  833. Client disassociated from client group may remove associations from data protection schedule policy where client is associated from within the same client group node. 60914, 60915
  834. Backups may fail when some large objects are backing up. 60896
  835. Salesforce pk chunking for objects that are not supported by the pk chunking query 60897, 60901
  836. DDB compact or reindex may fail if mark and sweep is configured. 60893
  837. When trying to delete company an error appears " Company could not be deleted. Please De-Associate all Plans from Organization and try again " - there are no Plans associated with this company. 60885, 60888, 60890
  838. Disk or cloud storage space might not be pruned as expected. 60856, 60859
  839. Service pack upgrades may fail during the database maintenance phase when SSL 3.0 is disabled. 60832
  840. Running the database maintenance tool from the command line may fail for some databases (for example, "HistoryDB" and "WorkflowDB"). 60832
  841. Additional settings are not consistently applied to all members of a given client group. 60833, 60834, 60835
  842. Exchange Database backup operation was hanging while copying Exchange binaries to shadow copy in multi-stream restore operation. 60828
  843. Backup operation for a subclient fails if symbolic links are added as its content from the admin console. 60819, 60820
  844. Web Console fails with JAR resources if JNLP files are not signed by the same certificate error. 60813
  845. There is excessive growth in the transaction log file on CommServe database. 60790, 60793
  846. Script to set include global filters as use cell level policy. 60771
  847. A compliance search that uses "from," "to," "cc," and "bcc" might not search using all SMTP addresses. 60692, 60695, 60744
  848. For table level restore, if the table contains a column of "Timestamp" type, restore will fail with "Cannot insert an explicit value into a timestamp column. Use INSERT with a column list to exclude the timestamp column, or insert a DEFAULT into the timestamp column." 60705
  849. Integration fixes for using data path MA as proxy feature. 60697
  850. Data aging might take a long time to complete. 60694, 60696
  851. Disaster Recovery (DR) Backup to cloud library may fail. 60686
  852. IBM Spectrum Scale (GPFS) backups may fail in the scan phase when the directories are deleted during a scan. 60685
  853. Failure reason will be shown only when the job status is not successful. 60684
  854. Added support for Hitachi NAS (HNAS) Snap NRE restores. 60679
  855. New feature - Customization of Unix guest VMs for LiveSync. 60678
  856. Notes Database restore operations might fail. 60664
  857. The CommCell Configuration custom report shows "Yes" for Software Compression, but software compression is not enabled for the subclient. 60667
  858. Database insert operations fail because of an invalid object ID in the snap structure. 60651
  859. Azure virtual machines backups might fail with an error stating that the "Metadata header is corrupt." 60644
  860. Chunks created on media with smart lock feature might be set to expire for longer retention days than retention days set on copy. 60624
  861. Deduplication database may give errors after compacting secondary files. 60579
  862. The Exchange Online index server playback sometimes fails with the error: "multiple values encountered for non multivalued field". 60573
  863. Emails copied directly to a journal mailbox are not content indexed. 60576
  864. Sensitive information may be displayed in some log files during the live browse operations. 60561
  865. SQL Restore failing due to ''Reservation Failed: The medium is already reserved by some other job[s]" 60556
  866. Eligible backup job may not be committed after the total running time is elapsed. 60543
  867. Restore operations might fail with the following error: "A database query error occurred. Please check log files in CommServe for details." 60535, 60536
  868. Enhancement to show VM Details in Job Details table for CSV output in classic Backup Job Summary Report. 60525
  869. Addition of failed "Legal Hold" items to "Review Set" may fail. 60487, 60488, 60489
  870. Deduplication database was going offline during a file system backup of a MediaAgent. 60484
  871. Script to set retention versions. 60476
  872. A deduplication database (DDB) verification job might take a long time to complete. 60455
  873. Connection to Azure Stack wrapper was failing when Resource Manager URL was typed in uppercase letters. 60440
  874. Data aging operations were running for a long time. 60431, 60433
  875. Index cleanup may not execute. 60374
  876. When the proxy ESX host is selected, the backup copy job fails. 60371
  877. For large SQL servers with 5300 DB's, when trying to add content to the new subclient no data is returned. 60361
  878. VMs are not shown in Clients Missed SLA Details metrics report when VSA subclient is deleted. 60357, 60358
  879. Enhancement to increase number of recall threads in PSEUDOMOUNT started by Data Migrated Recall (DMR) Service to 20 by default. 60350
  880. Foundation changes for performance optimizations for the DDB by changing the pruning logic. 60346
  881. Too many EMC Powerpath devices may be left over by Snap backups, causing snap mount to eventually fail. 60337
  882. Client Information report should not require Java console login on V11 CommServe. 60335
  883. Custom report "Media Agent Load" is not working for CommServe environments on Version 11 Service Pack 11. 60312
  884. Local users might be unable to log in when the user name matches with an Active Directory user name. 60305
  885. Exchange Mailbox - Exchange Web Service (EWS): If the EWS archive job terminates abnormally by manually killing the processes, then, in the ExMBJobInfo.dat file, the serviceaccountusage entries are not cleaned up. The next jobs are not running because of this. 60293
  886. Pre/post browse operation during an Oracle RAC cross-machine restore to another RAC is not displaying physical destination clients. 60164, 60169
  887. Save as script for a cross-machine restore of tenant database is setting a physical client. 60164, 60169
  888. View backup items modified time is displaying incorrect value for cloud apps. 60164, 60169
  889. Need Erase data for cloud storage instances. 60164, 60169
  890. Offline Content Indexing job may fail with error "Fail to submit batch. Please check content indexing services." 60263, 60264
  891. File system agent browse fails due to the index reconstruction playback failure. 60212
  892. VSA File Level Restore: the restore operation restores files unconditionally. 60210
  893. A user cannot perform a copy only backup on SQL when the block-level backup feature is enabled. 60205
  894. Very high memory usage for exchange online backups that use EWS. 60203
  895. Improvements for GDPR. 60193, 60198, 60200
  896. A configuration operation for a VCS cluster might stop responding in certain environments. 60194
  897. "New Index Server" menu item is not displayed in the Japanese CommCell Console. 60186
  898. Unable to remove the Index Server on a clustered CommServe software. 60182, 60185
  899. When you update a smart client group that has the "Clients discovered with VSA subclients" rule, the entities selected are updated as if parent nodes are selected. 60171
  900. CVD crashes while installing from CommCell Console, or when automatic updates are running on Windows 2016 CommServe. 60149
  901. If an item belongs to the invalid part of a restarted backup operation, recalling the item might fail. 60114
  902. A Google Drive restore operation might fail when legacy Google Doc files are restored. 60095
  903. When users are added to a subclient during an incremental backup job, all the files might be backed up when the job is suspended and then resumed. 60095
  904. Failures have been reported during some operations. 60095
  905. When a Google Drive backup job is resumed, it might take a long time to complete. 60095
  906. Memory usage goes up to 100%. 60095
  907. Discovery operations in Microsoft OneDrive for Business fails. 60095
  908. After an SAP backup job, the View BR*Tools logs might not show the page results. 60089
  909. If recover to end of logs is selected on an IntelliSnap subclient, a traditional restore operation was started. 60069
  910. If a roll forward fails in the first attempt, in the second attempt, the job was marked as completed without attempting a roll forward. 60069
  911. Classic and Web Job Summary Reports might show incorrect data written for backup copy jobs. 60058, 60059
  912. Jobs that failed to start or were killed very early might not show up in the classic Backup Job Summary Report. 60058, 60059
  913. Exported Web Console Backup Job Summary report might include duplicate jobs. 60058, 60059
  914. Unable to filter storage policy, Application Size, Media Size, and Network Size columns in the Web Console Backup Job Summary Report. 60058, 60059
  915. Issues with restoring compressed files from virtual machine backups (granular recovery). 60057
  916. Index based restore operations using Agent in Guest with Unconditional Overwrite option reports failures for junction points. 60057
  917. For virtual server agent file-level restore operations, nothing is restored if the destination is a UNC path. 60057
  918. The job controller does not sort correctly by the "Number of data readers" column. 60001
  919. Need an option to hide the Create public IP address option based on an additional setting. 60009, 60010
  920. Remote BLOB Storage (RBS) Migrator crashes when running a maintainer job for a database. 59987
  921. The export operation to the CAB file has a large number of errors reported in the ExMBRestore log file. 59942
  922. EML items with long subject names result in restore issues. 59942
  923. SAP HANA Point-in-time Restore is not honoring client time zone. 59962
  924. The error job not available on given storage policy shown wrongly. 59959
  925. Qscript to allow Global Deduplication dependent copy to change encryption setting. 59944
  926. REST API appName changed from Windows File System to File system after Service Pack 10 installation. 59938, 59941, 59951
  927. VSA backups may complete with errors for Amazon, Azure and OpenStack virtual machines. 59929
  928. Event messages were not appearing in the CommCell Console. 59919
  929. Alert trap object identifier (OID) number was different for SNMP version 3 alerts. 59902
  930. Enabling IntelliSnap option for VMware vCenter clients with no MediaAgent installed might fail. 59897
  931. Enabling filters in the Data Classification Plan. 59874, 59879
  932. Duplicate index servers are listed while creating the Data Classification Plan. 59874, 59879
  933. Exchange Mailbox Delegation is not updated. 59867
  934. SLA (Service Level Agreement) Report might show the status of snap subclients incorrectly. 59863, 59864
  935. PostgreSQL block-level backup can fail with hanging processes. 59843
  936. PostgreSQL restore can fail when a different group name is used for the PostgreSQL user. 59843
  937. Laptop backup operations might run slowly. 59829, 59834, 59839
  938. IBM Notes agents fail to install properly on Linux agent. 59815
  939. Notes Database OSC scheduler is not working as expected. 59815
  940. Timeline charts cannot be filtered by using the filter panel. 59809
  941. qscript to fix prune flags for reattempted aux copy jobs for offline replication. 59790
  942. LoggerNet database restores may fail due to incorrect file mode. 59765
  943. HyperScale OS patch support. 59764
  944. Support for VMware private cloud power management. 59750, 59751, 59752, 59754
  945. If there are backlogged volumes on a size update, the correct size might not be reported for a deduplication store. 59738
  946. SQL Tlog backup completes with errors and chunk is not committed next operation does not convert and customer can not restore. 59737
  947. The CvMountd process might crash on Solaris MediaAgents when you perform a browse and restore operation. 59702
  948. Version 9 client upgrades fail because of a timeout. 59701
  949. Adding support for document type based entity extraction. 59698
  950. If there are backlogged volumes on a size update, the correct size might not be reported for a deduplication store. 59684
  951. In file system data with deep folders, browse might not work. 59657
  952. Playback of items is failing in Index due to corruption of Index files. 59656
  953. Indexing playback of jobs fails with "Can't add version record for node [3] and parent [2] versionguid" (or) "Failed to find DirTree record for []" 59650
  954. Synthetic full fails with "Failed to find Node Table entry for nodeId" during restore vector generation 59650
  955. Version 8 stubs might fail to recall in Version 11. 59600
  956. For Citrix Xen restore operation, storage repository browse operation is failing for Version 9 clients with Version 11 CommServe. 59598, 59599
  957. The Xen restore as template operation failed to read the VM configuration file. 59597
  958. Files inside a moved folder are not backed up in specific scenarios. 59580
  959. "New Index Server" menu is not shown in the Japanese CommCell Console. 59558
  960. File-level browse was failing if the system-reserved partition was after the Windows partition, or if the system-reserved partition did not have a boot flag. 59557
  961. Data Retention report, Storage Policy Details report, Full and Incremental Backup custom report might not generate correctly for non admin users, if user security was not honored. 59534
  962. Browsing a subclient on UNIX client shows duplicate items for mount points when subclient content has nested mount points backed up. 59499
  963. Enhanced error reporting for out of disk space condition during analytics jobs. 59486
  964. For SAP backups, "View BR*Tools logs" may not display page results. 59483
  965. Provide an option to verify that stubs are recallable on disk without any disk writes. 59442
  966. Restore could fail from the job where aged afiles are present 59427
  967. Ability to edit data classification (DC) plan. DC plan was not showing cloud index servers. Initial support for content indexing filters. 59390, 59391
  968. Importing a job from Exchange Mailbox (Classic) to Exchange Mailbox Agent might be slow. 59370
  969. Azure In-place restore may fail if the source VM was migrated to Azure using a third party tool. 59363
  970. Unable to remove the Index Server on a clustered CommServe software. 59357, 59359
  971. Skip ExchangeDB database discovery by using reg Key 59355
  972. During the offline mining restore operation of documents, the job status displays the restore operation as failed, even though the site is still being restored. 59345
  973. VM Content Indexing: Creating Data source using index server ID 59340, 59342, 59344, 59348
  974. Default device may get deleted wrongly when the system tries to delete mag library. 59316
  975. Disk or Cloud storage space may not be pruned as expected. 59291, 59293
  976. Added a new report to show which data aging operations are scheduled to start outside a specific time window for all CommCell environments. 59272
  977. Storage Policy or Storage Policy copy name having special characters was not handled. 59255
  978. QScript for changing ports of message queue. 59248, 59250
  979. We added the ability to restore NFS ObjectStore items from a secondary copy. 59241
  980. db2 rollforward phase is always shown as completed and DBA requested an event saying rollforward phase is skipped. 59228
  981. Enabling Optimized scan and folder-level multithreading on the default subclient cause the ifind process to stop responding. 59223
  982. VM Backup report is not reporting latest job details. 59214
  983. Update installation using an update pack may fail on Unix machines. 59200
  984. Partitioned DDB full reconstruction may fail in the prune records phase. 59203
  985. Support for copy precedence for NFS/CIFS access. 59199
  986. Multiple connection attempts resulting in network exhaustion when system time out on the client machine is rolled back in a firewall configuration. 59198
  987. Oracle backup copy may fail if data files point to symbolic links. 59197
  988. Oracle table level restore may not complete on Windows. 59197
  989. Extra copies of VSA application-aware backup jobs might be retained. 59202, 59205
  990. Incremental backup operation might fail with expired token errors. 59196
  991. Backup job becomes unresponsive and may crash for incremental SharePoint O365 backups. 59196
  992. Enhanced error reporting for out of disk space condition during analytics jobs. 59195
  993. A clustered client was not coming online when the client local host name used a different IP than the expected IP. 59194
  994. Download of multiple versions of the same file from the Web Console might not work as expected. 59193
  995. Import job from Exchange Mailbox (Classic) to Exchange Mailbox Agent may be slow. 59192

Last modified: 11/4/2019 4:01:46 PM