> Expert > CommCell Management > Job Management > Job Priorities and Priority Precedence

Job Priorities and Priority Precedence - Advanced

Setting Priority Precedence

Job Priority is represented by a 3 digit number. The first digit represents Operation Priority.

  • On selecting Client priority precedence, the second digit represents Client priority and third digit represents Agent priority.

  • On selecting Agent Type priority precedence, the second digit represents Agent priority and third digit represents Client priority.

For a Client

On selecting Client priority precedence, the second digit represents Client priority and third digit represents Agent priority.

Use the following steps to set Client Priority Precedence:

  1. From the CommCell Console ribbon, on the Home tab, click Control Panel.

  2. Under Data, click Job Management.

    The Job Management dialog box is displayed.

  3. Click the Job Priorities tab.

  4. Select Client from the Priority Precedence box.

  5. Click OK.

set_prty_prcdnc_cnt

For an Agent

On selecting Agent Type priority precedence, the second digit represents Agent priority and third digit represents Client priority.

Use the following steps to set Agent Priority Precedence:

  1. From the CommCell Console ribbon, on the Home tab, click Control Panel.

  2. Under Data, click Job Management.

    The Job Management dialog box is displayed.

  3. Click the Job Priorities tab.

  4. Select Agent Type from the Priority Precedence box.

  5. Click OK.

set_prty_prcdnc_agt

Setting the Priority for a Client

By default, the Job Manager automatically assigns a priority of 6 to all client computers except Edge Drive clients. Edge Drive clients are automatically assigned a priority of 3. You can prioritize your clients according to your requirements by updating the default values.

Use the following steps to set a user-defined client priority:

  1. From the CommCell Browser, right-click the client and select Properties.

  2. In the Client Properties dialog box, click Advanced.

    the Advanced Client Properties dialog box is displayed.

  3. On the Job Configuration tab, in the Job priority (0-9) box, enter a priority.

    Note: The lower the value, the higher the priority of the client.

  4. Click OK.

Setting the Priority for an Agent

The Job Manager automatically assigns default priorities to all Agents. You can prioritize them according to your requirements by updating the default values.

Use the following steps to set user-defined agent priority:

  1. From the CommCell Console ribbon, on the Home tab, click Control Panel.

  2. Under Data, click Job Management.

    The Job Management dialog box is displayed.

  3. On the Job Priorities tab, select an Agent Type, and in the Priority column, enter the priority value.

    Note: The lower the value, the higher the priority of the agent.

  4. Click OK.

Viewing Job Priorities

You can view the priorities assigned to

  • All jobs in the Job Controller window.

  • A specific job by viewing the details of the job.

For All Jobs

You can view the priorities of all jobs in the Job Controller window. By default, the Job Controller window does not display the priorities of running jobs. To view the job priorities for all jobs, you need to enable the Priority column.
Use the following steps to view all job priorities:

  1. From the CommCell Console toolbar, click Job Controller.

  2. In the Job Controller pane, right-click any table header or click the double arrows located on the extreme right to display table menu.

  3. Click Choose Columns and then select Priority.

  4. In the Job Controller window, the Priority column indicates the priority numbers for all jobs listed.

prty_alljobs

For a Specific Job

You can view the priority assigned to a specific job by viewing the details of the job.

Use the following steps to view priority of a specific job:

  1. From the CommCell Console toolbar, click Job Controller.

  2. In the Job Controller pane, right-click an active job and select Detail.

  3. You can view the Priority of the selected job under the General tab.

prty_onejob

Setting the Job Priority

Setting Job Priority allows you to change the priority of a job or a group of jobs. You can use it to prioritize jobs based on your requirements by changing their job priority value.

After changing the job priority, if a higher priority job interrupts another lower priority job for resources, then the Job Manager interrupts the running job and allocates the freed resources to a higher priority job only if Job Preemption is allowed.

For Administration Jobs

You can change the priority of the following administration jobs:

  • Auxiliary Copy

  • Data Verification

  • Information Management

  • Media Refresh

  • Persistent Recovery

  • Synthetic Full

Note

  • Auxiliary copies honor job priorities only when Scalable Resource Allocation is enabled for the Auxiliary copy operation. If reservation requests are sent at the same time by two jobs with differing priorities, then the priorities are not honored because the reservations are processed first in first out (FIFO) order.

  • Beginning in Feature Release 11.25, the system permanently assigns higher auxiliary copy priority to certain clients/VMs, as follows:

    • For the latest version of indexing, the auxiliary copy job priority is supported at the job level, at the virtualization client level, and at the VM level.

    • For Indexing Version 1, the auxiliary copy job priority is supported at the job level and at the virtualization client level.

    • For Indexing Version 1, although VM level job priority is supported for backups, it is not applicable for auxiliary copy job priority, since multiple VMs are part of same subclient and part of same parent job. There are no child VM jobs for Indexing Version 1.

Exception: Job priorities for the IntelliSnap backup copy operation.

Use the following steps to change the priority of administration jobs:

  1. From the CommCell Console ribbon, on the Home tab, click Control Panel.

  2. Under Data, click Job Management.

    The Job Management dialog box is displayed.

  3. Click the Job Priorities tab

  4. Select a Job Type and enter the priority value in the Priority column.

    Note

    The lower the value, the higher the priority of the agent.

  5. Click OK.

set_prty_job

For an Active Job

Use the following steps to change the priority for an active job:

  1. From the CommCell Console ribbon, on the Home tab, click Job Controller.

  2. In the Job Controller window, right-click an active job, and then click Change Priority.

  3. In the Change Job Priority dialog box, enter or select a value from 0 (highest priority) to 999 (lowest priority) in the New Priority box.

  4. Click OK.

change_prty_job

For a Group of Active Jobs

Use the following steps to change the priority for a group of active jobs:

  1. From the CommCell Console ribbon, on the Home tab, click Job Controller.

  2. In the Job Controller window, right-click an active job, and then click Change Priority.

  3. In the Change Job Priority dialog box, enter or select a value from 0 (highest priority) to 999 (lowest priority) in the New Priority box.

  4. In Select Jobs pane:

    • Select All Jobs to change the priority of all active jobs.

    • Select All Selected Jobs to change the priority of all highlighted jobs.

    • Select All Jobs for this Client to change the priority of jobs of a particular client and then select the client. You can also change the priority of jobs for a particular agent by selecting the Only Jobs for this Agent Type checkbox and then select the agent.

    • Select All Jobs on this MediaAgent to change the priority of jobs of a particular MediaAgent and then select the MediaAgent.

  5. Click OK.

change_prty_alljobs

For an Immediate Job

Use the following steps to change the priority of an immediate job:

  1. Click Advanced.

    The advanced restore options dialog box appears.

  2. On the Startup tab, click Change Priority and enter a value from 0 (highest priority) to 999 (lowest priority).

  3. To start the job in a suspended state, select the Startup in suspended state check box.

  4. To queue jobs so that the jobs remain in the Job Controller in a queued state instead of failing, select the Queue if other conflicting jobs are active check box.

  5. Click OK.

For a Scheduled Job

You can change the priority of data protection jobs after it is scheduled.

Use the following steps to change the priority of a scheduled backup job:

  1. From the CommCell Console, right-click the entity for which you want to change the priority of the data protection jobs and click View > Schedules.

    If you are at the subclient level, right-click the subclient and click Schedules.

  2. Right-click a scheduled job and click Edit.

    The schedule details dialog box appears.

  3. Click Advanced.

    The advanced schedule options dialog box appears.

  4. On the Startup tab, click Change Priority and enter a value from 0 (highest priority) to 999 (lowest priority).

  5. To start the job in a suspended state, select the Startup in suspended state check box.

  6. To queue jobs so that the jobs remain in the Job Controller in a queued state instead of failing, select the Queue if other jobs are active check box.

  7. Click OK.

Setting the Default Job Priority

You can change the priority of a scheduled job from user-defined value to default value.

Use the following steps to set the default priority for a scheduled job:

  1. From the dialog box of an appropriate operation (such as backup, restore or auxiliary copy) click Advanced.

  2. From the resulting dialog box click the Startup tab.

  3. Select Use Default Priority.

  4. To start the job in a suspended state, select the Startup in suspended state check box.

  5. Click OK.

change_prty_dflt

Loading...