DB2: System Requirements

Verify that your environment meets the system requirements for DB2.

Operating System

Important

Use the most recent version of the operating system that is listed. The Commvault software fully supports the most recent version of an operating system, until the vendor ends support. More recent versions of the Commvault software might not install on operating systems that are not supported by the vendor anymore. For information about the support lifecycle of an operating system, contact the vendor.

DB2 Database 11.5/11.1 64-Bit

AIX

Data protection on Logical Partitioning (LPAR) and Workload Partitioning (WPAR) is supported.

Operating system	Processor architecture
AIX 7.3 64-bit	PowerPC
AIX 7.2 64-bit	PowerPC
AIX 7.1 64-bit	PowerPC
AIX 6.1 TL 02 SP00 or higher, 64-bit	PowerPC

Linux

Important

If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.
On Linux, if you installed libstdc++.so.6, you must also install the compat-stdlibc++ rpm that contains libstdc++.so.5.

Operating system	Processor architecture
NeoKylin Linux 6.5	x64
Red Hat Enterprise Linux 8.x Before you install the Commvault software, you must manually install the libxcrypt.x86_64 and libnsl.x86_64 packages on the computer.	x64
Red Hat Enterprise Linux 7.x	x64 PowerPC (big endian or little endian) Compatible processors
Red Hat Enterprise Linux 5.x with libstdc++ version 4.2.4 or above	x64
Red Hat Enterprise Linux 5.x with glibc 2.5.x	PowerPC
Red Hat Enterprise Linux 5.x with glibc 2.5.x	x64
Red Hat Enterprise Linux/CentOS 7.x with glibc 2.17.x or a more recent version	x64
Red Hat Enterprise Linux/CentOS 6.x with glibc 2.12-1.25.x or a more recent version	x64
Red Hat Enterprise Linux/CentOS 5.x with glibc 2.5.x	x64
SuSE Linux 15 (Initial Release/SP1 and later SPs) with glibc 2.26.x and higher	x64
SuSE Linux 12 (Initial Release/SP1/SP2/SP3/SP4/SP5) with glibc 2.19.x	x64
SuSE Linux 12 SP1 Enterprise Server	PowerPC PowerPC (little endian)
SuSE Linux 11 (Initial Release/SP1 and later SPs) with glibc 2.9.x and higher	x64

Important

SuSE Linux 15 (Initial Release/SP1 and later SPs) with glibc 2.26.x is only supported by DB2 Database version 11.5.
We recommend you to stay on Commvault Platform Release 24 (11.24) if you have Red Hat Enterprise Linux PPCLE64 processor architecture.

Solaris

In a UNIX virtualization environment using Solaris, you can back up and restore data in both global and non-global zones.

Operating System	Processor architecture
Solaris 11.x	Ultra5 or higher recommended

Z-Linux

Operating System	Processor architecture
Red Hat Enterprise Linux 8.x	s390x 64-bit
Red Hat Enterprise Linux 7.x	s390x 64-bit
Red Hat Enterprise Linux 6.x	s390x 64-bit
SuSE Linux 12.x Enterprise Server	s390x 64-bit
SuSE Linux Enterprise Server 15.5	s390x 64-bit

Windows

Operating system	Processor architecture
Microsoft Windows Server 2019 Editions	All Windows-compatible processors are supported
Microsoft Windows Server 2016 Editions	All Windows-compatible processors are supported
Microsoft Windows Server 2012 x64 Edition	All Windows-compatible processors are supported
Microsoft Windows Server 2012 R2 Editions	All Windows-compatible processors are supported
Microsoft Windows Server 2008 R2 x64 Editions Server Core installations are not supported.	All Windows-compatible processors are supported

DB2 Universal Database 10.5, 10.1, 9.7 64-Bit

AIX

Data protection on Logical Partitioning (LPAR) and Workload Partitioning (WPAR) is supported.

Operating system	Processor architecture
AIX 7.3 64-bit	PowerPC
AIX 7.2 64-bit	PowerPC
AIX 7.1 64-bit	PowerPC
AIX 6.1 TL 02 SP00 or higher, 64-bit	PowerPC

HP-UX

Operating system	Processor architecture
HP-UX 11i v3 (11.31)	Itanium
HP-UX 11i v1 (11.23)	x64

Linux

Important

If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.
On Linux, if you installed libstdc++.so.6, you must also install the compat-stdlibc++ rpm that contains libstdc++.so.5.

Operating system	Processor architecture
NeoKylin Linux 6.5	x64
Red Hat Enterprise Linux 7.x	x64 PowerPC (big endian or little endian) Compatible processors
Red Hat Enterprise Linux 6 with glibc 2.12.x	x64
Red Hat Enterprise Linux 5.x with libstdc++ version 4.2.4 or above	PowerPC
Red Hat Enterprise Linux 6 with glibc 2.12.x	x64
Red Hat Enterprise Linux/CentOS 7.x with glibc 2.17.x or a more recent version Supported only on DB2 versions 10.5, 10.1, and 9.7.	x64
Red Hat Enterprise Linux/CentOS 6.x with glibc 2.12-1.25.x or a more recent version	x64
Red Hat Enterprise Linux/CentOS 5.x with glibc 2.5.x	x64
SuSE Linux 12 (Initial Release/SP1/SP2/SP3/SP4/SP5) with glibc 2.19.x	x64
SuSE Linux 11 (Initial Release/SP1 and later SPs) with glibc 2.9.x and higher	x64

Z-Linux

Operating system	Processor architecture
Red Hat Enterprise Linux 8.x	s390x 64-bit
Red Hat Enterprise Linux 7.x	s390x 64-bit
Red Hat Enterprise Linux 6.x	s390x 64-bit
SuSE Linux 12 (Initial Release/SP1/SP2/SP3/SP4/SP5) Enterprise Server	s390x 64-bit
SuSE Linux 15.5 (Initial Release/SP1/SP2/SP3/SP4/SP5) Enterprise Server	s390x 64-bit

Solaris

In a UNIX virtualization environment using Solaris, you can back up and restore data in both global and non-global zones.

Operating system	Processor architecture
Solaris 11.x	Ultra5 or higher recommended
Solaris 10 Update 6 or equivalent	UltraSPARC-II or more recent recommended

Windows

Operating system	Operating system
Microsoft Windows Server 2016 Editions	All Windows-compatible processors are supported
Microsoft Windows Server 2012 x64 Edition	All Windows-compatible processors are supported
Microsoft Windows Server 2012 R2 Editions	All Windows-compatible processors are supported
Microsoft Windows Server 2008 R2 x64 Editions Server Core installations are not supported.	All Windows-compatible processors are supported

DB2 Universal Database 10.5, 10.1 Express Server Edition

Linux

Important

If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.
On Linux, if you installed libstdc++.so.6, you must also install the compat-stdlibc++ rpm that contains libstdc++.so.5.

Operating system	Processor architecture
Red Hat Enterprise Linux 6 with glibc 2.12.x	x64
Red Hat Enterprise Linux 5.x with libstdc++ version 4.2.4 or above	PowerPC
Red Hat Enterprise Linux 5.x with glibc 2.5.x	x64
Red Hat Enterprise Linux/CentOS 7.x with glibc 2.17.x or a more recent version	x64
Red Hat Enterprise Linux/CentOS 6.x with glibc 2.12-1.25.x or a more recent version	x64
Red Hat Enterprise Linux/CentOS 5.x with glibc 2.5.x	x64
SuSE Linux 12 (Initial Release/SP1/SP2/SP3/SP4/SP5) with glibc 2.19.x	x64
SuSE Linux 11 (Initial Release/SP1 and later SPs) with glibc 2.9.x and higher	x64
SuSE Linux 11 Enterprise Server with libstdc++ version 4.2.4 or above	PowerPC

Windows

Operating system	Processor architecture
Microsoft Windows Server 2016 Editions	All Windows-compatible processors are supported
Microsoft Windows Server 2012 x64 Edition	All Windows-compatible processors are supported
Microsoft Windows Server 2012 R2 Editions	All Windows-compatible processors are supported
Microsoft Windows Server 2008 R2 x64 Editions Server Core installations are not supported.	All Windows-compatible processors are supported

DB2 Universal Database 9.7 32-Bit

Linux

Important

If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.
On Linux, if you installed libstdc++.so.6, you must also install the compat-stdlibc++ rpm that contains libstdc++.so.5.

Operating system	Processor architecture
Red Hat Enterprise Linux 6.x with libstdc++ version 4.2.4 or above	PowerPC
Red Hat Enterprise Linux 6 with glibc 2.12.x	x86 Compatible processors
Red Hat Enterprise Linux 5.x with libstdc++ version 4.2.4 or above	PowerPC
Red Hat Enterprise Linux 5.x with glibc 2.5.x	x86 Compatible processors
SuSE Linux 11 (Initial Release/SP1 and later SPs) with glibc 2.9.x and higher	x86 Compatible processors
SuSE Linux 11 Enterprise Server with libstdc++ version 4.2.4 or above	PowerPC

Hard Drive

AIX

Component	Space required
Software	3 GB
Job results folder	256 MB
Log folder	256 MB

Linux

Component	Space required
Software	2 GB
Job results folder	256 MB
Log folder	256 MB

Windows

Component	Space required
Software	1 GB
Job results folder	256 MB
Log folder	256 MB

Memory (RAM)

2 GB or more

Clustering

If clustering is supported by the operating system, you can install the software on a cluster. For information about supported cluster types, see Support for Cluster Configuration.

Software That Is Automatically Installed

.NET Framework

On most versions of Windows, the .NET Framework 4.6.2 is automatically installed.

Microsoft Visual C++ Redistributable 2017

Starting with Service Pack 18, Microsoft Visual C++ Redistributable 2017 (vcredist2017.exe) is automatically installed.

If a computer does not have the most recent Windows updates, the installation of Microsoft Visual C++ Redistributable 2017 will fail in installing Universal C Runtime. The following Windows updates must be installed to prevent the installation failure. The updates are not required on the most recent Windows operating system versions, such as Microsoft Windows 10 and Microsoft Windows Server 2016, because these versions have the Universal C Runtime already installed.

KB2919355
KB2939087
KB2975061
KB2999226

DISCLAIMER

Certain third-party software and service releases (together, "Releases") may not be supported by Commvault. You are solely responsible for ensuring Commvault’s products and services are compatible with any such Releases.