Loading...

Client Computer Properties (IBM i)

Use this dialog box to configure properties of the IBM i client.

Data folder

The location of the data files for the IBM i File System Agent client.

 CVD Port

The CVD port number.

Note: The port number must be the same port value that you specified in the IBM i File System Agent client host configuration. The default value is 9401. Use a value of 0 to indicate that it is the default port number.

IBM i User Credentials

The IBM i user credentials.

Note: The software uses this user profile to run the Commvault backup and restore operations. You must select a user profile that meets the following requirements:

  • The profile has the *SECOFR user class and with all special authorities.
  • The profile is enrolled in the QDLS file system when QDLS data protection is required.  For information on how to enroll the user profile, go to the IBM site, Client Access Express for Windows Setup. After you find and open the document, search for Enroll Client Access Express users.
  • The profile has the language parameters set to English by using “LANGID(ENU) CNTRYID(US) CCSID(00037)”.
  • You cannot use the following system user profiles: "QDBSHR", "QDOC", "QLPAUTO", "QLPINSTALL", "QRJE", "QSECOFR", "QSPL", "QDFTOWN", "QTSTRQS", "QSYS".

Subsystem Description

The IBM i subsystem description of the active subsystem name where the Commvault services run. Use the following format:

“<Library_Name>/<Subsystem_Description>”.

For example, if you specify “QSYS/QCTL”, then the software runs the Commvault services, backup and restore jobs, under the QCTL subsystem.

Job queue

The Job queue name in the following format: “<Library>/<JOBQ_object>”

The job queue must be connected to the subsystem that you specified in the Subsystem Description box. If the job queue is not connected, then select the Create job queue check box. When you select this check box, the software creates creates a separate job queue under the Commvault  CVLIBOBJ library and connects to the specified subsystem.

Create job queue

Select this check box to have the software create a separate job queue under the Commvault  CVLIBOBJ library and connect to the specified subsystem.

Example

If the Subsystem Description is “QSYS/QCTL” and you select the Create job queue check box, then the default value for the job queue is “CVLIBOBJ/QCTL”

Job Priority

The job priority of the Commvault jobs that run on the IBM i client. The valid values are 1-9, where 1 is the highest priority. The default value is 5.

Run Priority

The job run priority of the Commvault jobs that run on the IBM i client. The valid values are 1-99, where 1 is the highest priority. The default value is 50.

Last modified: 8/8/2018 10:34:05 AM