Loading...

Getting Started with Commvault HyperScale Appliance

Review the following topics to get started with the Commvault HyperScale Appliance:

Step 1: What's in the Box

Ensure that you have received all the items in the shipment. For more information, see What's in the Box.

Step 2: Racking the Commvault HyperScale Appliance

Make sure that the Commvault HyperScale Appliance is racked as described in Racking the Commvault HyperScale Appliance.

Step 3: Cabling the Commvault HyperScale Appliance

Make sure that the Commvault HyperScale Appliance is cabled as described in Cabling the Commvault HyperScale Appliance.

Step 4: Pre-Installation Checklist

Collect the necessary information using the Pre-Installation Checklist to plan and prepare for setting up the Commvault HyperScale Appliance.

Step 5: Setting Up the Integrated Remote Management Console (iRMC)

Before setting up the Commvault HyperScale Appliance, setup the iRMC (Integrated Remote Management Console) on all the nodes. See Setting up the Integrated Remote Management Console (iRMC) for more information.

Step 6: Network Settings (Optional)

Depending on whether you have DHCP available and if bonding is required in your environment you can setup the following Network related settings:

Step 7: Setting Up a Block

Setup a block consisting of 3 nodes as described in Setting up a Block to ensure that the correct nodes are identified and configured when the setup is subsequently run.

Step 8: Setting Up the Appliance

Setup the Commvault HyperScale Appliance. See Setting up the Commvault HyperScale Appliance for more information.

Step 9: Saving the Configuration Settings (Optional)

Save the configuration settings to avoid re-entering the network configuration during re-imaging /disaster recovery purposes . See Saving the Configuration for more information.

Step 10: Opening the Command Center

Open the Command Center using the URL that was added during setup. See Opening the Command Center for more information.

Step 11: Completing the Core Setup

Core Setup includes the following tasks:

Step 12: Performing a Test Backup and Restore

Step 13: What to Do Next

After initial setup, you can perform the following tasks:

Last modified: 10/4/2019 6:36:06 PM