Verify that your environment meets the system requirements for DB2.
Operating System
Important
Use the most recent version of the operating system that is listed. The Commvault software fully supports the most recent version of an operating system, until the vendor ends support. More recent versions of the Commvault software might not install on operating systems that are not supported by the vendor anymore. For information about the support lifecycle of an operating system, contact the vendor.
DB2 Database 11.5/11.1 64-Bit
AIX
Data protection on Logical Partitioning (LPAR) and Workload Partitioning (WPAR) is supported.
Operating system |
Processor architecture |
---|---|
AIX 7.3 64-bit |
PowerPC |
AIX 7.2 64-bit |
PowerPC |
AIX 7.1 64-bit |
PowerPC |
AIX 6.1 TL 02 SP00 or higher, 64-bit |
PowerPC |
Linux
Important
-
If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.
-
On Linux, if you installed libstdc++.so.6, you must also install the compat-stdlibc++ rpm that contains libstdc++.so.5.
Operating system |
Processor architecture |
---|---|
NeoKylin Linux 6.5 |
|
Red Hat Enterprise Linux 8.x Before you install the Commvault software, you must manually install the libxcrypt.x86_64 and libnsl.x86_64 packages on the computer. |
|
Red Hat Enterprise Linux 7.x |
|
Red Hat Enterprise Linux 5.x with libstdc++ version 4.2.4 or above |
|
Red Hat Enterprise Linux 5.x with glibc 2.5.x |
|
Red Hat Enterprise Linux 5.x with glibc 2.5.x |
|
Red Hat Enterprise Linux/CentOS 7.x with glibc 2.17.x or a more recent version |
|
Red Hat Enterprise Linux/CentOS 6.x with glibc 2.12-1.25.x or a more recent version |
|
Red Hat Enterprise Linux/CentOS 5.x with glibc 2.5.x |
|
SuSE Linux 15 (Initial Release/SP1 and later SPs) with glibc 2.26.x and higher |
|
SuSE Linux 12 (Initial Release/SP1/SP2/SP3/SP4/SP5) with glibc 2.19.x |
|
SuSE Linux 12 SP1 Enterprise Server |
|
SuSE Linux 11 (Initial Release/SP1 and later SPs) with glibc 2.9.x and higher |
|
Ubuntu 22.04 |
|
Important
-
SuSE Linux 15 (Initial Release/SP1 and later SPs) with glibc 2.26.x is only supported by DB2 Database version 11.5.
-
We recommend you to stay on Commvault Platform Release 24 (11.24) if you have Red Hat Enterprise Linux PPCLE64 processor architecture.
Solaris
In a UNIX virtualization environment using Solaris, you can back up and restore data in both global and non-global zones.
Operating System |
Processor architecture |
---|---|
Solaris 11.x |
Ultra5 or higher recommended |
Z-Linux
Operating System |
Processor architecture |
---|---|
Red Hat Enterprise Linux 8.x |
s390x 64-bit |
Red Hat Enterprise Linux 7.x |
s390x 64-bit |
Red Hat Enterprise Linux 6.x |
s390x 64-bit |
SuSE Linux 12.x Enterprise Server |
s390x 64-bit |
SuSE Linux Enterprise Server 15.5 |
s390x 64-bit |
Windows
Operating system |
Processor architecture |
---|---|
Microsoft Windows Server 2019 Editions |
All Windows-compatible processors are supported |
Microsoft Windows Server 2016 Editions |
All Windows-compatible processors are supported |
Microsoft Windows Server 2012 x64 Edition |
All Windows-compatible processors are supported |
Microsoft Windows Server 2012 R2 Editions |
All Windows-compatible processors are supported |
Microsoft Windows Server 2008 R2 x64 Editions Server Core installations are not supported. |
All Windows-compatible processors are supported |
DB2 Universal Database 10.5, 10.1, 9.7 64-Bit
AIX
Data protection on Logical Partitioning (LPAR) and Workload Partitioning (WPAR) is supported.
Operating system |
Processor architecture |
---|---|
AIX 7.3 64-bit |
PowerPC |
AIX 7.2 64-bit |
PowerPC |
AIX 7.1 64-bit |
PowerPC |
AIX 6.1 TL 02 SP00 or higher, 64-bit |
PowerPC |
HP-UX
Operating system |
Processor architecture |
---|---|
HP-UX 11i v3 (11.31) |
Itanium |
HP-UX 11i v1 (11.23) |
x64 |
Linux
Important
-
If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.
-
On Linux, if you installed libstdc++.so.6, you must also install the compat-stdlibc++ rpm that contains libstdc++.so.5.
Operating system |
Processor architecture |
---|---|
NeoKylin Linux 6.5 |
x64 |
Red Hat Enterprise Linux 7.x |
|
Red Hat Enterprise Linux 6 with glibc 2.12.x |
x64 |
Red Hat Enterprise Linux 5.x with libstdc++ version 4.2.4 or above |
PowerPC |
Red Hat Enterprise Linux 6 with glibc 2.12.x |
x64 |
Red Hat Enterprise Linux/CentOS 7.x with glibc 2.17.x or a more recent version Supported only on DB2 versions 10.5, 10.1, and 9.7. |
x64 |
Red Hat Enterprise Linux/CentOS 6.x with glibc 2.12-1.25.x or a more recent version |
x64 |
Red Hat Enterprise Linux/CentOS 5.x with glibc 2.5.x |
x64 |
SuSE Linux 12 (Initial Release/SP1/SP2/SP3/SP4/SP5) with glibc 2.19.x |
x64 |
SuSE Linux 11 (Initial Release/SP1 and later SPs) with glibc 2.9.x and higher |
x64 |
Z-Linux
Operating system |
Processor architecture |
---|---|
Red Hat Enterprise Linux 8.x |
s390x 64-bit |
Red Hat Enterprise Linux 7.x |
s390x 64-bit |
Red Hat Enterprise Linux 6.x |
s390x 64-bit |
SuSE Linux 12 (Initial Release/SP1/SP2/SP3/SP4/SP5) Enterprise Server |
s390x 64-bit |
SuSE Linux 15.5 (Initial Release/SP1/SP2/SP3/SP4/SP5) Enterprise Server |
s390x 64-bit |
Solaris
In a UNIX virtualization environment using Solaris, you can back up and restore data in both global and non-global zones.
Operating system |
Processor architecture |
---|---|
Solaris 11.x |
Ultra5 or higher recommended |
Solaris 10 Update 6 or equivalent |
UltraSPARC-II or more recent recommended |
Windows
Operating system |
Operating system |
---|---|
Microsoft Windows Server 2016 Editions |
All Windows-compatible processors are supported |
Microsoft Windows Server 2012 x64 Edition |
All Windows-compatible processors are supported |
Microsoft Windows Server 2012 R2 Editions |
All Windows-compatible processors are supported |
Microsoft Windows Server 2008 R2 x64 Editions Server Core installations are not supported. |
All Windows-compatible processors are supported |
DB2 Universal Database 10.5, 10.1 Express Server Edition
Linux
Important
-
If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.
-
On Linux, if you installed libstdc++.so.6, you must also install the compat-stdlibc++ rpm that contains libstdc++.so.5.
Operating system |
Processor architecture |
---|---|
Red Hat Enterprise Linux 6 with glibc 2.12.x |
x64 |
Red Hat Enterprise Linux 5.x with libstdc++ version 4.2.4 or above |
PowerPC |
Red Hat Enterprise Linux 5.x with glibc 2.5.x |
x64 |
Red Hat Enterprise Linux/CentOS 7.x with glibc 2.17.x or a more recent version |
x64 |
Red Hat Enterprise Linux/CentOS 6.x with glibc 2.12-1.25.x or a more recent version |
x64 |
Red Hat Enterprise Linux/CentOS 5.x with glibc 2.5.x |
x64 |
SuSE Linux 12 (Initial Release/SP1/SP2/SP3/SP4/SP5) with glibc 2.19.x |
x64 |
SuSE Linux 11 (Initial Release/SP1 and later SPs) with glibc 2.9.x and higher |
x64 |
SuSE Linux 11 Enterprise Server with libstdc++ version 4.2.4 or above |
PowerPC |
Windows
Operating system |
Processor architecture |
---|---|
Microsoft Windows Server 2016 Editions |
All Windows-compatible processors are supported |
Microsoft Windows Server 2012 x64 Edition |
All Windows-compatible processors are supported |
Microsoft Windows Server 2012 R2 Editions |
All Windows-compatible processors are supported |
Microsoft Windows Server 2008 R2 x64 Editions Server Core installations are not supported. |
All Windows-compatible processors are supported |
DB2 Universal Database 9.7 32-Bit
Linux
Important
-
If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.
-
On Linux, if you installed libstdc++.so.6, you must also install the compat-stdlibc++ rpm that contains libstdc++.so.5.
Operating system |
Processor architecture |
---|---|
Red Hat Enterprise Linux 6.x with libstdc++ version 4.2.4 or above |
PowerPC |
Red Hat Enterprise Linux 6 with glibc 2.12.x |
|
Red Hat Enterprise Linux 5.x with libstdc++ version 4.2.4 or above |
PowerPC |
Red Hat Enterprise Linux 5.x with glibc 2.5.x |
|
SuSE Linux 11 (Initial Release/SP1 and later SPs) with glibc 2.9.x and higher |
|
SuSE Linux 11 Enterprise Server with libstdc++ version 4.2.4 or above |
PowerPC |
Hard Drive
AIX
Component |
Space required |
---|---|
Software |
3 GB |
Job results folder |
256 MB |
Log folder |
256 MB |
Linux
Component |
Space required |
---|---|
Software |
2 GB |
Job results folder |
256 MB |
Log folder |
256 MB |
Windows
Component |
Space required |
---|---|
Software |
1 GB |
Job results folder |
256 MB |
Log folder |
256 MB |
Memory (RAM)
2 GB or more
Clustering
If clustering is supported by the operating system, you can install the software on a cluster. For information about supported cluster types, see Support for Cluster Configuration.
Software That Is Automatically Installed
.NET Framework
On most versions of Windows, the .NET Framework 4.7 is automatically installed.
Microsoft Visual C++ Redistributable 2017
Starting with Service Pack 18, Microsoft Visual C++ Redistributable 2017 (vcredist2017.exe) is automatically installed.
If a computer does not have the most recent Windows updates, the installation of Microsoft Visual C++ Redistributable 2017 will fail in installing Universal C Runtime. The following Windows updates must be installed to prevent the installation failure. The updates are not required on the most recent Windows operating system versions, such as Microsoft Windows 10 and Microsoft Windows Server 2016, because these versions have the Universal C Runtime already installed.
-
KB2919355
-
KB2939087
-
KB2975061
-
KB2999226
DISCLAIMER
Certain third-party software and service releases (together, "Releases") may not be supported by Commvault. You are solely responsible for ensuring Commvault’s products and services are compatible with any such Releases.