Deduplication Partitioned mode configuration uses multiple MediaAgents (two to four, in a grid) to host individual physical partitions of a larger logical Deduplication Database (DDB), one DDB per MediaAgent. This configuration is typically used to increase the amount of FET or BET a single DDB can manage. For details on supported platforms, see Building Block Guide - Deduplication System Requirements.
The following table provides the hardware requirements for MediaAgent hosting two partitions of the DDB in large and extra-large environments. For medium, small and extra small environments, partitioned mode is not recommended except when there is a requirement for resiliency (partition failover - when one of the partition is temporarily unavailable).
Terms that are used in the following Hardware Requirements:
-
Deduplication Node - MediaAgent hosting the DDB.
-
Grid - The collection of the deduplication nodes.
Important
-
The following hardware requirements are applicable for MediaAgents with deduplication. The requirements do not apply for tape libraries or MediaAgents without deduplication or using third party deduplication applications.
-
The suggested workloads are not software limitations, rather design guidelines for sizing under specific conditions.
-
The TB values are base-2.
-
To achieve the required IOPs, please consult your hardware vendor for the most suitable configuration for your implementation.
-
The index cache disk recommendation is for unstructured data types like files, VMs and granular messages. Structured data types like application, databases and so on need significantly less index cache. The recommendations given are per MediaAgent.
-
It is recommended to use dedicated volumes for index cache disk and DDB disk.
Number of Nodes, Backend, and CPU/RAM
Components |
Extra large |
Large |
---|---|---|
Number of Nodes in Grid |
2 |
2 |
Grid Backend Storage2, 3 |
Up to 500 TB |
Up to 300 TB |
CPU/RAM per Deduplication Node |
16 cores, 128 GB (or 16 vCPUs/128 GB) |
12 cores, 64 GB (or 12 vCPUs/64 GB) |
Disk Layout per Deduplication Node
Components |
Extra large |
Large |
---|---|---|
OS or Software Disk |
400 GB SSD class disk |
400 GB usable disk, min 4 spindles 15K RPM or higher OR SSD class disk |
DDB Disk1 |
2 TB SSD Class Disk/PCIe IO Cards4 2 GB Controller Cache Memory For Linux, the DDB volume must be configured by using the Logical Volume Management (LVM) package.9 See Building Block Guide - Deduplication Database |
1.2 TB SSD Class Disk/PCIe IO Cards4 2 GB Controller Cache Memory For Linux, the DDB volume must be configured by using the Logical Volume Management (LVM) package.9 See Building Block Guide - Deduplication Database |
Suggested IOPS for each DDB Disk |
20K dedicated Random IOPS5 |
15K dedicated Random IOPS5 |
Index Cache Disk1, 7, 8 |
2 TB SSD Class Disk4, 6 |
1 TB SSD Class Disk4, 6 |
Suggested Workloads for Grid
Components |
Extra large |
Large |
---|---|---|
400 |
300 |
|
Laptop Clients for Grid |
Up to 10000 per Grid |
Up to 5000 per Grid |
Front End Terabytes (FET) Range per Grid |
120 TB to 200 TB |
100 TB to 160 TB |
Network Backups for Grid |
Note Combination of above data types not to exceed 150 TB FET |
Note Combination of above data types not to exceed 120 TB FET |
LAN-Free Backups for Grid |
|
|
Supported Targets
Components |
Extra large |
Large |
---|---|---|
Tape Drives |
|
|
Disk Storage without Commvault Deduplication |
Not Recommended |
Not Recommended |
Deduplication Disk Storage |
Up to 500 TB Direct Attached (OR) NAS |
Up to 300 TB Direct Attached (OR) NAS |
Third-Party Deduplication Appliances |
Not recommended |
Not Recommended |
Cloud Storage |
|
|
Deploying MediaAgent on Cloud / Virtual Environments |
Yes, for AWS or Azure Sizing, see the following guides: |
Yes, for AWS or Azure Sizing, see the following guides: |
Footnotes
-
It is recommended to use dedicated volumes for index cache disk and DDB disk.
-
Maximum size per DDB.
-
Assumes standard retention of up to 90 days. Larger retention will affect FET managed by this configuration, the back end capacity remains the same.
-
SSD class disk indicates PCIe based cards or internal dedicated endurance value drives. We recommend to use MLCs (Multi-Level Cells) class or better SSDs.
-
Recommend dedicated RAID 1 or RAID 10 group.
-
Recommendation for unstructured data types like files, VMs and granular messages. Structured data types like applications and databases require considerably less index cache.
-
To improve the indexing performance, it is recommended that you store your index data on a solid-state drive. The following agents and cases require the best possible indexing performance:
-
Exchange Mailbox Agent
-
Virtual Server Agents
-
NAS filers running NDMP backups
-
Backing up large file servers
-
SharePoint Agents
-
Ensuring maximum performance whenever it is critical
-
-
The index cache directory must be on a local drive. Network shares are not supported.
-
For Linux, host the DDB on LVM volumes. This helps DDB Backups by using LVM software for snapshots. It is recommended to use thin provisioned LV for DDB volumes to get better Query-Insert performance during the DDB backups.
Related Topics
Tuning Performance When Using a Partitioned Deduplication Database